I'll post the patches as soon as I figure out how to get git to do it. The patches are fairly clean and works well for both an 8-bit bus and a 16-bit bus.
My biggest obstical is that I'm not all that familiar with GIT and we use SVN internally. -Aaron On Wednesday, March 30, 2011 01:01:42 AM Rogan Dawes wrote: > On 2011/03/26 8:32 AM, Aaron Williams wrote: > > I am still doing some testing and just added a fix today so that if a > > flash chip that supports both 8 and 16-bits is on an 8-bit bus the > > interface is set to 8-bits. I'll try and get patches out next week. > > > > So far it's working fairly well on all of our boards, most of which have > > an 8- bit bus but one has a 16-bit bus. I had to change all of the > > defined addresses for AMD parts and calculate the 16 and 32-bit > > addresses by applying a mask. > > > > The CFI code *should* work if there's an 8-bit part on a 16-bit bus, but > > it probably will not support two 8-bit parts in parallel. That should be > > doable with some work. > > > > -Aaron > > Hi Aaron, > > I'm looking forward to seeing your patches. With any luck, they'll also > work on my board, and a nasty hack can go away. :-) > > Regards, > > Rogan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
