Hi Jonas,
On 2024/3/14 15:04, Jonas Karlman wrote:
Hi Kever,
On 2024-03-14 07:58, Kever Yang wrote:
On 2024/2/1 06:08, Jonas Karlman wrote:
Add a minimal generic RK3588S/RK3588 board that only have eMMC and SDMMC
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3588S/RK3588 boards that follow reference board design.
Also fix the alphabetical order of RK3588 boards listed in Makefile and
documentation.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Since rk356x already have a generic board, rk3588 can also have one.
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks, I will send a v2 with an updated defconfig to take advantage of
the new ROCKCHIP_COMMON_STACK_ADDR bss and stack addresses.
I have fix this and also other new boards defconfig, so you don't need
to do this.
Thanks,
- Kever
Regards,
Jonas
Thanks,
- Kever
---
This patch depend on the series "rockchip: rk35xx: Sync device tree
with linux v6.8-rc1" [1].
[1] https://patchwork.ozlabs.org/cover/1891669/
---
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/rk3588-generic-u-boot.dtsi | 3 ++
arch/arm/dts/rk3588-generic.dts | 44 ++++++++++++++++
board/rockchip/evb_rk3588/MAINTAINERS | 7 +++
configs/generic-rk3588_defconfig | 68 +++++++++++++++++++++++++
doc/board/rockchip/rockchip.rst | 3 +-
6 files changed, 127 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/rk3588-generic-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3588-generic.dts
create mode 100644 configs/generic-rk3588_defconfig
[snip]
