> Subject: [PATCH 1/2] clk: clk-imx8qxp: Add LPUART IPG entries
>
> Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock") the colibri-
> imx8qxp board no longer boots.
>
> The reason is that the imx8qxp clock driver does not handle the LPUART IPG
> clocks inside get_rate(), set_rate() and enable() functions.
>
> Fix the boot regression by adding the LPUART IPG entries.
>
> Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
> Reported-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
> Signed-off-by: Fabio Estevam <feste...@gmail.com>
Reviewed-by: Peng Fan <peng....@nxp.com>
> ---
> drivers/clk/imx/clk-imx8qxp.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
> index 8bf7e325481..d900d4cd528 100644
> --- a/drivers/clk/imx/clk-imx8qxp.c
> +++ b/drivers/clk/imx/clk-imx8qxp.c
> @@ -88,20 +88,23 @@ ulong imx8_clk_get_rate(struct clk *clk)
> resource = SC_R_SDHC_1;
> pm_clk = SC_PM_CLK_PER;
> break;
> - case IMX8QXP_UART0_IPG_CLK:
> case IMX8QXP_UART0_CLK:
> + case IMX8QXP_UART0_IPG_CLK:
> resource = SC_R_UART_0;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART1_CLK:
> + case IMX8QXP_UART1_IPG_CLK:
> resource = SC_R_UART_1;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART2_CLK:
> + case IMX8QXP_UART2_IPG_CLK:
> resource = SC_R_UART_2;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART3_CLK:
> + case IMX8QXP_UART3_IPG_CLK:
> resource = SC_R_UART_3;
> pm_clk = SC_PM_CLK_PER;
> break;
> @@ -170,18 +173,22 @@ ulong imx8_clk_set_rate(struct clk *clk, unsigned
> long rate)
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART0_CLK:
> + case IMX8QXP_UART0_IPG_CLK:
> resource = SC_R_UART_0;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART1_CLK:
> + case IMX8QXP_UART1_IPG_CLK:
> resource = SC_R_UART_1;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART2_CLK:
> + case IMX8QXP_UART2_IPG_CLK:
> resource = SC_R_UART_2;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART3_CLK:
> + case IMX8QXP_UART3_IPG_CLK:
> resource = SC_R_UART_3;
> pm_clk = SC_PM_CLK_PER;
> break;
> @@ -263,18 +270,22 @@ int __imx8_clk_enable(struct clk *clk, bool enable)
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART0_CLK:
> + case IMX8QXP_UART0_IPG_CLK:
> resource = SC_R_UART_0;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART1_CLK:
> + case IMX8QXP_UART1_IPG_CLK:
> resource = SC_R_UART_1;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART2_CLK:
> + case IMX8QXP_UART2_IPG_CLK:
> resource = SC_R_UART_2;
> pm_clk = SC_PM_CLK_PER;
> break;
> case IMX8QXP_UART3_CLK:
> + case IMX8QXP_UART3_IPG_CLK:
> resource = SC_R_UART_3;
> pm_clk = SC_PM_CLK_PER;
> break;
> --
> 2.34.1
