On Fri, Jan 19, 2024 at 1:09 PM Marek Vasut <ma...@denx.de> wrote: > > The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init() > during the SPL start up. On this particular system, spl_board_init() > is used to reconfigure GIC clock parent to PLL2 500M, which is the > configuration expected by the Linux kernel. Enable SPL_BOARD_INIT > and fill in the GIC clock configuration code. > > Set GIC clock to 500 MHz for OD VDD_SOC. Kernel driver does not > allow to change it. Should set the clock after PMIC setting done. > Default is 400 MHz (system_pll1_800m with div = 2) set by ROM for > ND VDD_SOC. > > Signed-off-by: Marek Vasut <ma...@denx.de>
Applied, thanks.
