Hi Mathieu, I already gave my review on the kernel mailing list.
As first step, naming scheme is not compatible with PHYTEC naming convention. Please fix it across the entire patch. Maybe reference downstream u-boot for that? Please also use "phyBOARD-Segin-i.MX93" when referencing the board as this is the official board name. On 17. 01. 24 08:52, Mathieu Othacehe wrote: > Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists > of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC. > > Signed-off-by: Mathieu Othacehe <othac...@gnu.org> > --- > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/imx93-phycore-segin-u-boot.dtsi | 274 +++ > arch/arm/dts/imx93-phycore-segin.dts | 95 +> > arch/arm/dts/imx93-phycore-som.dtsi | 64 + > arch/arm/mach-imx/imx9/Kconfig | 6 + > board/phytec/common/mmc.c | 49 + > board/phytec/imx93_phycore/Kconfig | 21 + > board/phytec/imx93_phycore/MAINTAINERS | 10 + > board/phytec/imx93_phycore/Makefile | 16 + > board/phytec/imx93_phycore/imx93_phycore.c | 89 + > board/phytec/imx93_phycore/imx93_phycore.env | 96 + s/imx93_phycore/phycore_imx93 To fit into existing PHYTEC boards already in tree. > .../phytec/imx93_phycore/lpddr4_timing_1GB.c | 1546 +++++++++++++++++ Remove _1GB suffix. PHYTEC DRAM auto-detection will follow later. > board/phytec/imx93_phycore/spl.c | 181 ++ > configs/imx93_phycore_defconfig | 147 ++ should be phycore-imx93_defconfig > doc/board/phytec/imx93_phycore.rst | 68 + > doc/board/phytec/index.rst | 1 + > include/configs/imx93_phycore.h | 47 + > 17 files changed, 2712 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi > create mode 100644 arch/arm/dts/imx93-phycore-segin.dts > create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi > create mode 100644 board/phytec/common/mmc.c > create mode 100644 board/phytec/imx93_phycore/Kconfig > create mode 100644 board/phytec/imx93_phycore/MAINTAINERS > create mode 100644 board/phytec/imx93_phycore/Makefile > create mode 100644 board/phytec/imx93_phycore/imx93_phycore.c > create mode 100644 board/phytec/imx93_phycore/imx93_phycore.env > create mode 100644 board/phytec/imx93_phycore/lpddr4_timing_1GB.c > create mode 100644 board/phytec/imx93_phycore/spl.c > create mode 100644 configs/imx93_phycore_defconfig > create mode 100644 doc/board/phytec/imx93_phycore.rst > create mode 100644 include/configs/imx93_phycore.h > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index d456a524b36..4a23e2a2f49 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ > > dtb-$(CONFIG_ARCH_IMX9) += \ > imx93-11x11-evk.dtb \ > - imx93-var-som-symphony.dtb > + imx93-var-som-symphony.dtb \ > + imx93-phycore-segin.dtb s/imx93-phycore-segin/imx93-phyboard-segin > > dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ > imxrt1020-evk.dtb \ > diff --git a/arch/arm/dts/imx93-phycore-segin-u-boot.dtsi > b/arch/arm/dts/imx93-phycore-segin-u-boot.dtsi > new file mode 100644 > index 00000000000..6d75f1985aa > --- /dev/null > +++ b/arch/arm/dts/imx93-phycore-segin-u-boot.dtsi > @@ -0,0 +1,274 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + * > + * Product homepage: > + * phyBOARD-Segin carrier board is reused for the i.MX93 design. > + * > https://www.phytec.de/produkte/single-board-computer/phyboard-segin-imx6ul/ > + */ > + Please sync header with what you have sent to linux mailing lists. > +#include "imx93-u-boot.dtsi" > + > +/ { > + wdt-reboot { > + compatible = "wdt-reboot"; > + wdt = <&wdog3>; > + bootph-pre-ram; > + bootph-some-ram; > + }; > + > + aliases { > + ethernet0 = &eqos;> + ethernet1 = &fec; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > +}; > + > +&{/soc@0} { > + bootph-all; > + bootph-pre-ram; > +}; > + > +&aips1 { > + bootph-pre-ram; > + bootph-all; > +}; > + > +&aips2 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&aips3 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&iomuxc { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +®_usdhc2_vmmc { > + u-boot,off-on-delay-us = <20000>; > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&pinctrl_reg_usdhc2_vmmc { > + bootph-pre-ram; > +}; > + > +&pinctrl_uart1 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&pinctrl_usdhc2 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&gpio1 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&gpio2 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&gpio3 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&gpio4 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&lpuart1 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&usdhc1 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&usdhc2 { > + bootph-pre-ram; > + bootph-some-ram; > + fsl,signal-voltage-switch-extra-delay-ms = <8>; > +}; > + > +&lpi2c1 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&lpi2c2 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&lpi2c3 { > + bootph-pre-ram; > + bootph-some-ram; > +}; > + > +&s4muap { > + bootph-pre-ram; > + bootph-some-ram; > + status = "okay"; > +}; > + > +&clk { > + bootph-all; > + bootph-pre-ram; > + /delete-property/ assigned-clocks; > + /delete-property/ assigned-clock-rates; > + /delete-property/ assigned-clock-parents; > +}; > + > +&osc_32k { > + bootph-all; > + bootph-pre-ram; > +}; > + > +&osc_24m { > + bootph-all; > + bootph-pre-ram; > +}; > + > +&clk_ext1 { > + bootph-all; > + bootph-pre-ram; > +}; > + > +/* > + * The two nodes below won't be needed once nxp,pca9451a > + * support is added to the Linux kernel. > + */ > +&iomuxc { > + pinctrl_lpi2c3: lpi2c3grp { > + bootph-pre-ram; > + fsl,pins = < > + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e > + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e > + >; > + }; > +}; > + > +&lpi2c3 { > + bootph-pre-ram; > + bootph-some-ram; > + clock-frequency = <400000>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_lpi2c3>; > + pinctrl-1 = <&pinctrl_lpi2c3>; > + status = "okay"; > + > + pmic@25 { > + bootph-pre-ram; > + bootph-some-ram; > + compatible = "nxp,pca9451a"; > + reg = <0x25>; > + pinctrl-names = "default"; > + > + regulators { > + bootph-pre-ram; > + buck1: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck2: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck4: BUCK4{ > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5: BUCK5{ > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck6: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3: LDO3 { > + regulator-name = "LDO3"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo5: LDO5 { > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > diff --git a/arch/arm/dts/imx93-phycore-segin.dts > b/arch/arm/dts/imx93-phycore-segin.dts > new file mode 100644 > index 00000000000..a843b322a07 > --- /dev/null > +++ b/arch/arm/dts/imx93-phycore-segin.dts Rename to imx93-phyboard-segin.dts and see my linux kernel mailing list comments. > @@ -0,0 +1,95 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + * Copyright (C) 2024 Mathieu Othacehe <m.othac...@gmail.com> > + * > + */ > +/dts-v1/; > + > +#include "imx93-phycore-som.dtsi" > + > +/{ > + model = "PHYTEC phyBOARD-Segin-i.MX93"; > + compatible = "phytec,imx93-phycore-segin", "phytec,imx93-phycore-som", > + "fsl,imx93"; > + > + chosen { > + stdout-path = &lpuart1; > + }; > + > + reg_usdhc2_vmmc: regulator-usdhc2 { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > +}; > + > +/* Console */ > +&lpuart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>; > + clock-names = "ipg", "per"; > + status = "okay"; > +}; > + > +/* SD-Card */ > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; > + vmmc-supply = <®_usdhc2_vmmc>; > + bus-width = <4>; > + status = "okay"; > + no-sdio; > + no-mmc; > +}; > + > +/* Watchdog */ > +&wdog3 { > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + status = "okay"; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e > + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e > + >; > + }; > + > + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { > + fsl,pins = < > + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > + fsl,pins = < > + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX93_PAD_SD2_CLK__USDHC2_CLK 0x178e > + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e > + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e > + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e > + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e > + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e > + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e > + >; > + }; > +}; > diff --git a/arch/arm/dts/imx93-phycore-som.dtsi > b/arch/arm/dts/imx93-phycore-som.dtsi > new file mode 100644 > index 00000000000..4edff4a50b2 > --- /dev/null > +++ b/arch/arm/dts/imx93-phycore-som.dtsi > @@ -0,0 +1,64 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + * Copyright (C) 2024 Mathieu Othacehe <m.othac...