Hi,
+ Tom
On 28/02/24 14:28, Wadim Egorov wrote:
Use proper binary artifact names for HSFS devices.
Do not use the *_unsigned binaries.
Signed-off-by: Wadim Egorov <w.ego...@phytec.de>
---
Reviewed-by: Dhruva Gole <d-g...@ti.com>
doc/board/phytec/phycore-am62x.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/board/phytec/phycore-am62x.rst
b/doc/board/phytec/phycore-am62x.rst
index 1d641a78cf..bc6d524669 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -92,9 +92,9 @@ Assuming the uSD card is `/dev/mmcblk0`:
To boot from a micro SD card on a HSFS device simply copy the following
artifacts to the FAT partition:
-* tiboot3.bin from R5 build as tiboot3.bin
-* tispl.bin_unsigned from Cortex-A build as tispl.bin
-* u-boot.img_unsigned from Cortex-A build as u-boot.img
+* tiboot3.bin from R5 build
+* tispl.bin from Cortex-A build
+* u-boot.img from Cortex-A build
LGTM.
--
Thanks and Regards,
Dhruva Gole
