On Tue, 2024-03-26 at 14:35 +0000, Christopher Obbard wrote: > Hi Martyn. > > On Tue, 2024-03-26 at 14:26 +0000, Martyn Welch wrote: > > With the current config for tha SK-AM62, fdtfile isn't set in the > > U-Boot > > environment. When using bootflow to boot from a block device, where > > the > > extlinux.conf file specifies `fdtdir`, a fallback device tree is > > being > > constructed from the `soc` (`k3`) and `board` (`am62x`) environment > > variables, resulting in u-Boot trying to retrieve > > `/dtbs/6.8.1+/k3-am62x.dtb`. This file doesn't exist. > > > > The environment variables `default_device_tree` and > > `default_device_tree_arch` are set in the config, the `findfdt` > > script > > can be called to construct `fdtfile` from the environment variables > > set > > by these config options, however this script currently isn't being > > run. > > > > Calling this script results in the correct device tree being > > retrieved: > > > > Retrieving file: /dtbs/6.8.1+/ti/k3-am625-sk.dtb > > > > Many boards are calling this script as part of their boot command. > > The > > am62x currently isn't. Rectify this so that booting works > > correctly. > > > > Signed-off-by: Martyn Welch <martyn.we...@collabora.com> > > Would this also be appropriate to add to the defconfig for other > AM62x boards > (e.g beagleplay) ? >
Hi Chris, Probably, but this is the only board I have available to test. Martyn > Anyway, for this device: > > Reviewed-by: Christopher Obbard <chris.obb...@collabora.com> > > > --- > > configs/am62x_evm_a53_defconfig | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/configs/am62x_evm_a53_defconfig > > b/configs/am62x_evm_a53_defconfig > > index 78287ec18a..e373e44a93 100644 > > --- a/configs/am62x_evm_a53_defconfig > > +++ b/configs/am62x_evm_a53_defconfig > > @@ -30,7 +30,7 @@ CONFIG_SPL_LOAD_FIT=y > > CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 > > CONFIG_BOOTSTD_FULL=y > > CONFIG_SYS_BOOTM_LEN=0x800000 > > -CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" > > +CONFIG_BOOTCOMMAND="run findfdt; run envboot; bootflow scan -lb" > > CONFIG_BOARD_LATE_INIT=y > > CONFIG_SPL_MAX_SIZE=0x58000 > > CONFIG_SPL_HAS_BSS_LINKER_SECTION=y > > Thanks! > > Chris