@gmail.com> > + * > + */ > +/dts-v1/; > + > +#include "imx93.dtsi" > + > +/{ > + model = "PHYTEC phyCORE-i.MX93"; > + compatible = "phytec,imx93-phycore-som", "fsl,imx93"; > + > + reserved-memory { > + ranges; > + #address-cells = <2>; > + #size-cells = <2>; > + > + linux,cma { > + compatible = "shared-dma-pool"; > + reusable; > + alloc-ranges = <0 0x80000000 0 0x40000000>; > + size = <0 0x10000000>; > + linux,cma-default; > + }; > + > + ele_reserved: ele-reserved@a4120000 { > + compatible = "shared-dma-pool"; > + reg = <0 0xa4120000 0 0x100000>; > + no-map; > + }; > + }; > +}; > + > +/* eMMC */ > +&usdhc1 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1>; > + pinctrl-2 = <&pinctrl_usdhc1>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe > + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe > + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe > + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe > + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe > + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe > + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe > + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe > + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe > + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe > + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe > + >; > + }; > +}; > diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig > index 961d6f527ab..0c1459c5cde 100644 > --- a/arch/arm/mach-imx/imx9/Kconfig > +++ b/arch/arm/mach-imx/imx9/Kconfig > @@ -37,10 +37,16 @@ config TARGET_IMX93_VAR_SOM > select IMX93 > select IMX9_LPDDR4X > > +config TARGET_IMX93_PHYCORE s/TARGET_IMX93_PHYCORE/TARGET_PHYCORE_IMX93 > + bool "imx93_phycore" s/imx93_phycore/phycore_imx93 > + select IMX93 > + select IMX9_LPDDR4X > + > endchoice > > source "board/freescale/imx93_evk/Kconfig" > source "board/variscite/imx93_var_som/Kconfig" > +source "board/phytec/imx93_phycore/Kconfig" > > endif > > diff --git a/board/phytec/common/mmc.c b/board/phytec/common/mmc.c > new file mode 100644 > index 00000000000..d747aef232f > --- /dev/null > +++ b/board/phytec/common/mmc.c Couldn't you put this somewhere really common? > @@ -0,0 +1,49 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2016 Freescale Semiconductor, Inc. > + * Copyright 2018-2022 NXP > + */ > + > +#include <command.h> > +#include <asm/arch/sys_proto.h> > +#include <linux/errno.h> > +#include <asm/io.h> > +#include <stdbool.h> > +#include <vsprintf.h> > +#include <mmc.h> > +#include <env.h> > + > +static int check_mmc_autodetect(void) > +{ > + char *autodetect_str = env_get("mmcautodetect"); > + > + if (autodetect_str && !strcmp(autodetect_str, "yes")) > + return 1; > + > + return 0; > +} > + > +/* This should be defined for each board */ > +__weak int mmc_map_to_kernel_blk(int dev_no) > +{ > + return dev_no; > +} > + > +void board_late_mmc_env_init(void) > +{ > + char cmd[32]; > + char mmcblk[32]; > + u32 dev_no = mmc_get_env_dev(); > + > + if (!check_mmc_autodetect()) > + return; > + > + env_set_ulong("mmcdev", dev_no); > + > + /* Set mmcblk env */ > + sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", > mmc_map_to_kernel_blk(dev_no)); > + env_set("mmcroot", mmcblk); > + > + sprintf(cmd, "mmc dev %d", dev_no); > + run_command(cmd, 0); > +} > diff --git a/board/phytec/imx93_phycore/Kconfig > b/board/phytec/imx93_phycore/Kconfig > new file mode 100644 > index 00000000000..344df57afb0 > --- /dev/null > +++ b/board/phytec/imx93_phycore/Kconfig > @@ -0,0 +1,21 @@ > + > +if TARGET_IMX93_PHYCORE > + > +config SYS_BOARD > + default "imx93_phycore" > + > +config SYS_VENDOR > + default "phytec" > + > +config SYS_CONFIG_NAME > + default "imx93_phycore" > + > +config IMX93_PHYCORE_LPDDR4X_1GB No need for this Kconfig option. You only have 1GB RAM configuration. > + bool "Using LPDDR4X Timing and size of 1GB" > + default y > + select IMX9_LPDDR4X > + help > + Select the LPDDR4X timing and size of 1GB > + > + This sets the LPDDR4X timing and size of 1GB. > +endif > diff --git a/board/phytec/imx93_phycore/MAINTAINERS > b/board/phytec/imx93_phycore/MAINTAINERS > new file mode 100644 > index 00000000000..deea6f36327 > --- /dev/null > +++ b/board/phytec/imx93_phycore/MAINTAINERS > @@ -0,0 +1,10 @@ > +phyCORE-i.MX93 > +M: Mathieu Othacehe <m.othac...@gmail.com> > +W: https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/ Please link to .eu website which is in english by default. https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ > +S: Maintained > +F: arch/arm/dts/imx93-phycore-segin.dts > +F: arch/arm/dts/imx93-phycore-som.dtsi > +F: arch/arm/dts/imx93-phycore-segin-u-boot.dtsi > +F: board/phytec/imx93_phycore/ > +F: configs/imx93_phycore_defconfig > +F: include/configs/imx93_phycore.h > diff --git a/board/phytec/imx93_phycore/Makefile > b/board/phytec/imx93_phycore/Makefile > new file mode 100644 > index 00000000000..058663b7f8a > --- /dev/null > +++ b/board/phytec/imx93_phycore/Makefile > @@ -0,0 +1,16 @@ > +# > +# Copyright 2022 NXP > +# Copyright (C) 2023 PHYTEC Messtechnik GmbH > +# Christoph Stoidner <c.stoid...@phytec.de> > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > + > +obj-y += imx93_phycore.o > + > +ifdef CONFIG_SPL_BUILD > +obj-y += spl.o > +obj-$(CONFIG_IMX93_PHYCORE_LPDDR4X_1GB) += lpddr4_timing_1GB.o > +else > +obj-y += ../common/mmc.o > +endif > diff --git a/board/phytec/imx93_phycore/imx93_phycore.c > b/board/phytec/imx93_phycore/imx93_phycore.c > new file mode 100644 > index 00000000000..2a434637399 > --- /dev/null > +++ b/board/phytec/imx93_phycore/imx93_phycore.c > @@ -0,0 +1,89 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2022 NXP > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + */ > + > +#include <env.h> > +#include <init.h> > +#include <miiphy.h> > +#include <netdev.h> > +#include <asm/global_data.h> > +#include <asm/arch-imx9/ccm_regs.h> > +#include <asm/arch/sys_proto.h> > +#include <asm/arch-imx9/imx93_pins.h> > +#include <asm/arch/clock.h> > +#include <power/pmic.h> > +#include <dm/device.h> > +#include <dm/uclass.h> > +#include <usb.h> > +#include <dwc3-uboot.h> > +#include <asm/gpio.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +#define UART_PAD_CTRL (PAD_CTL_DSE(6) | PAD_CTL_FSEL2) > +#define WDOG_PAD_CTRL (PAD_CTL_DSE(6) | PAD_CTL_ODE | PAD_CTL_PUE | > PAD_CTL_PE) Remove unused WDOG_PAD_CTL > + > +static const iomux_v3_cfg_t uart_pads[] = { > + MX93_PAD_UART1_RXD__LPUART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), > + MX93_PAD_UART1_TXD__LPUART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), > +}; > + > +int board_early_init_f(void) > +{ > + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); > + > + init_uart_clk(LPUART1_CLK_ROOT); Isn't this already handled by the DM? We removed this in downstream u-boot-imx already. > + > + return 0; > +} > + > +static int setup_fec(void) > +{ > + return set_clk_enet(ENET_125MHZ); Again handled already by the DM? > +} > + > +int board_phy_config(struct phy_device *phydev) > +{ > + if (phydev->drv->config) > + phydev->drv->config(phydev);> + > + return 0; > +} > + > +static int setup_eqos(void) > +{ > + struct blk_ctrl_wakeupmix_regs *bctrl = > + (struct blk_ctrl_wakeupmix_regs *)BLK_CTRL_WAKEUPMIX_BASE_ADDR; > + > + /* set INTF as RGMII, enable RGMII TXC clock */ > + clrsetbits_le32(&bctrl->eqos_gpr, > + BCTRL_GPR_ENET_QOS_INTF_MODE_MASK, > + BCTRL_GPR_ENET_QOS_INTF_SEL_RGMII | > BCTRL_GPR_ENET_QOS_CLK_GEN_EN); > + > + return set_clk_eqos(ENET_125MHZ); > + > + return 0; > +} > + > +int board_init(void) > +{ > + if (IS_ENABLED(CONFIG_FEC_MXC)) > + setup_fec(); > + > + if (IS_ENABLED(CONFIG_DWC_ETH_QOS)) > + setup_eqos(); Did you check and eqos works? If not remove it... > + > + return 0; > +} > + > +int board_late_init(void) > +{ > + env_set("sec_boot", "no"); > + if (IS_ENABLED(CONFIG_AHAB_BOOT)) > + env_set("sec_boot", "yes"); > + > + return 0; > +} > diff --git a/board/phytec/imx93_phycore/imx93_phycore.env > b/board/phytec/imx93_phycore/imx93_phycore.env > new file mode 100644 > index 00000000000..75f28459b77 > --- /dev/null > +++ b/board/phytec/imx93_phycore/imx93_phycore.env > @@ -0,0 +1,96 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > + > +image=Image > +console=ttyLP0 > +fdt_addr=0x83000000 > +fdto_addr=0x830c0000 > +bootenv_addr=0x83500000 > +fdt_file=CONFIG_DEFAULT_FDT_FILE > +ipaddr=192.168.3.11 > +serverip=192.168.3.10 > +netmask=255.255.255.0 > +ip_dyn=no > +bootenv=bootenv.txt > +mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv} > +mmcdev=__stringify(CONFIG_SYS_MMC_ENV_DEV) > +mmcpart=1 > +mmcroot=2 > +mmcautodetect=yes > +mmcargs=setenv bootargs console=${console},${baudrate} earlycon > + root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw > +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} > +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file} > +mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay} > +mmc_apply_overlays= > + fdt address ${fdt_addr}; > + for overlay in ${overlays}; > + do; > + if run mmc_load_overlay; then > + fdt resize ${filesize}; > + fdt apply ${fdto_addr}; > + fi; > + done; > +mmcboot= > + echo Booting from mmc ...; > + if run mmc_load_bootenv; then > + env import -t ${bootenv_addr} ${filesize}; > + fi; > + run mmcargs; > + if run loadfdt; then > + run mmc_apply_overlays; > + booti ${loadaddr} - ${fdt_addr}; > + else > + echo WARN: Cannot load the DT; > + fi; > +nfsroot=/nfs > +netargs=setenv bootargs console=${console},${baudrate} earlycon > + root=/dev/nfs ip=${nfsip} nfsroot=${serverip}:${nfsroot},v3,tcp > +net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv} > +net_load_overlay=${get_cmd} ${fdto_addr} ${overlay} > +net_apply_overlays= > + fdt address ${fdt_addr}; > + for overlay in ${overlays}; > + do; > + if run net_load_overlay; then > + fdt resize ${filesize}; > + fdt apply ${fdto_addr}; > + fi; > + done; > +netboot= > + echo Booting from net ...; > + if test ${ip_dyn} = yes; then > + setenv nfsip dhcp; > + setenv get_cmd dhcp; > + else > + setenv nfsip ${ipaddr}:${serverip}::${netmask}::eth0:on; > + setenv get_cmd tftp; > + fi; > + if run net_load_bootenv; then > + env import -t ${bootenv_addr} ${filesize}; > + fi; > + run netargs; > + ${get_cmd} ${loadaddr} ${image}; > + if ${get_cmd} ${fdt_addr} ${fdt_file}; then > + run net_apply_overlays; > + booti ${loadaddr} - ${fdt_addr}; > + else > + echo WARN: Cannot load the DT; > + fi; > +bsp_bootcmd=echo Running BSP bootcmd ...; > + mmc dev ${mmcdev}; if mmc rescan; then > + if run loadbootscript; then > + run bootscript; > + else > + if test ${sec_boot} = yes; then > + if run loadcntr; then > + run mmcboot; > + else run netboot; > + fi; > + else > + if run loadimage; then > + run mmcboot; > + else run netboot; > + fi; > + fi; > + fi; > + fi; > \ No newline at end of file New line... > diff --git a/board/phytec/imx93_phycore/lpddr4_timing_1GB.c > b/board/phytec/imx93_phycore/lpddr4_timing_1GB.c > new file mode 100644 > index 00000000000..2111972a40e > --- /dev/null > +++ b/board/phytec/imx93_phycore/lpddr4_timing_1GB.c > @@ -0,0 +1,1546 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2023 NXP > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + * > + * Code generated with DDR Tool v1.0.0. > + */ > + > +#include <linux/kernel.h> > +#include <asm/arch/ddr.h> > + > +static struct dram_cfg_param ddr_ddrc_cfg[] = { > + /** Initialize DDRC registers **/ > + {0x4e300110, 0x44100001}, > + {0x4e300000, 0x8000bf}, > + {0x4e300008, 0x0}, > + {0x4e300080, 0x80000412}, > + {0x4e300084, 0x0}, > + {0x4e300114, 0x1002}, > + {0x4e300260, 0x4080}, > + {0x4e300f04, 0x80}, > + {0x4e300800, 0x43b30002}, > + {0x4e300804, 0x1f1f1f1f}, > + {0x4e301000, 0x0}, > + {0x4e301240, 0x0}, > + {0x4e301244, 0x0}, > + {0x4e301248, 0x0}, > + {0x4e30124c, 0x0}, > + {0x4e301250, 0x0}, > + {0x4e301254, 0x0}, > + {0x4e301258, 0x0}, > + {0x4e30125c, 0x0}, > + > +}; > + > +/* dram fsp cfg */ > +static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = { > + { > + { > + {0x4e300100, 0x24A0421B}, > + {0x4e300104, 0xF8EE001B}, > + {0x4e300108, 0x2F263233}, > + {0x4e30010C, 0x0005E18B}, > + {0x4e300124, 0x1C770000}, > + {0x4e300160, 0x00009102}, > + {0x4e30016C, 0x35F00000}, > + {0x4e300170, 0x8B0B0608}, > + {0x4e300250, 0x00000028}, > + {0x4e300254, 0x00FE00FE}, > + {0x4e300258, 0x00000008}, > + {0x4e30025C, 0x00000400}, > + {0x4e300300, 0x224F2215}, > + {0x4e300304, 0x00FE2213}, > + {0x4e300308, 0x0A3C0E3C}, > + }, > + { > + {0x01, 0xE4}, > + {0x02, 0x36}, > + {0x03, 0xF2}, > + {0x0b, 0x46}, > + {0x0c, 0x11}, > + {0x0e, 0x11}, > + {0x16, 0x04}, > + }, > + 0, > + }, > + > +}; > + > +/* PHY Initialize Configuration */ > +static struct dram_cfg_param ddr_ddrphy_cfg[] = { > + {0x100a0, 0x0}, > + {0x100a1, 0x1}, > + {0x100a2, 0x2}, > + {0x100a3, 0x3}, > + {0x100a4, 0x4}, > + {0x100a5, 0x5}, > + {0x100a6, 0x6}, > + {0x100a7, 0x7}, > + {0x110a0, 0x0}, > + {0x110a1, 0x1}, > + {0x110a2, 0x2}, > + {0x110a3, 0x3}, > + {0x110a4, 0x4}, > + {0x110a5, 0x5}, > + {0x110a6, 0x6}, > + {0x110a7, 0x7}, > + {0x1005f, 0x5ff}, > + {0x1015f, 0x5ff}, > + {0x1105f, 0x5ff}, > + {0x1115f, 0x5ff}, > + {0x55, 0x1ff}, > + {0x1055, 0x1ff}, > + {0x2055, 0x1ff}, > + {0x200c5, 0x19}, > + {0x2002e, 0x2}, > + {0x90204, 0x0}, > + {0x20024, 0x1e3}, > + {0x2003a, 0x2}, > + {0x2007d, 0x212}, > + {0x2007c, 0x61}, > + {0x20056, 0x3}, > + {0x1004d, 0x600}, > + {0x1014d, 0x600}, > + {0x1104d, 0x600}, > + {0x1114d, 0x600}, > + {0x10049, 0xe00}, > + {0x10149, 0xe00}, > + {0x11049, 0xe00}, > + {0x11149, 0xe00}, > + {0x43, 0x60}, > + {0x1043, 0x60}, > + {0x2043, 0x60}, > + {0x20018, 0x1}, > + {0x20075, 0x4}, > + {0x20050, 0x0}, > + {0x2009b, 0x2}, > + {0x20008, 0x3a5}, > + {0x20088, 0x9}, > + {0x200b2, 0x10c}, > + {0x10043, 0x5a1}, > + {0x10143, 0x5a1}, > + {0x11043, 0x5a1}, > + {0x11143, 0x5a1}, > + {0x200fa, 0x2}, > + {0x20019, 0x1}, > + {0x200f0, 0x600}, > + {0x200f1, 0x0}, > + {0x200f2, 0x4444}, > + {0x200f3, 0x8888}, > + {0x200f4, 0x5655}, > + {0x200f5, 0x0}, > + {0x200f6, 0x0}, > + {0x200f7, 0xf000}, > + {0x20025, 0x0}, > + {0x2002d, 0x1}, > + {0x2002c, 0x0}, > + {0x20021, 0x0}, > + {0x200c7, 0x21}, > + {0x1200c7, 0x21}, > + {0x200ca, 0x24}, > + {0x1200ca, 0x24}, > + > +}; > + > +/* ddr phy trained csr */ > +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = { > + {0x1005f, 0x0}, > + {0x1015f, 0x0}, > + {0x1105f, 0x0}, > + {0x1115f, 0x0}, > + {0x55, 0x0}, > + {0x1055, 0x0}, > + {0x2055, 0x0}, > + {0x200c5, 0x0}, > + {0x2002e, 0x0}, > + {0x90204, 0x0}, > + {0x20024, 0x0}, > + {0x2003a, 0x0}, > + {0x2007d, 0x0}, > + {0x2007c, 0x0}, > + {0x20056, 0x0}, > + {0x1004d, 0x0}, > + {0x1014d, 0x0}, > + {0x1104d, 0x0}, > + {0x1114d, 0x0}, > + {0x10049, 0x0}, > + {0x10149, 0x0}, > + {0x11049, 0x0}, > + {0x11149, 0x0}, > + {0x43, 0x0}, > + {0x1043, 0x0}, > + {0x2043, 0x0}, > + {0x20018, 0x0}, > + {0x20075, 0x0}, > + {0x20050, 0x0}, > + {0x2009b, 0x0}, > + {0x20008, 0x0}, > + {0x20088, 0x0}, > + {0x200b2, 0x0}, > + {0x10043, 0x0}, > + {0x10143, 0x0}, > + {0x11043, 0x0}, > + {0x11143, 0x0}, > + {0x200fa, 0x0}, > + {0x20019, 0x0}, > + {0x200f0, 0x0}, > + {0x200f1, 0x0}, > + {0x200f2, 0x0}, > + {0x200f3, 0x0}, > + {0x200f4, 0x0}, > + {0x200f5, 0x0}, > + {0x200f6, 0x0}, > + {0x200f7, 0x0}, > + {0x20025, 0x0}, > + {0x2002d, 0x0}, > + {0x2002c, 0x0}, > + {0xd0000, 0x0}, > + {0x90000, 0x0}, > + {0x90001, 0x0}, > + {0x90002, 0x0}, > + {0x90003, 0x0}, > + {0x90004, 0x0}, > + {0x90005, 0x0}, > + {0x90029, 0x0}, > + {0x9002a, 0x0}, > + {0x9002b, 0x0}, > + {0x9002c, 0x0}, > + {0x9002d, 