Use byteorder conversion function instead of manually assembling data
from/to MCU.
Signed-off-by: Marek Behún <ka...@kernel.org>
---
drivers/gpio/turris_omnia_mcu.c | 80 +++++++++++++++++++--------------
1 file changed, 46 insertions(+), 34 deletions(-)
diff --git a/drivers/gpio/turris_omnia_mcu.c b/drivers/gpio/turris_omnia_mcu.c
index da9a6efe6d..c441d07d69 100644
--- a/drivers/gpio/turris_omnia_mcu.c
+++ b/drivers/gpio/turris_omnia_mcu.c
@@ -5,6 +5,7 @@
#include <dm.h>
#include <i2c.h>
#include <turris-omnia-mcu-interface.h>
+#include <asm/byteorder.h>
#include <asm/gpio.h>
#include <linux/log2.h>
@@ -51,27 +52,31 @@ static int turris_omnia_mcu_get_function(struct udevice
*dev, uint offset)
static int turris_omnia_mcu_get_value(struct udevice *dev, uint offset)
{
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
- u8 val16[2];
- u8 val32[4];
+ u32 val32;
+ u16 val16;
int ret;
switch (offset) {
/* bank 0 */
case 0 ... 15:
- ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val16, 2);
+ ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, (void *)&val16,
+ sizeof(val16));
if (ret)
return ret;
- return ((((u16)val16[1] << 8) | val16[0]) >> offset) & 0x1;
+
+ return !!(le16_to_cpu(val16) & BIT(offset));
/* bank 1 - supported only when FEAT_EXT_CMDS is set */
case (16 + 0) ... (16 + 31):
if (!(info->features & FEAT_EXT_CMDS))
return -EINVAL;
- ret = dm_i2c_read(dev, CMD_GET_EXT_STATUS_DWORD, val32, 4);
+
+ ret = dm_i2c_read(dev, CMD_GET_EXT_STATUS_DWORD, (void *)&val32,
+ sizeof(val32));
if (ret)
return ret;
- return ((((u32)val32[3] << 24) | ((u32)val32[2] << 16) |
- ((u32)val32[1] << 8) | val32[0]) >> (offset - 16)) &
0x1;
+
+ return !!(le32_to_cpu(val32) & BIT(offset - 16));
/* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is
set */
case (16 + 32 + 0) ... (16 + 32 + 15):
@@ -79,10 +84,13 @@ static int turris_omnia_mcu_get_value(struct udevice *dev,
uint offset)
return -EINVAL;
if (!(info->features & FEAT_PERIPH_MCU))
return -EINVAL;
- ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS, val16, 2);
+
+ ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS,
+ (void *)&val16, sizeof(val16));
if (ret)
return ret;
- return ((((u16)val16[1] << 8) | val16[0]) >> (offset - 16 -
32)) & 0x1;
+
+ return !!(le16_to_cpu(val16) & BIT(offset - 16 - 32));
default:
return -EINVAL;
@@ -92,30 +100,33 @@ static int turris_omnia_mcu_get_value(struct udevice *dev,
uint offset)
static int turris_omnia_mcu_set_value(struct udevice *dev, uint offset, int
value)
{
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
- u8 val16[2];
- u8 val32[4];
+ u16 valmask16[2];
+ u8 valmask8[2];
switch (offset) {
/* bank 0 */
case 0 ... 15:
switch (offset) {
case ilog2(STS_USB30_PWRON):
- val16[1] = CTL_USB30_PWRON;
+ valmask8[1] = CTL_USB30_PWRON;
break;
case ilog2(STS_USB31_PWRON):
- val16[1] = CTL_USB31_PWRON;
+ valmask8[1] = CTL_USB31_PWRON;
break;
case ilog2(STS_ENABLE_4V5):
- val16[1] = CTL_ENABLE_4V5;
+ valmask8[1] = CTL_ENABLE_4V5;
break;
case ilog2(STS_BUTTON_MODE):
- val16[1] = CTL_BUTTON_MODE;
+ valmask8[1] = CTL_BUTTON_MODE;
break;
default:
return -EINVAL;
}
- val16[0] = value ? val16[1] : 0;
- return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16,
sizeof(val16));
+
+ valmask8[0] = value ? valmask8[1] : 0;
+
+ return dm_i2c_write(dev, CMD_GENERAL_CONTROL, valmask8,
+ sizeof(valmask8));
/* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is
set */
case (16 + 32 + 0) ... (16 + 32 + 15):
@@ -123,11 +134,12 @@ static int turris_omnia_mcu_set_value(struct udevice
*dev, uint offset, int valu
return -EINVAL;
if (!(info->features & FEAT_PERIPH_MCU))
return -EINVAL;
- val32[3] = BIT(offset - 16 - 32) >> 8;
- val32[2] = BIT(offset - 16 - 32) & 0xff;
- val32[1] = value ? val32[3] : 0;
- val32[0] = value ? val32[2] : 0;
- return dm_i2c_write(dev, CMD_EXT_CONTROL, val32, sizeof(val32));
+
+ valmask16[1] = cpu_to_le16(BIT(offset - 16 - 32));
+ valmask16[0] = value ? valmask16[1] : 0;
+
+ return dm_i2c_write(dev, CMD_EXT_CONTROL, (void *)valmask16,
+ sizeof(valmask16));
default:
return -EINVAL;
@@ -216,25 +228,25 @@ static int turris_omnia_mcu_probe(struct udevice *dev)
{
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
- u16 status;
- u8 val[2];
+ u16 val;
int ret;
- ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val, 2);
- if (ret) {
- printf("Error: turris_omnia_mcu CMD_GET_STATUS_WORD failed:
%d\n", ret);
+ ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, (void *)&val, sizeof(val));
+ if (ret < 0) {
+ printf("Error: turris_omnia_mcu CMD_GET_STATUS_WORD failed:
%d\n",
+ ret);
return ret;
}
- status = ((u16)val[1] << 8) | val[0];
-
- if (status & STS_FEATURES_SUPPORTED) {
- ret = dm_i2c_read(dev, CMD_GET_FEATURES, val, 2);
- if (ret) {
- printf("Error: turris_omnia_mcu CMD_GET_FEATURES
failed: %d\n", ret);
+ if (le16_to_cpu(val) & STS_FEATURES_SUPPORTED) {
+ ret = dm_i2c_read(dev, CMD_GET_FEATURES, (void *)&val,
+ sizeof(val));
+ if (ret < 0) {
+ printf("Error: turris_omnia_mcu CMD_GET_FEATURES
failed: %d\n",
+ ret);
return ret;
}
- info->features = ((u16)val[1] << 8) | val[0];
+ info->features = le16_to_cpu(val);
}
uc_priv->bank_name = "mcu_";
--
2.43.2
