Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---
Changes in v2:
- fix CONFIG name with 'x': TARGET_ST_STM32MP15x TARGET_ST_STM32MP13x
arch/arm/mach-stm32mp/include/mach/stm32.h | 1 +
board/st/common/Kconfig | 2 +-
board/st/common/cmd_stboard.c | 2 ++
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h
b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 45c929aa605d..726c390977e3 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -198,6 +198,7 @@ enum forced_boot_mode {
#define BSEC_OTP_SERIAL 5
#define BSEC_OTP_RPN 9
#define BSEC_OTP_PKG 122
+#define BSEC_OTP_BOARD 246
#define BSEC_OTP_MAC 247
#endif
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index c1c254d07354..f40d1a78ca36 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,7 +1,7 @@
config CMD_STBOARD
bool "stboard - command for OTP board information"
depends on ARCH_STM32MP
- default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
+ default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x ||
TARGET_ST_STM32MP13x
help
This compile the stboard command to
read and write the board in the OTP.
diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c
index 853ab78bbf16..cb103e69b369 100644
--- a/board/st/common/cmd_stboard.c
+++ b/board/st/common/cmd_stboard.c
@@ -49,7 +49,9 @@ static bool check_stboard(u16 board)
0x1298,
0x1341,
0x1497,
+ 0x1605, /* stm32mp25xx-dk */
0x1635,
+ 0x1936, /* stm32mp25xx-ev1 */
};
for (i = 0; i < ARRAY_SIZE(st_board_id); i++)
--
2.25.1
