+Ye
在 1/9/2024 4:52 PM, Thomas Schaefer 写道:
Hi all,
We are trying to enable FIELD RETURN on the NXP i.MX8MNano LPD4 EVK board.
We enabled Secure Boot in u-boot in the first step. After checking proper
execution of a signed bootloader image we closed the board blowing the
SEC_CONFIG fuse.
In the next step we created the board specific signature with UID of the CPU
included to remove the FIELD RETURN lock. After that we were able to blow the
FIELD_RETURN fuse with 'fuse prog 8 3 0x1' command. But now, the board cannot
boot any more, it will hang after execution of the SPL bootloader part.
We can observe this behavior with both signed and unsigned bootloader images.
Is the FIELD_RETURN feature for the i.MX8MNano supported with u-boot v2024.01?
Best regards,
Thomas
Thomas Schäfer
SW Design Engineer
thomas.schae...@kontron.com
www.kontron.com
Kontron Europe GmbH
Heinrich-Barth-Straße 1-1a | 66115 Saarbrücken | Germany
