On Thu, 28 Dec 2023 13:29:15 +0800 Chuanhong Guo <gch981...@gmail.com> wrote:
Hi, thanks for taking care and sending a patch! > FriendlyElec NanoPi Duo2 is a tiny SBC with Allwinner H3 and > Ampak AP6212 WiFi module. The device-tree for it is already > available in u-boot source tree. Add a default config for it. > > Signed-off-by: Chuanhong Guo <gch981...@gmail.com> > --- > configs/nanopi_duo2_defconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > create mode 100644 configs/nanopi_duo2_defconfig > > diff --git a/configs/nanopi_duo2_defconfig b/configs/nanopi_duo2_defconfig > new file mode 100644 > index 0000000000..5a2069789f > --- /dev/null > +++ b/configs/nanopi_duo2_defconfig > @@ -0,0 +1,11 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-duo2" > +CONFIG_SPL=y > +CONFIG_MACH_SUN8I_H3=y > +CONFIG_DRAM_CLK=408 > +# CONFIG_VIDEO_DE2 is not set > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_CONSOLE_MUX=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_OHCI_HCD=y Judging by the DT, this board has USB-OTG wired up correctly, so we should enable it, by adding: CONFIG_USB_MUSB_GADGET=y This would allow access to USB Ethernet, fastboot or UMS devices, which prove to be quite useful for U-Boot. Cheers, Andre
