On February 14, 2024 thus sayeth Andrew Davis: > There is a default ATF load address that is used for devices that have > ATF running in SRAM. For AM62 and AM62a, ATF runs from DRAM. Instead > of having to override the address in every defconfig, make add a > default for these ATF in DRAM devices. > > Signed-off-by: Andrew Davis <a...@ti.com>
Acked-by: Bryan Brattlof <b...@ti.com> > --- > arch/arm/mach-k3/Kconfig | 5 +++-- > configs/am62ax_evm_a53_defconfig | 1 - > configs/am62x_beagleplay_a53_defconfig | 1 - > configs/am62x_evm_a53_defconfig | 1 - > configs/phycore_am62x_a53_defconfig | 1 - > configs/verdin-am62_a53_defconfig | 1 - > 6 files changed, 3 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig > index 03898424c95..0bd3f9fa12d 100644 > --- a/arch/arm/mach-k3/Kconfig > +++ b/arch/arm/mach-k3/Kconfig > @@ -123,10 +123,11 @@ config SYS_K3_SPL_ATF > > config K3_ATF_LOAD_ADDR > hex "Load address of ATF image" > + default 0x9e780000 if (SOC_K3_AM625 || SOC_K3_AM62A7) I went ahead an added this to the TODO for 62p's respin ~Bryan