0x0}, > + {0x9002e, 0x0}, > + {0x9002f, 0x0}, > + {0x90030, 0x0}, > + {0x90031, 0x0}, > + {0x90032, 0x0}, > + {0x90033, 0x0}, > + {0x90034, 0x0}, > + {0x90035, 0x0}, > + {0x90036, 0x0}, > + {0x90037, 0x0}, > + {0x90038, 0x0}, > + {0x90039, 0x0}, > + {0x9003a, 0x0}, > + {0x9003b, 0x0}, > + {0x9003c, 0x0}, > + {0x9003d, 0x0}, > + {0x9003e, 0x0}, > + {0x9003f, 0x0}, > + {0x90040, 0x0}, > + {0x90041, 0x0}, > + {0x90042, 0x0}, > + {0x90043, 0x0}, > + {0x90044, 0x0}, > + {0x90045, 0x0}, > + {0x90046, 0x0}, > + {0x90047, 0x0}, > + {0x90048, 0x0}, > + {0x90049, 0x0}, > + {0x9004a, 0x0}, > + {0x9004b, 0x0}, > + {0x9004c, 0x0}, > + {0x9004d, 0x0}, > + {0x9004e, 0x0}, > + {0x9004f, 0x0}, > + {0x90050, 0x0}, > + {0x90051, 0x0}, > + {0x90052, 0x0}, > + {0x90053, 0x0}, > + {0x90054, 0x0}, > + {0x90055, 0x0}, > + {0x90056, 0x0}, > + {0x90057, 0x0}, > + {0x90058, 0x0}, > + {0x90059, 0x0}, > + {0x9005a, 0x0}, > + {0x9005b, 0x0}, > + {0x9005c, 0x0}, > + {0x9005d, 0x0}, > + {0x9005e, 0x0}, > + {0x9005f, 0x0}, > + {0x90060, 0x0}, > + {0x90061, 0x0}, > + {0x90062, 0x0}, > + {0x90063, 0x0}, > + {0x90064, 0x0}, > + {0x90065, 0x0}, > + {0x90066, 0x0}, > + {0x90067, 0x0}, > + {0x90068, 0x0}, > + {0x90069, 0x0}, > + {0x9006a, 0x0}, > + {0x9006b, 0x0}, > + {0x9006c, 0x0}, > + {0x9006d, 0x0}, > + {0x9006e, 0x0}, > + {0x9006f, 0x0}, > + {0x90070, 0x0}, > + {0x90071, 0x0}, > + {0x90072, 0x0}, > + {0x90073, 0x0}, > + {0x90074, 0x0}, > + {0x90075, 0x0}, > + {0x90076, 0x0}, > + {0x90077, 0x0}, > + {0x90078, 0x0}, > + {0x90079, 0x0}, > + {0x9007a, 0x0}, > + {0x9007b, 0x0}, > + {0x9007c, 0x0}, > + {0x9007d, 0x0}, > + {0x9007e, 0x0}, > + {0x9007f, 0x0}, > + {0x90080, 0x0}, > + {0x90081, 0x0}, > + {0x90082, 0x0}, > + {0x90083, 0x0}, > + {0x90084, 0x0}, > + {0x90085, 0x0}, > + {0x90086, 0x0}, > + {0x90087, 0x0}, > + {0x90088, 0x0}, > + {0x90089, 0x0}, > + {0x9008a, 0x0}, > + {0x9008b, 0x0}, > + {0x9008c, 0x0}, > + {0x9008d, 0x0}, > + {0x9008e, 0x0}, > + {0x9008f, 0x0}, > + {0x90090, 0x0}, > + {0x90091, 0x0}, > + {0x90092, 0x0}, > + {0x90093, 0x0}, > + {0x90094, 0x0}, > + {0x90095, 0x0}, > + {0x90096, 0x0}, > + {0x90097, 0x0}, > + {0x90098, 0x0}, > + {0x90099, 0x0}, > + {0x9009a, 0x0}, > + {0x9009b, 0x0}, > + {0x9009c, 0x0}, > + {0x9009d, 0x0}, > + {0x9009e, 0x0}, > + {0x9009f, 0x0}, > + {0x900a0, 0x0}, > + {0x900a1, 0x0}, > + {0x900a2, 0x0}, > + {0x900a3, 0x0}, > + {0x900a4, 0x0}, > + {0x900a5, 0x0}, > + {0x900a6, 0x0}, > + {0x900a7, 0x0}, > + {0x900a8, 0x0}, > + {0x900a9, 0x0}, > + {0x40000, 0x0}, > + {0x40020, 0x0}, > + {0x40040, 0x0}, > + {0x40060, 0x0}, > + {0x40001, 0x0}, > + {0x40021, 0x0}, > + {0x40041, 0x0}, > + {0x40061, 0x0}, > + {0x40002, 0x0}, > + {0x40022, 0x0}, > + {0x40042, 0x0}, > + {0x40062, 0x0}, > + {0x40003, 0x0}, > + {0x40023, 0x0}, > + {0x40043, 0x0}, > + {0x40063, 0x0}, > + {0x40004, 0x0}, > + {0x40024, 0x0}, > + {0x40044, 0x0}, > + {0x40064, 0x0}, > + {0x40005, 0x0}, > + {0x40025, 0x0}, > + {0x40045, 0x0}, > + {0x40065, 0x0}, > + {0x40006, 0x0}, > + {0x40026, 0x0}, > + {0x40046, 0x0}, > + {0x40066, 0x0}, > + {0x40007, 0x0}, > + {0x40027, 0x0}, > + {0x40047, 0x0}, > + {0x40067, 0x0}, > + {0x40008, 0x0}, > + {0x40028, 0x0}, > + {0x40048, 0x0}, > + {0x40068, 0x0}, > + {0x40009, 0x0}, > + {0x40029, 0x0}, > + {0x40049, 0x0}, > + {0x40069, 0x0}, > + {0x4000a, 0x0}, > + {0x4002a, 0x0}, > + {0x4004a, 0x0}, > + {0x4006a, 0x0}, > + {0x4000b, 0x0}, > + {0x4002b, 0x0}, > + {0x4004b, 0x0}, > + {0x4006b, 0x0}, > + {0x4000c, 0x0}, > + {0x4002c, 0x0}, > + {0x4004c, 0x0}, > + {0x4006c, 0x0}, > + {0x4000d, 0x0}, > + {0x4002d, 0x0}, > + {0x4004d, 0x0}, > + {0x4006d, 0x0}, > + {0x4000e, 0x0}, > + {0x4002e, 0x0}, > + {0x4004e, 0x0}, > + {0x4006e, 0x0}, > + {0x4000f, 0x0}, > + {0x4002f, 0x0}, > + {0x4004f, 0x0}, > + {0x4006f, 0x0}, > + {0x40010, 0x0}, > + {0x40030, 0x0}, > + {0x40050, 0x0}, > + {0x40070, 0x0}, > + {0x40011, 0x0}, > + {0x40031, 0x0}, > + {0x40051, 0x0}, > + {0x40071, 0x0}, > + {0x40012, 0x0}, > + {0x40032, 0x0}, > + {0x40052, 0x0}, > + {0x40072, 0x0}, > + {0x40013, 0x0}, > + {0x40033, 0x0}, > + {0x40053, 0x0}, > + {0x40073, 0x0}, > + {0x40014, 0x0}, > + {0x40034, 0x0}, > + {0x40054, 0x0}, > + {0x40074, 0x0}, > + {0x40015, 0x0}, > + {0x40035, 0x0}, > + {0x40055, 0x0}, > + {0x40075, 0x0}, > + {0x40016, 0x0}, > + {0x40036, 0x0}, > + {0x40056, 0x0}, > + {0x40076, 0x0}, > + {0x40017, 0x0}, > + {0x40037, 0x0}, > + {0x40057, 0x0}, > + {0x40077, 0x0}, > + {0x40018, 0x0}, > + {0x40038, 0x0}, > + {0x40058, 0x0}, > + {0x40078, 0x0}, > + {0x40019, 0x0}, > + {0x40039, 0x0}, > + {0x40059, 0x0}, > + {0x40079, 0x0}, > + {0x4001a, 0x0}, > + {0x4003a, 0x0}, > + {0x4005a, 0x0}, > + {0x4007a, 0x0}, > + {0x900aa, 0x0}, > + {0x900ab, 0x0}, > + {0x900ac, 0x0}, > + {0x900ad, 0x0}, > + {0x900ae, 0x0}, > + {0x900af, 0x0}, > + {0x900b0, 0x0}, > + {0x900b1, 0x0}, > + {0x900b2, 0x0}, > + {0x900b3, 0x0}, > + {0x900b4, 0x0}, > + {0x900b5, 0x0}, > + {0x900b6, 0x0}, > + {0x900b7, 0x0}, > + {0x900b8, 0x0}, > + {0x900b9, 0x0}, > + {0x900ba, 0x0}, > + {0x900bb, 0x0}, > + {0x900bc, 0x0}, > + {0x900bd, 0x0}, > + {0x900be, 0x0}, > + {0x900bf, 0x0}, > + {0x900c0, 0x0}, > + {0x900c1, 0x0}, > + {0x900c2, 0x0}, > + {0x900c3, 0x0}, > + {0x900c4, 0x0}, > + {0x900c5, 0x0}, > + {0x900c6, 0x0}, > + {0x900c7, 0x0}, > + {0x900c8, 0x0}, > + {0x900c9, 0x0}, > + {0x900ca, 0x0}, > + {0x900cb, 0x0}, > + {0x900cc, 0x0}, > + {0x900cd, 0x0}, > + {0x900ce, 0x0}, > + {0x900cf, 0x0}, > + {0x900d0, 0x0}, > + {0x900d1, 0x0}, > + {0x900d2, 0x0}, > + {0x900d3, 0x0}, > + {0x900d4, 0x0}, > + {0x900d5, 0x0}, > + {0x900d6, 0x0}, > + {0x900d7, 0x0}, > + {0x900d8, 0x0}, > + {0x900d9, 0x0}, > + {0x900da, 0x0}, > + {0x900db, 0x0}, > + {0x900dc, 0x0}, > + {0x900dd, 0x0}, > + {0x900de, 0x0}, > + {0x900df, 0x0}, > + {0x900e0, 0x0}, > + {0x900e1, 0x0}, > + {0x900e2, 0x0}, > + {0x900e3, 0x0}, > + {0x900e4, 0x0}, > + {0x900e5, 0x0}, > + {0x900e6, 0x0}, > + {0x900e7, 0x0}, > + {0x900e8, 0x0}, > + {0x900e9, 0x0}, > + {0x900ea, 0x0}, > + {0x900eb, 0x0}, > + {0x900ec, 0x0}, > + {0x900ed, 0x0}, > + {0x900ee, 0x0}, > + {0x900ef, 0x0}, > + {0x900f0, 0x0}, > + {0x900f1, 0x0}, > + {0x900f2, 0x0}, > + {0x900f3, 0x0}, > + {0x900f4, 0x0}, > + {0x900f5, 0x0}, > + {0x900f6, 0x0}, > + {0x900f7, 0x0}, > + {0x900f8, 0x0}, > + {0x900f9, 0x0}, > + {0x900fa, 0x0}, > + {0x900fb, 0x0}, > + {0x900fc, 0x0}, > + {0x900fd, 0x0}, > + {0x900fe, 0x0}, > + {0x900ff, 0x0}, > + {0x90100, 0x0}, > + {0x90101, 0x0}, > + {0x90102, 0x0}, > + {0x90103, 0x0}, > + {0x90104, 0x0}, > + {0x90105, 0x0}, > + {0x90106, 0x0}, > + {0x90107, 0x0}, > + {0x90108, 0x0}, > + {0x90109, 0x0}, > + {0x9010a, 0x0}, > + {0x9010b, 0x0}, > + {0x9010c, 0x0}, > + {0x9010d, 0x0}, > + {0x9010e, 0x0}, > + {0x9010f, 0x0}, > + {0x90110, 0x0}, > + {0x90111, 0x0}, > + {0x90112, 0x0}, > + {0x90113, 0x0}, > + {0x90114, 0x0}, > + {0x90115, 0x0}, > + {0x90116, 0x0}, > + {0x90117, 0x0}, > + {0x90118, 0x0}, > + {0x90119, 0x0}, > + {0x9011a, 0x0}, > + {0x9011b, 0x0}, > + {0x9011c, 0x0}, > + {0x9011d, 0x0}, > + {0x9011e, 0x0}, > + {0x9011f, 0x0}, > + {0x90120, 0x0}, > + {0x90121, 0x0}, > + {0x90122, 0x0}, > + {0x90123, 0x0}, > + {0x90124, 0x0}, > + {0x90125, 0x0}, > + {0x90126, 0x0}, > + {0x90127, 0x0}, > + {0x90128, 0x0}, > + {0x90129, 0x0}, > + {0x9012a, 0x0}, > + {0x9012b, 0x0}, > + {0x9012c, 0x0}, > + {0x9012d, 0x0}, > + {0x9012e, 0x0}, > + {0x9012f, 0x0}, > + {0x90130, 0x0}, > + {0x90131, 0x0}, > + {0x90132, 0x0}, > + {0x90133, 0x0}, > + {0x90134, 0x0}, > + {0x90135, 0x0}, > + {0x90136, 0x0}, > + {0x90137, 0x0}, > + {0x90138, 0x0}, > + {0x90139, 0x0}, > + {0x9013a, 0x0}, > + {0x9013b, 0x0}, > + {0x9013c, 0x0}, > + {0x9013d, 0x0}, > + {0x9013e, 0x0}, > + {0x9013f, 0x0}, > + {0x90140, 0x0}, > + {0x90141, 0x0}, > + {0x90142, 0x0}, > + {0x90143, 0x0}, > + {0x90144, 0x0}, > + {0x90145, 0x0}, > + {0x90146, 0x0}, > + {0x90147, 0x0}, > + {0x90148, 0x0}, > + {0x90149, 0x0}, > + {0x9014a, 0x0}, > + {0x9014b, 0x0}, > + {0x9014c, 0x0}, > + {0x9014d, 0x0}, > + {0x9014e, 0x0}, > + {0x9014f, 0x0}, > + {0x90150, 0x0}, > + {0x90151, 0x0}, > + {0x90152, 0x0}, > + {0x90153, 0x0}, > + {0x90154, 0x0}, > + {0x90155, 0x0}, > + {0x90156, 0x0}, > + {0x90157, 