On 12:17-20240112, Siddharth Vadapalli wrote: > From: Kishon Vijay Abraham I <kis...@ti.com> > > Enable config options needed to support Ethernet boot on AM62x SK. > > Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com> > Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> > --- > configs/am62x_evm_a53_defconfig | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig > index aa96c1b312..5c56b17a3e 100644 > --- a/configs/am62x_evm_a53_defconfig > +++ b/configs/am62x_evm_a53_defconfig > @@ -17,6 +17,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y > CONFIG_DM_RESET=y > CONFIG_SPL_MMC=y > CONFIG_SPL_SERIAL=y > +CONFIG_SPL_DRIVERS_MISC=y > CONFIG_SPL_STACK_R_ADDR=0x82000000 > CONFIG_SPL_SIZE_LIMIT=0x40000 > CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800 > @@ -37,13 +38,19 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y > CONFIG_SPL_BSS_START_ADDR=0x80c80000 > CONFIG_SPL_BSS_MAX_SIZE=0x80000 > CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y > +CONFIG_SPL_BOARD_INIT=y > CONFIG_SPL_SYS_MALLOC_SIMPLE=y > CONFIG_SPL_STACK_R=y > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 > +CONFIG_SPL_DMA=y > +CONFIG_SPL_ENV_SUPPORT=y > +CONFIG_SPL_ETH=y > CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" > CONFIG_SPL_DM_MAILBOX=y > CONFIG_SPL_DM_SPI_FLASH=y > +CONFIG_SPL_NET=y > +CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL" > CONFIG_SPL_POWER_DOMAIN=y > # CONFIG_SPL_SPI_FLASH_TINY is not set > CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y > @@ -61,6 +68,7 @@ CONFIG_SPL_DM=y > CONFIG_SPL_DM_SEQ_ALIAS=y > CONFIG_REGMAP=y > CONFIG_SPL_REGMAP=y > +CONFIG_SPL_SYSCON=y > CONFIG_SPL_OF_TRANSLATE=y > CONFIG_CLK=y > CONFIG_SPL_CLK=y > -- > 2.34.1 >
NAK again - why cant we use config fragments? -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
