Hi, On a verdin-imx8mp platform I am now unable to use the ethernet ports. My last build was from December (8f5043ee6d378d7c10d947cf48b047a5954ef5b3) so it was working fine then.
Boot log: ``` U-Boot SPL 2024.04-rc2-00002-gbef352dd57-dirty (Feb 16 2024 - 10:07:17 +0530) Training FAILED DDR configured as single rank SEC0: RNG instantiated Normal Boot WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) Trying to boot from BOOTROM Boot Stage: Primary boot Find img info 0x4802ae00, size 1044 Need continue download 1024 NOTICE: Do not release JR0 to NS as it can be used by HAB NOTICE: BL31: v2.10.0 (release):v2.10.0-44-g2e1e1664c NOTICE: BL31: Built : 13:09:20, Dec 1 2023 U-Boot 2024.04-rc2-00002-gbef352dd57-dirty (Feb 16 2024 - 10:07:17 +0530) CPU: Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: POR DRAM: 4 GiB Core: 171 devices, 28 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@30880000 Out: serial@30880000 Err: serial@30880000 Model: Toradex Verdin iMX8M Plus WB on Verdin Development Board SEC0: RNG instantiated Setting variant to nonwifi Net: Error: ethernet@30bf0000 No valid MAC address found. Can't find FEC0 clk rate: -22 Error: ethernet@30bf0000 No valid MAC address found. Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for mdio: addr 7 Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for FEC1: addr 7 Error: ethernet@30bf0000 No valid MAC address found. Can't find FEC0 clk rate: -22 Error: ethernet@30bf0000 No valid MAC address found. Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for mdio: addr 7 Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for FEC1: addr 7 Error: ethernet@30bf0000 No valid MAC address found. Error: ethernet@30bf0000 No valid MAC address found. No ethernet found. Hit any key to stop autoboot: 0 ```
