On 3/26/24 18:08, Marek Vasut wrote:
> On 3/19/24 11:22 AM, Patrice CHOTARD wrote:
>>
>>
>> On 3/19/24 03:44, Marek Vasut wrote:
>>> Define dfu_alt_info with SPI NOR layout to make it easy to
>>> install or update bootloader in the SPI NOR using dfu-util.
>>>
>>> Use the following U-Boot commands to start DFU mode:
>>> "
>>> => sf probe && dfu 0 mtd
>>> "
>>>
>>> Use the following dfu-util invocation on Host PC to install binaries:
>>> "
>>> $ dfu-util -w -a 0 -D
>>> build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
>>> $ dfu-util -w -a 1 -D
>>> build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
>>> $ dfu-util -w -a 2 -D build/stm32mp1/release/fip.bin
>>> "
>>>
>>> Signed-off-by: Marek Vasut <ma...@denx.de>
>>> ---
>>> Cc: Patrice Chotard <patrice.chot...@foss.st.com>
>>> Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
>>> Cc: Tom Rini <tr...@konsulko.com>
>>> Cc: u-b...@dh-electronics.com
>>> Cc: u-boot@lists.denx.de
>>> Cc: uboot-st...@st-md-mailman.stormreply.com
>>> ---
>>> include/configs/stm32mp13_common.h | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/include/configs/stm32mp13_common.h
>>> b/include/configs/stm32mp13_common.h
>>> index 5b0658ced92..d6e4f8fd915 100644
>>> --- a/include/configs/stm32mp13_common.h
>>> +++ b/include/configs/stm32mp13_common.h
>>> @@ -63,6 +63,7 @@
>>> "fi;\0"
>>> #define STM32MP_EXTRA \
>>> + "dfu_alt_info=mtd nor0=fsbl1 raw 0x0 0x40000;fsbl2 raw 0x40000
>>> 0x40000;uboot raw 0x80000 0x160000\0" \
>>> "env_check=if env info -p -d -q; then env save; fi\0" \
>>> "boot_net_usb_start=true\0"
>>>
>>
>>
>> Hi Marek
>>
>> On our STM32 board, the dfu_alt_info is build dynamically, we have
>> CONFIG_SET_DFU_ALT_INFO enable
>> Can you add the dfu_alt_info in a specific stm32mp13_dhxx.common.h instead ?
>
> You can drop this patch.
Ok thanks
Patrice
