Add header containing all MCU command definitions and use it in board
code and in MCU driver.
Signed-off-by: Marek Behún <ka...@kernel.org>
---
board/CZ.NIC/turris_omnia/turris_omnia.c | 81 +++-----
drivers/gpio/turris_omnia_mcu.c | 54 +----
include/turris-omnia-mcu-interface.h | 248 +++++++++++++++++++++++
3 files changed, 272 insertions(+), 111 deletions(-)
create mode 100644 include/turris-omnia-mcu-interface.h
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c
b/board/CZ.NIC/turris_omnia/turris_omnia.c
index adeb69a205..6c2d7da528 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -23,6 +23,7 @@
#include <fdt_support.h>
#include <hexdump.h>
#include <time.h>
+#include <turris-omnia-mcu-interface.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <u-boot/crc.h>
@@ -59,46 +60,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define A385_WD_RSTOUT_UNMASK MVEBU_REGISTER(0x20704)
#define A385_WD_RSTOUT_UNMASK_GLOBAL BIT(8)
-enum mcu_commands {
- CMD_GET_STATUS_WORD = 0x01,
- CMD_GET_RESET = 0x09,
- CMD_GET_FW_VERSION_APP = 0x0a,
- CMD_WATCHDOG_STATE = 0x0b,
- CMD_GET_FW_VERSION_BOOT = 0x0e,
-
- /* available if STS_FEATURES_SUPPORTED bit set in status word */
- CMD_GET_FEATURES = 0x10,
-
- /* available if EXT_CMD bit set in features */
- CMD_EXT_CONTROL = 0x12,
-};
-
-enum status_word_bits {
- STS_MCU_TYPE_MASK = GENMASK(1, 0),
- STS_MCU_TYPE_STM32 = 0,
- STS_MCU_TYPE_GD32 = 1,
- STS_MCU_TYPE_MKL = 2,
- STS_MCU_TYPE_UNKN = 3,
- STS_FEATURES_SUPPORTED = BIT(2),
- CARD_DET_STSBIT = 0x0010,
- MSATA_IND_STSBIT = 0x0020,
-};
-
-/* CMD_GET_FEATURES */
-enum features_e {
- FEAT_PERIPH_MCU = BIT(0),
- FEAT_EXT_CMDS = BIT(1),
-};
-
-/* CMD_EXT_CONTROL */
-enum ext_ctl_e {
- EXT_CTL_nRES_LAN = BIT(1),
- EXT_CTL_nRES_PHY = BIT(2),
- EXT_CTL_nPERST0 = BIT(3),
- EXT_CTL_nPERST1 = BIT(4),
- EXT_CTL_nPERST2 = BIT(5),
-};
-
/*
* Those values and defines are taken from the Marvell U-Boot version
* "u-boot-2013.01-2014_T3.0"
@@ -219,7 +180,7 @@ static bool disable_mcu_watchdog(void)
puts("Disabling MCU watchdog... ");
- ret = omnia_mcu_write(CMD_WATCHDOG_STATE, "\x00", 1);
+ ret = omnia_mcu_write(CMD_SET_WATCHDOG_STATE, "\x00", 1);
if (ret) {
printf("omnia_mcu_write failed: %i\n", ret);
return false;
@@ -256,17 +217,17 @@ static bool omnia_detect_sata(const char *msata_slot)
return false;
}
- if (!(stsword & CARD_DET_STSBIT)) {
+ if (!(stsword & STS_CARD_DET)) {
puts("none\n");
return false;
}
- if (stsword & MSATA_IND_STSBIT)
+ if (stsword & STS_MSATA_IND)
puts("mSATA\n");
else
puts("MiniPCIe\n");
- return stsword & MSATA_IND_STSBIT ? true : false;
+ return stsword & STS_MSATA_IND;
}
static bool omnia_detect_wwan_usb3(const char *wwan_slot)
@@ -393,18 +354,7 @@ static int omnia_get_ram_size_gb(void)
static const char * const omnia_get_mcu_type(void)
{
- static const char * const mcu_types[] = {
- [STS_MCU_TYPE_STM32] = "STM32",
- [STS_MCU_TYPE_GD32] = "GD32",
- [STS_MCU_TYPE_MKL] = "MKL",
- [STS_MCU_TYPE_UNKN] = "unknown",
- };
- static const char * const mcu_types_with_perip_resets[] = {
- [STS_MCU_TYPE_STM32] = "STM32 (with peripheral resets)",
- [STS_MCU_TYPE_GD32] = "GD32 (with peripheral resets)",
- [STS_MCU_TYPE_MKL] = "MKL (with peripheral resets)",
- [STS_MCU_TYPE_UNKN] = "unknown (with peripheral resets)",
- };
+ static char result[] = "xxxxxxx (with peripheral resets)";
u16 stsword, features;
int ret;
@@ -412,13 +362,28 @@ static const char * const omnia_get_mcu_type(void)
if (ret)
return "unknown";
+ switch (stsword & STS_MCU_TYPE_MASK) {
+ case STS_MCU_TYPE_STM32:
+ strcpy(result, "STM32");
+ break;
+ case STS_MCU_TYPE_GD32:
+ strcpy(result, "GD32");
+ break;
+ case STS_MCU_TYPE_MKL:
+ strcpy(result, "MKL");
+ break;
+ default:
+ strcpy(result, "unknown");
+ break;
+ }
+
if (stsword & STS_FEATURES_SUPPORTED) {
ret = omnia_mcu_read(CMD_GET_FEATURES, &features,
sizeof(features));
if (ret == 0 && (features & FEAT_PERIPH_MCU))
- return mcu_types_with_perip_resets[stsword &
STS_MCU_TYPE_MASK];
+ strcat(result, " (with peripheral resets)");
