On 3/19/24 9:39 AM, Wadim Egorov wrote:
Am 18.03.24 um 22:48 schrieb Marek Vasut:
On 3/18/24 6:16 PM, Mathieu Othacehe wrote:
Enable the `usb` command and some USB drivers.
Signed-off-by: Mathieu Othacehe <othac...@gnu.org>
---
configs/imx93-phyboard-segin_defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/configs/imx93-phyboard-segin_defconfig
b/configs/imx93-phyboard-segin_defconfig
index 24f9bd553aa..5acb987b817 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx93-phyboard-segin_defconfig
@@ -23,6 +23,7 @@ CONFIG_SPL_STACK=0x20519dd0
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x720000
CONFIG_CMD_DEKBLOB=y
+CONFIG_CMD_USB=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
CONFIG_SYS_LOAD_ADDR=0x80400000
CONFIG_SYS_MEMTEST_START=0x80000000
@@ -132,6 +133,13 @@ CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_TMU=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
Shouldn't this by Phytec or similar USB IDs ?
AFAIK, PHYTEC does not have its own IDs registered yet. So the freescale
IDs should be fine.
Manufacturer can still be Phytec , can it not ?
