Add support for driver model where EEPROM data are read in draco board. Reviewed-by: Alexander Sverdlin <alexander.sverd...@siemens.com> Signed-off-by: Enrico Leto <enrico.l...@siemens.com> --- configs/draco-etamin_defconfig | 4 +++- configs/draco-rastaban_defconfig | 4 +++- configs/draco-thuban_defconfig | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/configs/draco-etamin_defconfig b/configs/draco-etamin_defconfig index ef7c7c1a549..9e25a7048e8 100644 --- a/configs/draco-etamin_defconfig +++ b/configs/draco-etamin_defconfig @@ -86,8 +86,10 @@ CONFIG_CLK=y CONFIG_CLK_TI_CTRL=y CONFIG_DFU_NAND=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y +# CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y # CONFIG_SPL_DM_MMC is not set CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y diff --git a/configs/draco-rastaban_defconfig b/configs/draco-rastaban_defconfig index b293ed5ef70..1a7cf8257b9 100644 --- a/configs/draco-rastaban_defconfig +++ b/configs/draco-rastaban_defconfig @@ -84,8 +84,10 @@ CONFIG_CLK=y CONFIG_CLK_TI_CTRL=y CONFIG_DFU_NAND=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y +# CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/draco-thuban_defconfig b/configs/draco-thuban_defconfig index 6c03732d4a9..3c7facfbacd 100644 --- a/configs/draco-thuban_defconfig +++ b/configs/draco-thuban_defconfig @@ -84,8 +84,10 @@ CONFIG_CLK=y CONFIG_CLK_TI_CTRL=y CONFIG_DFU_NAND=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y +# CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y -- 2.30.2
