Loading ATF is only supported from the R5, move the Kconfig symbol
definition to match.
Signed-off-by: Andrew Davis <a...@ti.com>
---
arch/arm/mach-k3/Kconfig | 7 -------
arch/arm/mach-k3/r5/Kconfig | 6 ++++++
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 03898424c95..45cf740bb1f 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -114,13 +114,6 @@ config K3_EARLY_CONS_IDX
Use this option to set the index of the serial device to be used
for the early console during SPL execution.
-config SYS_K3_SPL_ATF
- bool "Start Cortex-A from SPL"
- depends on CPU_V7R
- help
- Enabling this will try to start Cortex-A (typically with ATF)
- after SPL from R5.
-
config K3_ATF_LOAD_ADDR
hex "Load address of ATF image"
default 0x70000000
diff --git a/arch/arm/mach-k3/r5/Kconfig b/arch/arm/mach-k3/r5/Kconfig
index ae79f8ff6cd..317a6c4b67e 100644
--- a/arch/arm/mach-k3/r5/Kconfig
+++ b/arch/arm/mach-k3/r5/Kconfig
@@ -43,3 +43,9 @@ config K3_SYSFW_IMAGE_SPI_OFFS
help
Offset of the combined System Firmware and configuration image tree
blob to be loaded when booting from a SPI flash memory.
+
+config SYS_K3_SPL_ATF
+ bool "Start Cortex-A from SPL"
+ help
+ Enabling this will try to start Cortex-A (typically with ATF)
+ after SPL from R5.
--
2.39.2
