Hello,
I have a Raspberry Pi 3B Plus which I want to integrate with U-boot
(v2023.10) .
I am using rpi_3_32b_defconfig to generate u-boot.bin. But while booting I
am getting below error
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Net: No ethernet found.
starting USB...
Bus usb@7e980000: USB DWC2
scanning bus usb@7e980000 for devices...
Error: lan78xx_eth address not set.
3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
In the "bdinfo", "current eth" is not set
U-Boot> bdinfo
boot_params = 0x00000100
DRAM bank = 0x00000000
-> start = 0x00000000
-> size = 0x3b400000
flashstart = 0x00000000
flashsize = 0x00000000
flashoffset = 0x00000000
baudrate = 115200 bps
relocaddr = 0x3b360000
reloc off = 0x3b358000
Build = 32-bit
current eth = unknown
eth-1addr = (not set)
IP addr = <NULL>
I also enabled LAN75xx in menuconfig and re-compiled u-boot. But still the
same error.
However on Raspberry Pi 3B, I don't see this error and "current eth" is set
to "smsc95xx_eth" and "ethaddr" is also available.
Can anyone please let me know the issue with Raspberry Pi 3b plus?
Thanks in advance.
