On 1/8/24 11:32 AM, Nishanth Menon wrote:
Stop using the findfdt script and switch to setting the fdtfile from C
code.
While at this, replace findfdt in environment with a warning as it is
no longer needed
Signed-off-by: Nishanth Menon <n...@ti.com>
---
board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++
board/beagle/beagleboneai64/beagleboneai64.env | 1 -
configs/j721e_beagleboneai64_a72_defconfig | 3 ++-
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/board/beagle/beagleboneai64/beagleboneai64.c
b/board/beagle/beagleboneai64/beagleboneai64.c
index c8c1c78ae5a2..1982f738b04e 100644
--- a/board/beagle/beagleboneai64/beagleboneai64.c
+++ b/board/beagle/beagleboneai64/beagleboneai64.c
@@ -28,3 +28,17 @@ int dram_init_banksize(void)
{
return fdtdec_setup_memory_banksize();
}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ char fdtfile[50];
+
+ snprintf(fdtfile, sizeof(fdtfile), "%s/%s.dtb",
+ CONFIG_TI_EVM_FDT_FOLDER_PATH, CONFIG_DEFAULT_DEVICE_TREE);
+
Why not use your new ti_set_fdt_env() helper? It makes this board
consistent with TI boards (sets "name_fdt" and adds warning for
"findfdt" like your commit message says you do..).
Andrew
+ env_set("fdtfile", fdtfile);
+
+ return 0;
+}
+#endif
diff --git a/board/beagle/beagleboneai64/beagleboneai64.env
b/board/beagle/beagleboneai64/beagleboneai64.env
index 4f0a94a8113e..647b25d14c8e 100644
--- a/board/beagle/beagleboneai64/beagleboneai64.env
+++ b/board/beagle/beagleboneai64/beagleboneai64.env
@@ -1,5 +1,4 @@
#include <env/ti/ti_common.env>
-#include <env/ti/default_findfdt.env>
#include <env/ti/mmc.env>
name_kern=Image
diff --git a/configs/j721e_beagleboneai64_a72_defconfig
b/configs/j721e_beagleboneai64_a72_defconfig
index 959f86844d32..9e53658eacb9 100644
--- a/configs/j721e_beagleboneai64_a72_defconfig
+++ b/configs/j721e_beagleboneai64_a72_defconfig
@@ -34,7 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d
seconds\n"
CONFIG_AUTOBOOT_DELAY_STR="d"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow
scan -lb;run set_led_state_fail_load"
+CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan
-lb;run set_led_state_fail_load"
+CONFIG_BOARD_LATE_INIT=y
CONFIG_LOGLEVEL=7
CONFIG_SPL_MAX_SIZE=0xc0000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