0x0}, > + {0x90158, 0x0}, > + {0x90159, 0x0}, > + {0x9015a, 0x0}, > + {0x9015b, 0x0}, > + {0x9015c, 0x0}, > + {0x9015d, 0x0}, > + {0x9015e, 0x0}, > + {0x9015f, 0x0}, > + {0x90160, 0x0}, > + {0x90161, 0x0}, > + {0x90162, 0x0}, > + {0x90163, 0x0}, > + {0x90164, 0x0}, > + {0x90165, 0x0}, > + {0x90166, 0x0}, > + {0x90167, 0x0}, > + {0x90168, 0x0}, > + {0x90169, 0x0}, > + {0x9016a, 0x0}, > + {0x9016b, 0x0}, > + {0x9016c, 0x0}, > + {0x9016d, 0x0}, > + {0x9016e, 0x0}, > + {0x9016f, 0x0}, > + {0x90170, 0x0}, > + {0x90171, 0x0}, > + {0x90172, 0x0}, > + {0x90173, 0x0}, > + {0x90174, 0x0}, > + {0x90175, 0x0}, > + {0x90176, 0x0}, > + {0x90177, 0x0}, > + {0x90178, 0x0}, > + {0x90179, 0x0}, > + {0x9017a, 0x0}, > + {0x9017b, 0x0}, > + {0x9017c, 0x0}, > + {0x9017d, 0x0}, > + {0x9017e, 0x0}, > + {0x9017f, 0x0}, > + {0x90180, 0x0}, > + {0x90181, 0x0}, > + {0x90182, 0x0}, > + {0x90183, 0x0}, > + {0x90184, 0x0}, > + {0x90006, 0x0}, > + {0x90007, 0x0}, > + {0x90008, 0x0}, > + {0x90009, 0x0}, > + {0x9000a, 0x0}, > + {0x9000b, 0x0}, > + {0xd00e7, 0x0}, > + {0x90017, 0x0}, > + {0x9001f, 0x0}, > + {0x90026, 0x0}, > + {0x400d0, 0x0}, > + {0x400d1, 0x0}, > + {0x400d2, 0x0}, > + {0x400d3, 0x0}, > + {0x400d4, 0x0}, > + {0x400d5, 0x0}, > + {0x400d6, 0x0}, > + {0x400d7, 0x0}, > + {0x200be, 0x0}, > + {0x2000b, 0x0}, > + {0x2000c, 0x0}, > + {0x2000d, 0x0}, > + {0x2000e, 0x0}, > + {0x9000c, 0x0}, > + {0x9000d, 0x0}, > + {0x9000e, 0x0}, > + {0x9000f, 0x0}, > + {0x90010, 0x0}, > + {0x90011, 0x0}, > + {0x90012, 0x0}, > + {0x90013, 0x0}, > + {0x20010, 0x0}, > + {0x20011, 0x0}, > + {0x40080, 0x0}, > + {0x40081, 0x0}, > + {0x40082, 0x0}, > + {0x40083, 0x0}, > + {0x40084, 0x0}, > + {0x40085, 0x0}, > + {0x400fd, 0x0}, > + {0x400f1, 0x0}, > + {0x10011, 0x0}, > + {0x10012, 0x0}, > + {0x10013, 0x0}, > + {0x10018, 0x0}, > + {0x10002, 0x0}, > + {0x100b2, 0x0}, > + {0x101b4, 0x0}, > + {0x102b4, 0x0}, > + {0x103b4, 0x0}, > + {0x104b4, 0x0}, > + {0x105b4, 0x0}, > + {0x106b4, 0x0}, > + {0x107b4, 0x0}, > + {0x108b4, 0x0}, > + {0x11011, 0x0}, > + {0x11012, 0x0}, > + {0x11013, 0x0}, > + {0x11018, 0x0}, > + {0x11002, 0x0}, > + {0x110b2, 0x0}, > + {0x111b4, 0x0}, > + {0x112b4, 0x0}, > + {0x113b4, 0x0}, > + {0x114b4, 0x0}, > + {0x115b4, 0x0}, > + {0x116b4, 0x0}, > + {0x117b4, 0x0}, > + {0x118b4, 0x0}, > + {0x20089, 0x0}, > + {0xc0080, 0x0}, > + {0x200cb, 0x0}, > + {0x10068, 0x0}, > + {0x10069, 0x0}, > + {0x10168, 0x0}, > + {0x10169, 0x0}, > + {0x10268, 0x0}, > + {0x10269, 0x0}, > + {0x10368, 0x0}, > + {0x10369, 0x0}, > + {0x10468, 0x0}, > + {0x10469, 0x0}, > + {0x10568, 0x0}, > + {0x10569, 0x0}, > + {0x10668, 0x0}, > + {0x10669, 0x0}, > + {0x10768, 0x0}, > + {0x10769, 0x0}, > + {0x10868, 0x0}, > + {0x10869, 0x0}, > + {0x100aa, 0x0}, > + {0x10062, 0x0}, > + {0x10001, 0x0}, > + {0x100a0, 0x0}, > + {0x100a1, 0x0}, > + {0x100a2, 0x0}, > + {0x100a3, 0x0}, > + {0x100a4, 0x0}, > + {0x100a5, 0x0}, > + {0x100a6, 0x0}, > + {0x100a7, 0x0}, > + {0x11068, 0x0}, > + {0x11069, 0x0}, > + {0x11168, 0x0}, > + {0x11169, 0x0}, > + {0x11268, 0x0}, > + {0x11269, 0x0}, > + {0x11368, 0x0}, > + {0x11369, 0x0}, > + {0x11468, 0x0}, > + {0x11469, 0x0}, > + {0x11568, 0x0}, > + {0x11569, 0x0}, > + {0x11668, 0x0}, > + {0x11669, 0x0}, > + {0x11768, 0x0}, > + {0x11769, 0x0}, > + {0x11868, 0x0}, > + {0x11869, 0x0}, > + {0x110aa, 0x0}, > + {0x11062, 0x0}, > + {0x11001, 0x0}, > + {0x110a0, 0x0}, > + {0x110a1, 0x0}, > + {0x110a2, 0x0}, > + {0x110a3, 0x0}, > + {0x110a4, 0x0}, > + {0x110a5, 0x0}, > + {0x110a6, 0x0}, > + {0x110a7, 0x0}, > + {0x80, 0x0}, > + {0x1080, 0x0}, > + {0x2080, 0x0}, > + {0x10020, 0x0}, > + {0x10080, 0x0}, > + {0x10081, 0x0}, > + {0x100d0, 0x0}, > + {0x100d1, 0x0}, > + {0x1008c, 0x0}, > + {0x1008d, 0x0}, > + {0x10180, 0x0}, > + {0x10181, 0x0}, > + {0x101d0, 0x0}, > + {0x101d1, 0x0}, > + {0x1018c, 0x0}, > + {0x1018d, 0x0}, > + {0x100c0, 0x0}, > + {0x100c1, 0x0}, > + {0x101c0, 0x0}, > + {0x101c1, 0x0}, > + {0x102c0, 0x0}, > + {0x102c1, 0x0}, > + {0x103c0, 0x0}, > + {0x103c1, 0x0}, > + {0x104c0, 0x0}, > + {0x104c1, 0x0}, > + {0x105c0, 0x0}, > + {0x105c1, 0x0}, > + {0x106c0, 0x0}, > + {0x106c1, 0x0}, > + {0x107c0, 0x0}, > + {0x107c1, 0x0}, > + {0x108c0, 0x0}, > + {0x108c1, 0x0}, > + {0x100ae, 0x0}, > + {0x100af, 0x0}, > + {0x11020, 0x0}, > + {0x11080, 0x0}, > + {0x11081, 0x0}, > + {0x110d0, 0x0}, > + {0x110d1, 0x0}, > + {0x1108c, 0x0}, > + {0x1108d, 0x0}, > + {0x11180, 0x0}, > + {0x11181, 0x0}, > + {0x111d0, 0x0}, > + {0x111d1, 0x0}, > + {0x1118c, 0x0}, > + {0x1118d, 0x0}, > + {0x110c0, 0x0}, > + {0x110c1, 0x0}, > + {0x111c0, 0x0}, > + {0x111c1, 0x0}, > + {0x112c0, 0x0}, > + {0x112c1, 0x0}, > + {0x113c0, 0x0}, > + {0x113c1, 0x0}, > + {0x114c0, 0x0}, > + {0x114c1, 0x0}, > + {0x115c0, 0x0}, > + {0x115c1, 0x0}, > + {0x116c0, 0x0}, > + {0x116c1, 0x0}, > + {0x117c0, 0x0}, > + {0x117c1, 0x0}, > + {0x118c0, 0x0}, > + {0x118c1, 0x0}, > + {0x110ae, 0x0}, > + {0x110af, 0x0}, > + {0x90201, 0x0}, > + {0x90202, 0x0}, > + {0x90203, 0x0}, > + {0x90205, 0x0}, > + {0x90206, 0x0}, > + {0x90207, 0x0}, > + {0x90208, 0x0}, > + {0x20020, 0x0}, > + {0x20077, 0x0}, > + {0x20072, 0x0}, > + {0x20073, 0x0}, > + {0x400c0, 0x0}, > + {0x10040, 0x0}, > + {0x10140, 0x0}, > + {0x10240, 0x0}, > + {0x10340, 0x0}, > + {0x10440, 0x0}, > + {0x10540, 0x0}, > + {0x10640, 0x0}, > + {0x10740, 0x0}, > + {0x10840, 0x0}, > + {0x11040, 0x0}, > + {0x11140, 0x0}, > + {0x11240, 0x0}, > + {0x11340, 0x0}, > + {0x11440, 0x0}, > + {0x11540, 0x0}, > + {0x11640, 0x0}, > + {0x11740, 0x0}, > + {0x11840, 0x0}, > + > +}; > + > +/* P0 message block parameter for training firmware */ > +static struct dram_cfg_param ddr_fsp0_cfg[] = { > + {0xd0000, 0x0}, > + {0x54003, 0xe94}, > + {0x54004, 0x4}, > + {0x54006, 0x15}, > + {0x54008, 0x131f}, > + {0x54009, 0xc8}, > + {0x5400b, 0x4}, > + {0x5400d, 0x100}, > + {0x5400f, 0x100}, > + {0x54012, 0x110}, > + {0x54019, 0x36e4}, > + {0x5401a, 0xf2}, > + {0x5401b, 0x1146}, > + {0x5401c, 0x1108}, > + {0x5401e, 0x4}, > + {0x5401f, 0x36e4}, > + {0x54020, 0xf2}, > + {0x54021, 0x1146}, > + {0x54022, 0x1108}, > + {0x54024, 0x4}, > + {0x54032, 0xe400}, > + {0x54033, 0xf236}, > + {0x54034, 0x4600}, > + {0x54035, 0x811}, > + {0x54036, 0x11}, > + {0x54037, 0x400}, > + {0x54038, 0xe400}, > + {0x54039, 0xf236}, > + {0x5403a, 0x4600}, > + {0x5403b, 0x811}, > + {0x5403c, 0x11}, > + {0x5403d, 0x400}, > + {0xd0000, 0x1} > +}; > + > +/* P0 2D message block parameter for training firmware */ > +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = { > + {0xd0000, 0x0}, > + {0x54003, 0xe94}, > + {0x54004, 0x4}, > + {0x54006, 0x15}, > + {0x54008, 0x61}, > + {0x54009, 0xc8}, > + {0x5400b, 0x4}, > + {0x5400d, 0x100}, > + {0x5400f, 0x100}, > + {0x54010, 0x2080}, > + {0x54012, 0x110}, > + {0x54019, 0x36e4}, > + {0x5401a, 0xf2}, > + {0x5401b, 0x1146}, > + {0x5401c, 0x1108}, > + {0x5401e, 0x4}, > + {0x5401f, 0x36e4}, > + {0x54020, 0xf2}, > + {0x54021, 0x1146}, > + {0x54022, 0x1108}, > + {0x54024, 0x4}, > + {0x54032, 0xe400}, > + {0x54033, 0xf236}, > + {0x54034, 0x4600}, > + {0x54035, 0x811}, > + {0x54036, 0x11}, > + {0x54037, 0x400}, > + {0x54038, 0xe400}, > + {0x54039, 0xf236}, > + {0x5403a, 0x4600}, > + {0x5403b, 0x811}, > + {0x5403c, 0x11}, > + {0x5403d, 0x400}, > + {0xd0000, 0x1} > +}; > + > +/* DRAM PHY init engine image */ > +static struct dram_cfg_param ddr_phy_pie[] = { > + {0xd0000, 0x0}, > + {0x90000, 0x10}, > + {0x90001, 0x400}, > + {0x90002, 0x10e}, > + {0x90003, 0x0}, > + {0x90004, 0x0}, > + {0x90005, 0x8}, > + {0x90029, 0xb}, > + {0x9002a, 0x480}, > + {0x9002b, 0x109}, > + {0x9002c, 0x8}, > + {0x9002d, 0x448}, > + {0x9002e, 0x139}, > + {0x9002f, 0x8}, > + {0x90030, 0x478}, > + {0x90031, 0x109}, > + {0x90032, 0x0}, > + {0x90033, 0xe8}, > + {0x90034, 0x109}, > + {0x90035, 0x2}, > + {0x90036, 0x10}, > + {0x90037, 0x139}, > + {0x90038, 0xb}, > + {0x90039, 0x7c0}, > + {0x9003a, 0x139}, > + {0x9003b, 0x44}, > + {0x9003c, 0x633}, > + {0x9003d, 0x159}, > + {0x9003e, 0x14f}, > + {0x9003f, 0x630}, > + {0x90040, 0x159}, > + {0x90041, 0x47}, > + {0x90042, 0x633}, > + {0x90043, 0x149}, > + {0x90044, 0x4f}, > + {0x90045, 0x633}, > + {0x90046, 0x179}, > + {0x90047, 0x8}, > + {0x90048, 0xe0}, > + {0x90049, 