Hello Benjamin,
Am Mittwoch, dem 31.01.2024 um 09:45 +0100 schrieb Benjamin Hahn: > Signed-off-by: Benjamin Hahn <b.h...@phytec.de> please add a proper patch description. Adding only a subject line ist not enough. Thanks, Teresa > --- > arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 162 > +++++++++++++++++++++++++++- > 1 file changed, 159 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts > b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts > index 6aa720bafe..c8640cac3e 100644 > --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts > +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts > @@ -19,6 +19,36 @@ > stdout-path = &uart1; > }; > > + reg_can1_stby: regulator-can1-stby { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1_reg>; > + gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; > + regulator-max-microvolt = <3300000>; > + regulator-min-microvolt = <3300000>; > + regulator-name = "can1-stby"; > + }; > + > + reg_can2_stby: regulator-can2-stby { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2_reg>; > + gpio = <&gpio3 21 GPIO_ACTIVE_LOW>; > + regulator-max-microvolt = <3300000>; > + regulator-min-microvolt = <3300000>; > + regulator-name = "can2-stby"; > + }; > + > + reg_usb1_vbus: regulator-usb1-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb1_vbus>; > + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; > + regulator-max-microvolt = <5000000>; > + regulator-min-microvolt = <5000000>; > + regulator-name = "usb1_host_vbus"; > + }; > + > reg_usdhc2_vmmc: regulator-usdhc2 { > compatible = "regulator-fixed"; > pinctrl-names = "default"; > @@ -57,6 +87,21 @@ > }; > }; > > +/* CAN FD */ > +&flexcan1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + xceiver-supply = <®_can1_stby>; > + status = "okay"; > +}; > + > +&flexcan2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + xceiver-supply = <®_can2_stby>; > + status = "okay"; > +}; > + > &i2c2 { > clock-frequency = <400000>; > pinctrl-names = "default", "gpio"; > @@ -76,15 +121,15 @@ > compatible = "nxp,pca9533"; > reg = <0x62>; > > - led1 { > + led-1 { > type = <PCA9532_TYPE_LED>; > }; > > - led2 { > + led-2 { > type = <PCA9532_TYPE_LED>; > }; > > - led3 { > + led-3 { > type = <PCA9532_TYPE_LED>; > }; > }; > @@ -101,8 +146,51 @@ > status = "okay"; > }; > > +/* USB1 Host mode Type-A */ > +&usb3_phy0 { > + vbus-supply = <®_usb1_vbus>; > + status = "okay"; > +}; > + > +&usb3_0 { > + status = "okay"; > +}; > + > +&usb_dwc3_0 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +/* USB2 4-port USB3.0 HUB */ > +&usb3_phy1 { > + status = "okay"; > +}; > + > +&usb3_1 { > + fsl,permanently-attached; > + fsl,disable-port-power-control; > + status = "okay"; > +}; > + > +&usb_dwc3_1 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +/* RS232/RS485 */ > +&uart2 { > + assigned-clocks = <&clk IMX8MP_CLK_UART2>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > /* SD-Card */ > &usdhc2 { > + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; > + assigned-clock-rates = <200000000>; > pinctrl-names = "default", "state_100mhz", "state_200mhz"; > pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; > pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; > @@ -113,6 +201,33 @@ > status = "okay"; > }; > > +&gpio1 { > + gpio-line-names = "", "", "X_PMIC_WDOG_B", "", > + "PMIC_SD_VSEL", "", "", "", "", "", > + "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; > +}; > + > +&gpio2 { > + gpio-line-names = "", "", "", "", > + "", "", "", "", "", "", > + "", "", "X_SD2_CD_B", "", "", "", > + "", "", "", "SD2_RESET_B"; > +}; > + > +&gpio3 { > + gpio-line-names = "", "", "", "", > + "", "", "", "", "", "", > + "", "", "", "", "", "", > + "", "", "", "", "nCAN1_EN", "nCAN2_EN"; > +}; > + > +&gpio4 { > + gpio-line-names = "", "", "", "", > + "", "", "", "", "", "", > + "", "", "", "", "", "", > + "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; > +}; > + > &iomuxc { > pinctrl_eqos: eqosgrp { > fsl,pins = < > @@ -134,6 +249,32 @@ > >; > }; > > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 > + MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 > + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 > + >; > + }; > + > + pinctrl_flexcan1_reg: flexcan1reggrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154 > + >; > + }; > + > + pinctrl_flexcan2_reg: flexcan2reggrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 > + >; > + }; > + > pinctrl_i2c2: i2c2grp { > fsl,pins = < > MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400 > 001c2 > @@ -161,6 +302,21 @@ > >; > }; > > + pinctrl_usb1_vbus: usb1vbusgrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 > + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 > + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140 > + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140 > + >; > + }; > + > pinctrl_usdhc2_pins: usdhc2-gpiogrp { > fsl,pins = < > MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 > -- PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber, Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855