With the Linux and U-Boot board files unified, we now have a duplicate
wkup_uart0 node. Remove it
Tested-by: Tom Rini <tr...@konsulko.com>
Signed-off-by: Bryan Brattlof <b...@ti.com>
---
arch/arm/dts/k3-am654-r5-base-board.dts | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts
b/arch/arm/dts/k3-am654-r5-base-board.dts
index 50e6be6118294..fb13a17b1dc64 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -18,7 +18,6 @@
ethernet0 = &cpsw_port1;
remoteproc0 = &sysctrler;
remoteproc1 = &a53_0;
- serial0 = &wkup_uart0;
serial1 = &mcu_uart0;
serial2 = &main_uart0;
spi0 = &ospi0;
@@ -117,8 +116,6 @@
};
&wkup_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_uart0_pins_default>;
status = "okay";
bootph-pre-ram;
};
@@ -146,15 +143,6 @@
};
&wkup_pmx0 {
- wkup_uart0_pins_default: wkup_uart0_pins_default {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1)
WKUP_UART0_RXD */
- AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5)
WKUP_UART0_TXD */
- AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2)
WKUP_GPIO0_6.WKUP_UART0_CTSn */
- AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1)
WKUP_GPIO0_7.WKUP_UART0_RTSn */
- >;
- };
-
wkup_vtt_pins_default: wkup_vtt_pins_default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /*
WKUP_GPIO0_28 */
--
2.43.0
