Hello Fabio, On Tue, Dec 12, 2023 at 08:28:15AM -0300, Hiago De Franco wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > Later versions of Colibri iMX7D V1.1B modules use a "new" SoC fusing. The > difference lies in whether we enable the boot ROM to use the eMMC reset > signal. Depending on the SoC fuse, the boot ROM configures this pin as a > GPIO output to drive the reset signal. Our eMMC vs NAND detection > currently only sets that signal to a GPIO without explicitly setting any > direction. Previously, by default, it was set as an input. As the boot ROM > now configures it as an output, we receive a value of zero instead of one, > indicating the absence of the pull-up on eMMC modules. ... > Fixes: 0c39564d ("toradex: colibri_imx7: Enable nand/emmc detection and set > boot variant")
It would be nice to have this fix in for 2024.01, if possible, thanks! Francesco