From: Anthony Loiseau <anthony.lois...@allcircuits.com>
As already done for NOR chips, if device ESIZE and ENVSECTORS static
configurations are both zero, then autodetect them at runtime.
Cc: Joe Hershberger <joe.hershber...@ni.com>
cc: Stefan Agner <ste...@agner.ch>
cc: Rasmus Villemoes <rasmus.villem...@prevas.dk>
Signed-off-by: Anthony Loiseau <anthony.lois...@allcircuits.com>
---
tools/env/README | 3 +++
tools/env/fw_env.c | 11 +++++++++--
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/tools/env/README b/tools/env/README
index 480a893202..b8c6a7e197 100644
--- a/tools/env/README
+++ b/tools/env/README
@@ -58,6 +58,9 @@ DEVICEx_ENVSECTORS defines the number of sectors that may be
used for
this environment instance. On NAND this is used to limit the range
within which bad blocks are skipped, on NOR it is not used.
+If DEVICEx_ESIZE and DEVICEx_ENVSECTORS are both zero, then a runtime
+detection is attempted for NOR and NAND mtd types.
+
To prevent losing changes to the environment and to prevent confusing the MTD
drivers, a lock file at /run/fw_printenv.lock is used to serialize access
to the environment.
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index c9a8774ace..9f57f19d80 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -1659,8 +1659,15 @@ static int check_device_config(int dev)
}
DEVTYPE(dev) = mtdinfo.type;
if (DEVESIZE(dev) == 0 && ENVSECTORS(dev) == 0 &&
- mtdinfo.type == MTD_NORFLASH)
- DEVESIZE(dev) = mtdinfo.erasesize;
+ mtdinfo.erasesize > 0) {
+ if (mtdinfo.type == MTD_NORFLASH)
+ DEVESIZE(dev) = mtdinfo.erasesize;
+ else if (mtdinfo.type == MTD_NANDFLASH) {
+ DEVESIZE(dev) = mtdinfo.erasesize;
+ ENVSECTORS(dev) =
+ mtdinfo.size / mtdinfo.erasesize;
+ }
+ }
if (DEVESIZE(dev) == 0)
/* Assume the erase size is the same as the env-size */
DEVESIZE(dev) = ENVSIZE(dev);
--
2.11.0
