Add logic for booting systems with the RAUC update mechanism. This can
be reused by other phytec boards.

Signed-off-by: Leonard Anderweit <l.anderw...@phytec.de>
---
 include/env/phytec/rauc.env | 52 +++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 include/env/phytec/rauc.env

diff --git a/include/env/phytec/rauc.env b/include/env/phytec/rauc.env
new file mode 100644
index 000000000000..89e17ff70ec6
--- /dev/null
+++ b/include/env/phytec/rauc.env
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/* Logic to select a boot partition based on environment variables and switch
+ * to the other if the boot fails. */
+
+doraucboot=0
+
+raucbootpart0=1
+raucrootpart0=5
+raucbootpart1=2
+raucrootpart1=6
+
+raucinit=
+       echo Booting RAUC A/B system;
+       test -n "${BOOT_ORDER}" || env set BOOT_ORDER "system0 system1";
+       test -n "${BOOT_system0_LEFT}" || env set BOOT_system0_LEFT 3;
+       test -n "${BOOT_system1_LEFT}" || env set BOOT_system1_LEFT 3;
+       env set raucstatus;
+       for BOOT_SLOT in "${BOOT_ORDER}"; do
+               if test "x${raucstatus}" != "x"; then
+                       echo Skipping remaing slots!;
+               elif test "x${BOOT_SLOT}" = "xsystem0"; then
+                       if test ${BOOT_system0_LEFT} -gt 0; then
+                               echo Found valid slot A, ${BOOT_system0_LEFT} 
attempts remaining;
+                               setexpr BOOT_system0_LEFT ${BOOT_system0_LEFT} 
- 1;
+                               env set mmcpart ${raucbootpart0};
+                               env set mmcroot ${raucrootpart0};
+                               env set raucargs rauc.slot=system0;
+                               env set raucstatus success;
+                       fi;
+               elif test "x${BOOT_SLOT}" = "xsystem1"; then
+                       if test ${BOOT_system1_LEFT} -gt 0; then
+                               echo Found valid slot B, ${BOOT_system1_LEFT} 
attempts remaining;
+                               setexpr BOOT_system1_LEFT ${BOOT_system1_LEFT} 
- 1;
+                               env set mmcpart ${raucbootpart1};
+                               env set mmcroot ${raucrootpart1};
+                               env set raucargs rauc.slot=system1;
+                               env set raucstatus success;
+                       fi;
+               fi;
+       done;
+       if test -n "${raucstatus}"; then
+               env delete raucstatus;
+               env save;
+       else
+               echo WARN: No valid slot found;
+               env set BOOT_system0_LEFT 3;
+               env set BOOT_system1_LEFT 3;
+               env delete raucstatus;
+               env save;
+               reset;
+       fi;
-- 
2.25.1

Reply via email to