0x109}, > + {0x9004a, 0x0}, > + {0x9004b, 0x7c8}, > + {0x9004c, 0x109}, > + {0x9004d, 0x0}, > + {0x9004e, 0x1}, > + {0x9004f, 0x8}, > + {0x90050, 0x30}, > + {0x90051, 0x65a}, > + {0x90052, 0x9}, > + {0x90053, 0x0}, > + {0x90054, 0x45a}, > + {0x90055, 0x9}, > + {0x90056, 0x0}, > + {0x90057, 0x448}, > + {0x90058, 0x109}, > + {0x90059, 0x40}, > + {0x9005a, 0x633}, > + {0x9005b, 0x179}, > + {0x9005c, 0x1}, > + {0x9005d, 0x618}, > + {0x9005e, 0x109}, > + {0x9005f, 0x40c0}, > + {0x90060, 0x633}, > + {0x90061, 0x149}, > + {0x90062, 0x8}, > + {0x90063, 0x4}, > + {0x90064, 0x48}, > + {0x90065, 0x4040}, > + {0x90066, 0x633}, > + {0x90067, 0x149}, > + {0x90068, 0x0}, > + {0x90069, 0x4}, > + {0x9006a, 0x48}, > + {0x9006b, 0x40}, > + {0x9006c, 0x633}, > + {0x9006d, 0x149}, > + {0x9006e, 0x0}, > + {0x9006f, 0x658}, > + {0x90070, 0x109}, > + {0x90071, 0x10}, > + {0x90072, 0x4}, > + {0x90073, 0x18}, > + {0x90074, 0x0}, > + {0x90075, 0x4}, > + {0x90076, 0x78}, > + {0x90077, 0x549}, > + {0x90078, 0x633}, > + {0x90079, 0x159}, > + {0x9007a, 0xd49}, > + {0x9007b, 0x633}, > + {0x9007c, 0x159}, > + {0x9007d, 0x94a}, > + {0x9007e, 0x633}, > + {0x9007f, 0x159}, > + {0x90080, 0x441}, > + {0x90081, 0x633}, > + {0x90082, 0x149}, > + {0x90083, 0x42}, > + {0x90084, 0x633}, > + {0x90085, 0x149}, > + {0x90086, 0x1}, > + {0x90087, 0x633}, > + {0x90088, 0x149}, > + {0x90089, 0x0}, > + {0x9008a, 0xe0}, > + {0x9008b, 0x109}, > + {0x9008c, 0xa}, > + {0x9008d, 0x10}, > + {0x9008e, 0x109}, > + {0x9008f, 0x9}, > + {0x90090, 0x3c0}, > + {0x90091, 0x149}, > + {0x90092, 0x9}, > + {0x90093, 0x3c0}, > + {0x90094, 0x159}, > + {0x90095, 0x18}, > + {0x90096, 0x10}, > + {0x90097, 0x109}, > + {0x90098, 0x0}, > + {0x90099, 0x3c0}, > + {0x9009a, 0x109}, > + {0x9009b, 0x18}, > + {0x9009c, 0x4}, > + {0x9009d, 0x48}, > + {0x9009e, 0x18}, > + {0x9009f, 0x4}, > + {0x900a0, 0x58}, > + {0x900a1, 0xb}, > + {0x900a2, 0x10}, > + {0x900a3, 0x109}, > + {0x900a4, 0x1}, > + {0x900a5, 0x10}, > + {0x900a6, 0x109}, > + {0x900a7, 0x5}, > + {0x900a8, 0x7c0}, > + {0x900a9, 0x109}, > + {0x40000, 0x811}, > + {0x40020, 0x880}, > + {0x40040, 0x0}, > + {0x40060, 0x0}, > + {0x40001, 0x4008}, > + {0x40021, 0x83}, > + {0x40041, 0x4f}, > + {0x40061, 0x0}, > + {0x40002, 0x4040}, > + {0x40022, 0x83}, > + {0x40042, 0x51}, > + {0x40062, 0x0}, > + {0x40003, 0x811}, > + {0x40023, 0x880}, > + {0x40043, 0x0}, > + {0x40063, 0x0}, > + {0x40004, 0x720}, > + {0x40024, 0xf}, > + {0x40044, 0x1740}, > + {0x40064, 0x0}, > + {0x40005, 0x16}, > + {0x40025, 0x83}, > + {0x40045, 0x4b}, > + {0x40065, 0x0}, > + {0x40006, 0x716}, > + {0x40026, 0xf}, > + {0x40046, 0x2001}, > + {0x40066, 0x0}, > + {0x40007, 0x716}, > + {0x40027, 0xf}, > + {0x40047, 0x2800}, > + {0x40067, 0x0}, > + {0x40008, 0x716}, > + {0x40028, 0xf}, > + {0x40048, 0xf00}, > + {0x40068, 0x0}, > + {0x40009, 0x720}, > + {0x40029, 0xf}, > + {0x40049, 0x1400}, > + {0x40069, 0x0}, > + {0x4000a, 0xe08}, > + {0x4002a, 0xc15}, > + {0x4004a, 0x0}, > + {0x4006a, 0x0}, > + {0x4000b, 0x625}, > + {0x4002b, 0x15}, > + {0x4004b, 0x0}, > + {0x4006b, 0x0}, > + {0x4000c, 0x4028}, > + {0x4002c, 0x80}, > + {0x4004c, 0x0}, > + {0x4006c, 0x0}, > + {0x4000d, 0xe08}, > + {0x4002d, 0xc1a}, > + {0x4004d, 0x0}, > + {0x4006d, 0x0}, > + {0x4000e, 0x625}, > + {0x4002e, 0x1a}, > + {0x4004e, 0x0}, > + {0x4006e, 0x0}, > + {0x4000f, 0x4040}, > + {0x4002f, 0x80}, > + {0x4004f, 0x0}, > + {0x4006f, 0x0}, > + {0x40010, 0x2604}, > + {0x40030, 0x15}, > + {0x40050, 0x0}, > + {0x40070, 0x0}, > + {0x40011, 0x708}, > + {0x40031, 0x5}, > + {0x40051, 0x0}, > + {0x40071, 0x2002}, > + {0x40012, 0x8}, > + {0x40032, 0x80}, > + {0x40052, 0x0}, > + {0x40072, 0x0}, > + {0x40013, 0x2604}, > + {0x40033, 0x1a}, > + {0x40053, 0x0}, > + {0x40073, 0x0}, > + {0x40014, 0x708}, > + {0x40034, 0xa}, > + {0x40054, 0x0}, > + {0x40074, 0x2002}, > + {0x40015, 0x4040}, > + {0x40035, 0x80}, > + {0x40055, 0x0}, > + {0x40075, 0x0}, > + {0x40016, 0x60a}, > + {0x40036, 0x15}, > + {0x40056, 0x1200}, > + {0x40076, 0x0}, > + {0x40017, 0x61a}, > + {0x40037, 0x15}, > + {0x40057, 0x1300}, > + {0x40077, 0x0}, > + {0x40018, 0x60a}, > + {0x40038, 0x1a}, > + {0x40058, 0x1200}, > + {0x40078, 0x0}, > + {0x40019, 0x642}, > + {0x40039, 0x1a}, > + {0x40059, 0x1300}, > + {0x40079, 0x0}, > + {0x4001a, 0x4808}, > + {0x4003a, 0x880}, > + {0x4005a, 0x0}, > + {0x4007a, 0x0}, > + {0x900aa, 0x0}, > + {0x900ab, 0x790}, > + {0x900ac, 0x11a}, > + {0x900ad, 0x8}, > + {0x900ae, 0x7aa}, > + {0x900af, 0x2a}, > + {0x900b0, 0x10}, > + {0x900b1, 0x7b2}, > + {0x900b2, 0x2a}, > + {0x900b3, 0x0}, > + {0x900b4, 0x7c8}, > + {0x900b5, 0x109}, > + {0x900b6, 0x10}, > + {0x900b7, 0x10}, > + {0x900b8, 0x109}, > + {0x900b9, 0x10}, > + {0x900ba, 0x2a8}, > + {0x900bb, 0x129}, > + {0x900bc, 0x8}, > + {0x900bd, 0x370}, > + {0x900be, 0x129}, > + {0x900bf, 0xa}, > + {0x900c0, 0x3c8}, > + {0x900c1, 0x1a9}, > + {0x900c2, 0xc}, > + {0x900c3, 0x408}, > + {0x900c4, 0x199}, > + {0x900c5, 0x14}, > + {0x900c6, 0x790}, > + {0x900c7, 0x11a}, > + {0x900c8, 0x8}, > + {0x900c9, 0x4}, > + {0x900ca, 0x18}, > + {0x900cb, 0xe}, > + {0x900cc, 0x408}, > + {0x900cd, 0x199}, > + {0x900ce, 0x8}, > + {0x900cf, 0x8568}, > + {0x900d0, 0x108}, > + {0x900d1, 0x18}, > + {0x900d2, 0x790}, > + {0x900d3, 0x16a}, > + {0x900d4, 0x8}, > + {0x900d5, 0x1d8}, > + {0x900d6, 0x169}, > + {0x900d7, 0x10}, > + {0x900d8, 0x8558}, > + {0x900d9, 0x168}, > + {0x900da, 0x1ff8}, > + {0x900db, 0x85a8}, > + {0x900dc, 0x1e8}, > + {0x900dd, 0x50}, > + {0x900de, 0x798}, > + {0x900df, 0x16a}, > + {0x900e0, 0x60}, > + {0x900e1, 0x7a0}, > + {0x900e2, 0x16a}, > + {0x900e3, 0x8}, > + {0x900e4, 0x8310}, > + {0x900e5, 0x168}, > + {0x900e6, 0x8}, > + {0x900e7, 0xa310}, > + {0x900e8, 0x168}, > + {0x900e9, 0xa}, > + {0x900ea, 0x408}, > + {0x900eb, 0x169}, > + {0x900ec, 0x6e}, > + {0x900ed, 0x0}, > + {0x900ee, 0x68}, > + {0x900ef, 0x0}, > + {0x900f0, 0x408}, > + {0x900f1, 0x169}, > + {0x900f2, 0x0}, > + {0x900f3, 0x8310}, > + {0x900f4, 0x168}, > + {0x900f5, 0x0}, > + {0x900f6, 0xa310}, > + {0x900f7, 0x168}, > + {0x900f8, 0x1ff8}, > + {0x900f9, 0x85a8}, > + {0x900fa, 0x1e8}, > + {0x900fb, 0x68}, > + {0x900fc, 0x798}, > + {0x900fd, 0x16a}, > + {0x900fe, 0x78}, > + {0x900ff, 0x7a0}, > + {0x90100, 0x16a}, > + {0x90101, 0x68}, > + {0x90102, 0x790}, > + {0x90103, 0x16a}, > + {0x90104, 0x8}, > + {0x90105, 0x8b10}, > + {0x90106, 0x168}, > + {0x90107, 0x8}, > + {0x90108, 0xab10}, > + {0x90109, 0x168}, > + {0x9010a, 0xa}, > + {0x9010b, 0x408}, > + {0x9010c, 0x169}, > + {0x9010d, 0x58}, > + {0x9010e, 0x0}, > + {0x9010f, 0x68}, > + {0x90110, 0x0}, > + {0x90111, 0x408}, > + {0x90112, 0x169}, > + {0x90113, 0x0}, > + {0x90114, 0x8b10}, > + {0x90115, 0x168}, > + {0x90116, 0x1}, > + {0x90117, 0xab10}, > + {0x90118, 0x168}, > + {0x90119, 0x0}, > + {0x9011a, 0x1d8}, > + {0x9011b, 0x169}, > + {0x9011c, 0x80}, > + {0x9011d, 0x790}, > + {0x9011e, 0x16a}, > + {0x9011f, 0x18}, > + {0x90120, 0x7aa}, > + {0x90121, 0x6a}, > + {0x90122, 0xa}, > + {0x90123, 0x0}, > + {0x90124, 0x1e9}, > + {0x90125, 0x8}, > + {0x90126, 0x8080}, > + {0x90127, 0x108}, > + {0x90128, 0xf}, > + {0x90129, 0x408}, > + {0x9012a, 0x169}, > + {0x9012b, 0xc}, > + {0x9012c, 0x0}, > + {0x9012d, 0x68}, > + {0x9012e, 0x9}, > + {0x9012f, 0x0}, > + {0x90130, 0x1a9}, > + {0x90131, 0x0}, > + {0x90132, 0x408}, > + {0x90133, 0x169}, > + {0x90134, 0x0}, > + {0x90135, 0x8080}, > + {0x90136, 0x108}, > + {0x90137, 0x8}, > + {0x90138, 0x7aa}, > + {0x90139, 0x6a}, > + {0x9013a, 0x0}, > + {0x9013b, 0x8568}, > + {0x9013c, 0x108}, > + {0x9013d, 0xb7}, > + {0x9013e, 0x790}, > + {0x9013f, 0x16a}, > + {0x90140, 0x1f}, > + {0x90141, 0x0}, > + {0x90142, 0x68}, > + {0x90143, 0x8}, > + {0x90144, 0x8558}, > + {0x90145, 0x168}, > + {0x90146, 0xf}, > + {0x90147, 0x408}, > + {0x90148, 0x169}, > + {0x90149, 0xd}, > + {0x9014a, 0x0}, > + {0x9014b, 0x68}, > + {0x9014c, 0x0}, > + {0x9014d, 0x408}, > + {0x9014e, 0x169}, > + {0x9014f, 0x0}, > + {0x90150, 0x8558}, > + {0x90151, 0x168}, > + {0x90152, 0x8}, > + {0x90153, 0x3c8}, > + {0x90154, 0x1a9}, > + {0x90155, 0x3}, > + {0x90156, 0x370}, > + {0x90157, 0x129}, > + {0x90158, 0x20}, > + {0x90159, 0x2aa}, > + {0x9015a, 