On 3/21/24 11:01 AM, Mattijs Korpershoek wrote:
Hi Marek,
Thank you for the patch.
On dim., mars 17, 2024 at 05:42, Marek Vasut <marek.vasut+rene...@mailbox.org>
wrote:
The dm_usb_gadget_handle_interrupts() has no place in board code. Move
this into DWC3 driver. The OMAP implementation is special, add new weak
dwc3_uboot_interrupt_status() function to decide whether DWC3 interrupt
handling should be called, and override it in OMAP DWC3 code, to repair
the special OMAP interrupt handling code until OMAP gets switched over
to DM UDC proper.
Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com>
Tested that I could scan for usb mass storage and that I can use
fastboot:
=> fastboot usb 0
crq->brequest:0x0
=> usb start
starting USB...
Bus usb@ff500000: Register 3000140 NbrPorts 3
Starting the controller
USB XHCI 1.10
scanning bus usb@ff500000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb storage
Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra
Type: Removable Hard Disk
Capacity: 29328.0 MB = 28.6 GB (60063744 x 512)
Tested-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> # vim3
Thank you!
Please feel free to pick this via DFU tree in a week or two, so others
can comment on this and test this too.
