On Mon, 19 Feb 2024 at 14:11, Sumit Garg <sumit.g...@linaro.org> wrote: > > QCS404 supports Synopsys Designware Ethernet QOS IP and we already have > the corresponding glue layer present upstream as: > drivers/net/dwc_eth_qos_qcom.c. So enable corresponding support. > > Along with that it is possible for Qualcomm platforms to retrieve MAC > address from I2C eeprom present on board. So enable corresponding > support as well. > > Signed-off-by: Sumit Garg <sumit.g...@linaro.org> > --- > > This patch based upon Caleb's series [1]. > > [1] > https://lore.kernel.org/all/20240215-b4-qcom-common-target-v4-0-ed06355c6...@linaro.org/ >
Gentle ping. -Sumit > configs/qcom_defconfig | 24 +++++++++++++++++++++++- > 1 file changed, 23 insertions(+), 1 deletion(-) > > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index 222db6448aba..cbc612b44bd9 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -26,7 +26,6 @@ CONFIG_CMD_USB=y > CONFIG_CMD_CAT=y > CONFIG_CMD_BMP=y > CONFIG_CMD_LOG=y > -# CONFIG_NET is not set > CONFIG_BUTTON_QCOM_PMIC=y > CONFIG_CLK=y > CONFIG_CLK_QCOM_QCS404=y > @@ -65,3 +64,26 @@ CONFIG_VIDEO_SIMPLE=y > CONFIG_HEXDUMP=y > # CONFIG_GENERATE_SMBIOS_TABLE is not set > CONFIG_LMB_MAX_REGIONS=64 > +CONFIG_CMD_DHCP=y > +CONFIG_CMD_EEPROM=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_PING=y > +CONFIG_DM_ETH=y > +CONFIG_DM_ETH_PHY=y > +CONFIG_DM_MDIO=y > +CONFIG_DWC_ETH_QOS=y > +CONFIG_DWC_ETH_QOS_QCOM=y > +CONFIG_RGMII=y > +CONFIG_PHY_MICREL=y > +CONFIG_PHY_MICREL_KSZ90X1=y > +CONFIG_MISC=y > +CONFIG_NVMEM=y > +CONFIG_DM_I2C=y > +CONFIG_I2C_SUPPORT=y > +CONFIG_I2C_MUX=y > +CONFIG_I2C_EEPROM=y > +CONFIG_SYS_I2C=y > +CONFIG_SYS_I2C_QUP=y > +CONFIG_SYS_I2C_EEPROM_BUS=2 > +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > -- > 2.34.1 >