0x9}, > + {0x9015b, 0x8}, > + {0x9015c, 0xe8}, > + {0x9015d, 0x109}, > + {0x9015e, 0x0}, > + {0x9015f, 0x8140}, > + {0x90160, 0x10c}, > + {0x90161, 0x10}, > + {0x90162, 0x8138}, > + {0x90163, 0x104}, > + {0x90164, 0x8}, > + {0x90165, 0x448}, > + {0x90166, 0x109}, > + {0x90167, 0xf}, > + {0x90168, 0x7c0}, > + {0x90169, 0x109}, > + {0x9016a, 0x0}, > + {0x9016b, 0xe8}, > + {0x9016c, 0x109}, > + {0x9016d, 0x47}, > + {0x9016e, 0x630}, > + {0x9016f, 0x109}, > + {0x90170, 0x8}, > + {0x90171, 0x618}, > + {0x90172, 0x109}, > + {0x90173, 0x8}, > + {0x90174, 0xe0}, > + {0x90175, 0x109}, > + {0x90176, 0x0}, > + {0x90177, 0x7c8}, > + {0x90178, 0x109}, > + {0x90179, 0x8}, > + {0x9017a, 0x8140}, > + {0x9017b, 0x10c}, > + {0x9017c, 0x0}, > + {0x9017d, 0x478}, > + {0x9017e, 0x109}, > + {0x9017f, 0x0}, > + {0x90180, 0x1}, > + {0x90181, 0x8}, > + {0x90182, 0x8}, > + {0x90183, 0x4}, > + {0x90184, 0x0}, > + {0x90006, 0x8}, > + {0x90007, 0x7c8}, > + {0x90008, 0x109}, > + {0x90009, 0x0}, > + {0x9000a, 0x400}, > + {0x9000b, 0x106}, > + {0xd00e7, 0x400}, > + {0x90017, 0x0}, > + {0x9001f, 0x2b}, > + {0x90026, 0x69}, > + {0x400d0, 0x0}, > + {0x400d1, 0x101}, > + {0x400d2, 0x105}, > + {0x400d3, 0x107}, > + {0x400d4, 0x10f}, > + {0x400d5, 0x202}, > + {0x400d6, 0x20a}, > + {0x400d7, 0x20b}, > + {0x2003a, 0x2}, > + {0x200be, 0x3}, > + {0x2000b, 0x75}, > + {0x2000c, 0xe9}, > + {0x2000d, 0x91c}, > + {0x2000e, 0x2c}, > + {0x9000c, 0x0}, > + {0x9000d, 0x173}, > + {0x9000e, 0x60}, > + {0x9000f, 0x6110}, > + {0x90010, 0x2152}, > + {0x90011, 0xdfbd}, > + {0x90012, 0x2060}, > + {0x90013, 0x6152}, > + {0x20010, 0x5a}, > + {0x20011, 0x3}, > + {0x40080, 0xe0}, > + {0x40081, 0x12}, > + {0x40082, 0xe0}, > + {0x40083, 0x12}, > + {0x40084, 0xe0}, > + {0x40085, 0x12}, > + {0x400fd, 0xf}, > + {0x400f1, 0xe}, > + {0x10011, 0x1}, > + {0x10012, 0x1}, > + {0x10013, 0x180}, > + {0x10018, 0x1}, > + {0x10002, 0x6209}, > + {0x100b2, 0x1}, > + {0x101b4, 0x1}, > + {0x102b4, 0x1}, > + {0x103b4, 0x1}, > + {0x104b4, 0x1}, > + {0x105b4, 0x1}, > + {0x106b4, 0x1}, > + {0x107b4, 0x1}, > + {0x108b4, 0x1}, > + {0x11011, 0x1}, > + {0x11012, 0x1}, > + {0x11013, 0x180}, > + {0x11018, 0x1}, > + {0x11002, 0x6209}, > + {0x110b2, 0x1}, > + {0x111b4, 0x1}, > + {0x112b4, 0x1}, > + {0x113b4, 0x1}, > + {0x114b4, 0x1}, > + {0x115b4, 0x1}, > + {0x116b4, 0x1}, > + {0x117b4, 0x1}, > + {0x118b4, 0x1}, > + {0x20089, 0x1}, > + {0x20088, 0x19}, > + {0xc0080, 0x0}, > + {0xd0000, 0x1}, > + > +}; > + > +static struct dram_fsp_msg ddr_dram_fsp_msg[] = { > + { > + /* P0 3733mts 1D */ > + .drate = 3733, > + .fw_type = FW_1D_IMAGE, > + .fsp_cfg = ddr_fsp0_cfg, > + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), > + > + }, > + > + { > + /* P0 3733mts 2D */ > + .drate = 3733, > + .fw_type = FW_2D_IMAGE, > + .fsp_cfg = ddr_fsp0_2d_cfg, > + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), > + }, > + > +}; > + > +/* ddr timing config params */ > +struct dram_timing_info dram_timing = { > + .ddrc_cfg = ddr_ddrc_cfg, > + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), > + .ddrphy_cfg = ddr_ddrphy_cfg, > + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), > + .fsp_msg = ddr_dram_fsp_msg, > + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), > + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, > + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), > + .ddrphy_pie = ddr_phy_pie, > + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), > + .fsp_table = { 3733, }, > + .fsp_cfg = ddr_dram_fsp_cfg, > + .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg), > +}; > diff --git a/board/phytec/imx93_phycore/spl.c > b/board/phytec/imx93_phycore/spl.c > new file mode 100644 > index 00000000000..6911f2800ad > --- /dev/null > +++ b/board/phytec/imx93_phycore/spl.c > @@ -0,0 +1,181 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2022 NXP > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + */ > + > +#include <command.h> > +#include <cpu_func.h> > +#include <hang.h> > +#include <image.h> > +#include <init.h> > +#include <log.h> > +#include <spl.h> > +#include <asm/global_data.h> > +#include <asm/io.h> > +#include <asm/arch/imx93_pins.h> > +#include <asm/arch/clock.h> > +#include <asm/arch/sys_proto.h> > +#include <asm/mach-imx/boot_mode.h> > +#include <asm/mach-imx/mxc_i2c.h> > +#include <asm/arch-mx7ulp/gpio.h> > +#include <asm/sections.h> > +#include <asm/mach-imx/syscounter.h> > +#include <asm/mach-imx/ele_api.h> > +#include <dm/uclass.h> > +#include <dm/device.h> > +#include <dm/uclass-internal.h> > +#include <dm/device-internal.h> > +#include <linux/delay.h> > +#include <asm/arch/clock.h> > +#include <asm/arch/ccm_regs.h> > +#include <asm/arch/ddr.h> > +#include <power/pmic.h> > +#include <power/pca9450.h> > +#include <asm/arch/trdc.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +/* > + * Will be part of drivers/power/regulator/pca9450.c > + * when pca9451a support is added. > + */ > +#define PCA9450_REG_PWRCTRL_TOFF_DEB BIT(5) > + > +int spl_board_boot_device(enum boot_device boot_dev_spl) > +{ > + if (IS_ENABLED(CONFIG_SPL_BOOTROM_SUPPORT)) > + return BOOT_DEVICE_BOOTROM;> + > + switch (boot_dev_spl) { > + case SD1_BOOT: > + case MMC1_BOOT: > + return BOOT_DEVICE_MMC1; > + case SD2_BOOT: > + case MMC2_BOOT: > + return BOOT_DEVICE_MMC2; > + default: > + return BOOT_DEVICE_NONE; > + } > +} Can we asume ONFIG_SPL_BOOTROM_SUPPORT will always be true here? In that case we can remove switch construct. > + > +void spl_board_init(void) > +{ > + puts("Normal Boot\n"); > +} > + > +void spl_dram_init(void) > +{ > + ddr_init(&dram_timing); > +} > + > +int power_init_board(void) > +{ > + struct udevice *dev; > + int ret; > + unsigned int val = 0; > + > + if (!IS_ENABLED(CONFIG_DM_PMIC_PCA9450)) > + return 0; > + > + ret = pmic_get("pmic@25", &dev); > + if (ret == -ENODEV) { > + puts("No pca9450@25\n"); > + return 0; > + } > + if (ret != 0) > + return ret; > + > + /* BUCKxOUT_DVS0/1 control BUCK123 output */ > + pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29); > + > + /* enable DVS control through PMIC_STBY_REQ */ > + pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59); > + > + ret = pmic_reg_read(dev, PCA9450_PWR_CTRL); > + if (ret < 0) > + return ret; > + > + val = ret; > + if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) { > + /* 0.8v for Low drive mode > + */ > + if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) { > + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x0c); > + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x0c); > + } else { > + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x10); > + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x10); > + } > + } else { > + /* 0.9v for Over drive mode > + */ > + if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) { > + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14); > + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x14); > + } else { > + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x18); > + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x18); > + } > + } > + > + /* set standby voltage to 0.65v */ > + if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) > + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0); > + else > + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4); > + > + /* I2C_LT_EN*/ > + pmic_reg_write(dev, 0xa, 0x3); > + > + return 0; > +} > + > +extern int imx9_probe_mu(void *ctx, struct event *event); > +void board_init_f(ulong dummy) > +{ > + int ret; > + > + /* Clear the BSS. */ > + memset(__bss_start, 0, __bss_end - __bss_start); > + > + timer_init(); > + > + arch_cpu_init(); > + > + board_early_init_f(); > + > + spl_early_init(); > + > + preloader_console_init(); > + > + ret = imx9_probe_mu(NULL, NULL); > + if (ret) { > + printf("Fail to init ELE API\n"); > + } else { > + printf("SOC: 0x%x\n", gd->arch.soc_rev); > + printf("LC: 0x%x\n", gd->arch.lifecycle); > + } > + > + power_init_board(); > + > + if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) > + set_arm_core_max_clk(); > + > + /* Init power of mix */ > + soc_power_init(); > + > + /* Setup TRDC for DDR access */ > + trdc_init(); > + > + /* DDR initialization */ > + spl_dram_init(); > + > + /* Put M33 into CPUWAIT for following kick */ > + ret = m33_prepare(); > + if (!ret) > + printf("M33 prepare ok\n"); > + > + board_init_r(NULL, 0); > +} > diff --git a/configs/imx93_phycore_defconfig b/configs/imx93_phycore_defconfig > new file mode 100644 > index 00000000000..4d9d790e0f6 > --- /dev/null > +++ b/configs/imx93_phycore_defconfig > @@ -0,0 +1,147 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_IMX9=y > +CONFIG_TEXT_BASE=0x80200000 > +CONFIG_SYS_MALLOC_LEN=0x2000000 > +CONFIG_SYS_MALLOC_F_LEN=0x18000 > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_NR_DRAM_BANKS=2 > +CONFIG_ENV_SIZE=0x4000 > +CONFIG_ENV_OFFSET=0x700000 > +CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg" > +CONFIG_DM_GPIO=y > +CONFIG_DEFAULT_DEVICE_TREE="imx93-phycore-segin" > +CONFIG_SPL_TEXT_BASE=0x2049A000 > +CONFIG_TARGET_IMX93_PHYCORE=y > +CONFIG_OF_LIBFDT_OVERLAY=y > +CONFIG_SPL_SERIAL=y > +CONFIG_SPL_DRIVERS_MISC=y > +CONFIG_SPL_STACK=0x20519dd0 > +CONFIG_SPL=y > +CONFIG_CMD_DEKBLOB=y > +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000 > +CONFIG_SPL_LOAD_IMX_CONTAINER=y > +CONFIG_SYS_LOAD_ADDR=0x80400000 > +CONFIG_SYS_MEMTEST_START=0x80000000 > +CONFIG_SYS_MEMTEST_END=0x90000000 > +CONFIG_REMAKE_ELF=y > +CONFIG_FIT=y > +CONFIG_FIT_VERBOSE=y > +CONFIG_SYS_MONITOR_LEN=524288 > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_BOOTDELAY=1 > +CONFIG_OF_SYSTEM_SETUP=y > +CONFIG_BOOTCOMMAND="run distro_bootcmd;run bsp_bootcmd" > +CONFIG_DEFAULT_FDT_FILE="imx93-phycore-segin.dtb" > +CONFIG_BOARD_EARLY_INIT_F=y > +CONFIG_BOARD_LATE_INIT=y > +CONFIG_SPL_MAX_SIZE=0x26000 > +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y > +CONFIG_SPL_BSS_START_ADDR=0x2051a000 > +CONFIG_SPL_BSS_MAX_SIZE=0x2000 > +CONFIG_SPL_BOARD_INIT=y > +CONFIG_SPL_BOOTROM_SUPPORT=y > +CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg" > +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set > +CONFIG_SYS_SPL_MALLOC=y > +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y > +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000 > +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 > +CONFIG_SPL_I2C=y > +CONFIG_SPL_POWER=y > +CONFIG_SPL_WATCHDOG=y > +CONFIG_SYS_PROMPT="u-boot=> " > +CONFIG_SYS_MAXARGS=64 > +CONFIG_SYS_CBSIZE=2048 > +CONFIG_SYS_PBSIZE=2074 > +CONFIG_CMD_ERASEENV=y > +CONFIG_CMD_NVEDIT_EFI=y > +CONFIG_CRC32_VERIFY=y > +CONFIG_CMD_MEMTEST=y > +CONFIG_CMD_CLK=y > +CONFIG_CMD_DFU=y > +CONFIG_CMD_FUSE=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_POWEROFF=y > +CONFIG_CMD_READ=y > +CONFIG_CMD_WDT=y > +CONFIG_BOOTP_PREFER_SERVERIP=y > +CONFIG_CMD_SNTP=y > +CONFIG_CMD_BMP=y > +CONFIG_CMD_CACHE=y > +CONFIG_CMD_EFIDEBUG=y > +CONFIG_CMD_RTC=y > +CONFIG_CMD_TIME=y > +CONFIG_CMD_GETTIME=y > +CONFIG_CMD_TIMER=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_CMD_HASH=y > +CONFIG_CMD_EXT4_WRITE=y > +CONFIG_OF_CONTROL=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_ENV_SOURCE_FILE="imx93_phycore" > +CONFIG_ENV_OVERWRITE=y > +CONFIG_ENV_IS_NOWHERE=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_SYS_MMC_ENV_DEV=1 > +CONFIG_USE_ETHPRIME=y > +CONFIG_ETHPRIME="eth1" > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_SPL_DM=y > +CONFIG_SYSCON=y > +CONFIG_SPL_CLK_IMX93=y > +CONFIG_CLK_IMX93=y > +CONFIG_DFU_MMC=y > +CONFIG_DFU_RAM=y > +CONFIG_GPIO_HOG=y > +CONFIG_IMX_RGPIO2P=y > +CONFIG_DM_PCA953X=y > +CONFIG_DM_I2C=y > +CONFIG_SYS_I2C_IMX_LPI2C=y > +CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_MMC_IO_VOLTAGE=y > +CONFIG_MMC_UHS_SUPPORT=y > +CONFIG_MMC_HS400_ES_SUPPORT=y > +CONFIG_MMC_HS400_SUPPORT=y > +CONFIG_FSL_USDHC=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SF_DEFAULT_SPEED=40000000 > +CONFIG_SPI_FLASH_STMICRO=y > +CONFIG_PHY_REALTEK=y > +CONFIG_DM_ETH_PHY=y > +CONFIG_PHY_GIGE=y > +CONFIG_DWC_ETH_QOS=y > +CONFIG_DWC_ETH_QOS_IMX=y > +CONFIG_FEC_MXC=y > +CONFIG_MII=y > +CONFIG_MIPI_DPHY_HELPERS=y > +CONFIG_PHY_IMX93_MIPI_DPHY=y > +CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_PINCTRL_IMX93=y > +CONFIG_POWER_DOMAIN=y > +CONFIG_IMX93_BLK_CTRL=y > +CONFIG_DM_PMIC=y > +CONFIG_DM_PMIC_PCA9450=y > +CONFIG_SPL_DM_PMIC_PCA9450=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_PCA9450=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_REGULATOR_GPIO=y > +CONFIG_DM_RTC=y > +CONFIG_RTC_PCF2131=y > +CONFIG_DM_SERIAL=y > +CONFIG_FSL_LPUART=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_NXP_FSPI=y > +CONFIG_DM_THERMAL=y > +CONFIG_IMX_TMU=y > +CONFIG_ULP_WATCHDOG=y > +CONFIG_WDT=y > +CONFIG_LZO=y > +CONFIG_BZIP2=y > diff --git a/doc/board/phytec/imx93_phycore.rst > b/doc/board/phytec/imx93_phycore.rst > new file mode 100644 > index 00000000000..f9b87691cdc > --- /dev/null > +++ b/doc/board/phytec/imx93_phycore.rst > @@ -0,0 +1,68 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > +imx93_phytec > +============ > + > +U-Boot for the NXP i.MX93 Phytec SoM of a Segin board > + > +Quick Start > +----------- > + > +- Get and Build the ARM Trusted firmware > +- Get the DDR firmware > +- Get ahab-container.img > +- Build U-Boot > +- Boot > + > +Get and Build the ARM Trusted firmware > +-------------------------------------- > + > +Note: srctree is U-Boot source directory > +Get ATF from: https://github.com/nxp-imx/imx-atf/ > +branch: lf_v2.8 > + > +.. code-block:: bash > + > + $ unset LDFLAGS > + $ make PLAT=imx93 bl31 > + $ cp build/imx93/release/bl31.bin $(srctree) > + > +Get the DDR firmware > +-------------------- > + > +.. code-block:: bash > + > + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin > + $ chmod +x firmware-imx-8.21.bin > + $ ./firmware-imx-8.21.bin > + $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree) > + > +Get ahab-container.img > +--------------------------------------- > + > +.. code-block:: bash > + > + $ wget > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin > + $ chmod +x firmware-sentinel-0.10.bin > + $ ./firmware-sentinel-0.10.bin > + $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree) > + > +Build U-Boot > +------------ > + > +.. code-block:: bash > + > + $ export CROSS_COMPILE=aarch64-poky-linux- > + $ make imx93_phytec_defconfig Rename to phycore-imx93_defconfig > + $ make > + > +Burn the flash.bin to MicroSD card offset 32KB: > + > +.. code-block:: bash > + > + $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc > + > +Boot > +---- > + > +Set Boot switch to SD boot > diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst > index 9996bce9741..a740f0cbae4 100644 > --- a/doc/board/phytec/index.rst > +++ b/doc/board/phytec/index.rst > @@ -7,5 +7,6 @@ PHYTEC > :maxdepth: 2 > > imx8mm-phygate-tauri-l > + imx93_phycore > phycore-imx8mm > phycore-imx8mp > diff --git a/include/configs/imx93_phycore.h b/include/configs/imx93_phycore.h > new file mode 100644 > index 00000000000..ee1322c9b52 > --- /dev/null > +++ b/include/configs/imx93_phycore.h > @@ -0,0 +1,47 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright 2022 NXP > + * Copyright (C) 2023 PHYTEC Messtechnik GmbH > + * Christoph Stoidner <c.stoid...@phytec.de> > + */ > + > +#ifndef __IMX93_PHYCORE_H > +#define __IMX93_PHYCORE_H > + > +#include <linux/sizes.h> > +#include <linux/stringify.h> > +#include <asm/arch/imx-regs.h> > + > +#define CFG_SYS_UBOOT_BASE \ > + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) > + > +#define BOOT_TARGET_DEVICES(func) \ > + func(MMC, mmc, 0) \ > + func(MMC, mmc, 1) > + > +#include <config_distro_bootcmd.h> > + > +/* Initial environment variables */ > +#define CFG_EXTRA_ENV_SETTINGS BOOTENV > + > +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 > +#define CFG_SYS_INIT_RAM_SIZE 0x200000 > + > +#define CFG_SYS_SDRAM_BASE 0x80000000 > +#define PHYS_SDRAM 0x80000000 > +#define PHYS_SDRAM_SIZE 0x80000000 > + > +#define CFG_SYS_FSL_USDHC_NUM 2 > + > +/* Using ULP WDOG for reset */ > +#define WDOG_BASE_ADDR WDG3_BASE_ADDR > + > +#if defined(CONFIG_CMD_NET) > +#define PHY_ANEG_TIMEOUT 20000 > +#endif > + > +#ifdef CONFIG_IMX_MATTER_TRUSTY > +#define NS_ARCH_ARM64 1 > +#endif > + > +#endif
