On 2024-02-17 01:22, Jonas Karlman wrote: > This series contains miscellaneous updates to defconfigs, syncs latest > device trees from linux, fixes an issue loading FIT from SD-card when > running SPL from eMMC and enables building a bootable SPI image on > RK3328 boards. > > I am also adding myself as a reviewer for the three RK3328 boards I own. > > Patch 1-7 updates boards to enable similar Kconfig options and use a > common order for from where to try and load FIT. > > Patch 8 fix loading FIT from SD-card when booting from eMMC by using > pinctrl for emmc and sdmmc in SPL. > > Patch 9-10 makes rockchip gpio and rng driver compatible with linux. > > Patch 11 sync latest rk3328 device tree files from linux v6.8-rc1. > > Patch 12 reverts an old commit that added duplicated code. > > Patch 13-15 enables building u-boot-rockchip-spi.bin for boards with > SPI flash. > > Changes in v2: > - Remove unused SPL drivers, I2C and PMIC > - Add helpful CMD_GPIO and CMD_REGULATOR to boards > - Add missing UART2 pinctrl nodes to soc u-boot.dtsi > - Mark the pinctrl node to be included in U-Boot proper pre-reloc phase > - Add SD-card IO-voltage related nodes to nanopi-r2 u-boot.dtsi > - Fix an ethernet issue on orangepi-r1-plus-lts > - Include SPI flash pinctrl nodes in SPL > - Collect r-b tags
Forgot to mention that following has been tested with this series: - Loading TPL/SPL and FIT from a combo of different sources, e.g. SPL in eMMC and FIT in SD-card or SPL in SD-card and FIT in eMMC etc. - USB host e.g. usb start; usb tree; usb stop; - Ethernet e.g. mdio list; mii info; net list; dhcp; - No pinctrl issue is reported with CONFIG_LOGLEVEL=7, i.e. no print of "pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19" - GPIO and regulator status using gpio status; regulator status; - Manually inspect TPL and SPL device tree $ dtc -I dtb -O dts tpl/u-boot-tpl.dtb $ dtc -I dtb -O dts spl/u-boot-spl.dtb On the following devices: - Rock64 v2.0 and v3.0 - ROC-RK3328-CC v1.0 and v1.3 - ROCK Pi E v1.21 - Orange Pi R1 Plus LTS Following devices have _not_ been tested: - NanoPi R2C/R2C Plus/R2S - Orange Pi R1 Plus A USB host issue was discovered on Orange Pi R1 Plus LTS during testing and I expect NanoPi R2* boards also have the same issue. A fix for this will be sent separately. The issue relates to fdt address translation of reg prop in usbdrd3 node. Regards, Jonas > > This series depends on the "rockchip: Update stack and bss addresses on > RK3328 and RK3399" series at [1] being applied _after_ this series. > Some boards may go over the simple malloc limit without that series also > applied. > > See [2] for a branch with the dependent series applied. > > [1] https://patchwork.ozlabs.org/cover/1887729/ > [2] https://github.com/Kwiboo/u-boot-rockchip/commits/rk3328-update-v2 > > Jonas Karlman (15): > rockchip: rk3328: Update default u-boot,spl-boot-order prop > rockchip: rk3328-evb: Update defconfig > rockchip: rk3328-rock64: Update defconfig > rockchip: rk3328-roc-cc: Update defconfig > rockchip: rk3328-rock-pi-e: Update defconfig > rockchip: rk3328-nanopi-r2: Update defconfig > rockchip: rk3328-orangepi-r1-plus: Update defconfig > rockchip: rk3328: Fix loading FIT from SD-card when booting from eMMC > gpio: rockchip: Use gpio alias id as gpio bank id > rng: rockchip: Use same compatible as linux > rockchip: rk3328: Sync device tree from linux v6.8-rc1 > Revert "rockchip: Allow booting from SPI" > rockchip: rk3328: Add support to build bootable SPI image > rockchip: rk3328-rock64: Enable boot from SPI NOR flash > rockchip: rk3328-orangepi-r1-plus: Enable boot from SPI NOR flash > > arch/arm/dts/rk3328-evb-u-boot.dtsi | 4 + > arch/arm/dts/rk3328-evb.dts | 1 + > .../dts/rk3328-nanopi-r2c-plus-u-boot.dtsi | 6 - > arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 24 +--- > arch/arm/dts/rk3328-nanopi-r2s.dts | 3 +- > .../rk3328-orangepi-r1-plus-lts-u-boot.dtsi | 32 ++---- > arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts | 4 +- > .../dts/rk3328-orangepi-r1-plus-u-boot.dtsi | 32 ++---- > arch/arm/dts/rk3328-orangepi-r1-plus.dts | 1 + > arch/arm/dts/rk3328-roc-cc-u-boot.dtsi | 22 +--- > arch/arm/dts/rk3328-roc-cc.dts | 3 +- > arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 17 --- > arch/arm/dts/rk3328-rock-pi-e.dts | 55 +++++++++ > arch/arm/dts/rk3328-rock64-u-boot.dtsi | 28 ++--- > arch/arm/dts/rk3328-rock64.dts | 1 + > arch/arm/dts/rk3328-u-boot.dtsi | 108 +++++++++++++++--- > arch/arm/dts/rk3328.dtsi | 64 ++++++++--- > arch/arm/dts/rk3399-u-boot.dtsi | 2 +- > arch/arm/mach-rockchip/rk3328/rk3328.c | 1 + > arch/arm/mach-rockchip/spl-boot-order.c | 3 - > board/rockchip/evb_rk3328/MAINTAINERS | 11 ++ > board/rockchip/evb_rk3328/README | 70 ------------ > configs/evb-rk3328_defconfig | 22 +++- > configs/nanopi-r2c-plus-rk3328_defconfig | 20 +++- > configs/nanopi-r2c-rk3328_defconfig | 20 +++- > configs/nanopi-r2s-rk3328_defconfig | 20 +++- > configs/orangepi-r1-plus-lts-rk3328_defconfig | 29 ++++- > configs/orangepi-r1-plus-rk3328_defconfig | 29 ++++- > configs/roc-cc-rk3328_defconfig | 15 ++- > configs/rock-pi-e-rk3328_defconfig | 17 +-- > configs/rock64-rk3328_defconfig | 23 +++- > doc/board/rockchip/rockchip.rst | 9 +- > drivers/gpio/rk_gpio.c | 7 +- > drivers/rng/rockchip_rng.c | 10 +- > 34 files changed, 432 insertions(+), 281 deletions(-) > delete mode 100644 board/rockchip/evb_rk3328/README >