}
- return mcu_types[stsword & STS_MCU_TYPE_MASK];
+ return result;
}
static const char * const omnia_get_mcu_version(void)
diff --git a/drivers/gpio/turris_omnia_mcu.c b/drivers/gpio/turris_omnia_mcu.c
index 2d2bf2d1dd..da9a6efe6d 100644
--- a/drivers/gpio/turris_omnia_mcu.c
+++ b/drivers/gpio/turris_omnia_mcu.c
@@ -4,62 +4,10 @@
#include <common.h>
#include <dm.h>
#include <i2c.h>
+#include <turris-omnia-mcu-interface.h>
#include <asm/gpio.h>
#include <linux/log2.h>
-enum commands_e {
- CMD_GET_STATUS_WORD = 0x01,
- CMD_GENERAL_CONTROL = 0x02,
-
- /* available if STS_FEATURES_SUPPORTED bit set in status word */
- CMD_GET_FEATURES = 0x10,
-
- /* available if FEAT_EXT_CMDS bit is set in features */
- CMD_GET_EXT_STATUS_DWORD = 0x11,
-
- /* available if FEAT_EXT_CMDS and FEAT_PERIPH_MCU bits are set in
featurs */
- CMD_EXT_CONTROL = 0x12,
- CMD_GET_EXT_CONTROL_STATUS = 0x13,
-};
-
-/* CMD_GET_STATUS_WORD */
-enum sts_word_e {
- STS_MCU_TYPE_MASK = GENMASK(1, 0),
- STS_MCU_TYPE_STM32 = 0,
- STS_MCU_TYPE_GD32 = 1,
- STS_MCU_TYPE_MKL = 2,
- STS_FEATURES_SUPPORTED = BIT(2),
- STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3),
- STS_CARD_DET = BIT(4),
- STS_MSATA_IND = BIT(5),
- STS_USB30_OVC = BIT(6),
- STS_USB31_OVC = BIT(7),
- STS_USB30_PWRON = BIT(8),
- STS_USB31_PWRON = BIT(9),
- STS_ENABLE_4V5 = BIT(10),
- STS_BUTTON_MODE = BIT(11),
- STS_BUTTON_PRESSED = BIT(12),
- STS_BUTTON_COUNTER_MASK = GENMASK(15, 13)
-};
-
-/* CMD_GENERAL_CONTROL */
-enum ctl_byte_e {
- CTL_LIGHT_RST = BIT(0),
- CTL_HARD_RST = BIT(1),
- /*CTL_RESERVED = BIT(2),*/
- CTL_USB30_PWRON = BIT(3),
- CTL_USB31_PWRON = BIT(4),
- CTL_ENABLE_4V5 = BIT(5),
- CTL_BUTTON_MODE = BIT(6),
- CTL_BOOTLOADER = BIT(7)
-};
-
-/* CMD_GET_FEATURES */
-enum features_e {
- FEAT_PERIPH_MCU = BIT(0),
- FEAT_EXT_CMDS = BIT(1),
-};
-
struct turris_omnia_mcu_info {
u16 features;
};
diff --git a/include/turris-omnia-mcu-interface.h
b/include/turris-omnia-mcu-interface.h
new file mode 100644
index 0000000000..3c4638f732
--- /dev/null
+++ b/include/turris-omnia-mcu-interface.h
@@ -0,0 +1,248 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
+ *
+ * 2023 by Marek Behún <ka...@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H
+#define __TURRIS_OMNIA_MCU_INTERFACE_H
+
+#include <linux/bitops.h>
+
+enum omnia_commands_e {
+ CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back
*/
+ CMD_GENERAL_CONTROL = 0x02,
+ CMD_LED_MODE = 0x03, /* default/user */
+ CMD_LED_STATE = 0x04, /* LED on/off */
+ CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN +
BLUE */
+ CMD_USER_VOLTAGE = 0x06,
+ CMD_SET_BRIGHTNESS = 0x07,
+ CMD_GET_BRIGHTNESS = 0x08,
+ CMD_GET_RESET = 0x09,
+ CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */
+ CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable
+ * 1 - enable / ping
+ * after boot watchdog is
started
+ * with 2 minutes timeout
+ */
+
+ /* CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */
+
+ CMD_GET_WATCHDOG_STATE = 0x0D,
+ CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B git hash number */
+ CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */
+
+ /* available if FEATURES_SUPPORTED bit set in status word */
+ CMD_GET_FEATURES = 0x10,
+
+ /* available if EXT_CMD bit set in features */
+ CMD_GET_EXT_STATUS_DWORD = 0x11,
+ CMD_EXT_CONTROL = 0x12,
+ CMD_GET_EXT_CONTROL_STATUS = 0x13,
+
+ /* available if NEW_INT_API bit set in features */
+ CMD_GET_INT_AND_CLEAR = 0x14,
+ CMD_GET_INT_MASK = 0x15,
+ CMD_SET_INT_MASK = 0x16,
+
+ /* available if FLASHING bit set in features */
+ CMD_FLASH = 0x19,
+
+ /* available if WDT_PING bit set in features */
+ CMD_SET_WDT_TIMEOUT = 0x20,
+ CMD_GET_WDT_TIMELEFT = 0x21,
+
+ /* available if POWEROFF_WAKEUP bit set in features */
+ CMD_SET_WAKEUP = 0x22,
+ CMD_GET_UPTIME_AND_WAKEUP = 0x23,
+ CMD_POWER_OFF = 0x24,
+
+ /* available if USB_OVC_PROT_SETTING bit set in features */
+ CMD_SET_USB_OVC_PROT = 0x25,
+ CMD_GET_USB_OVC_PROT = 0x26,
+
+ /* available if TRNG bit set in features */
+ CMD_TRNG_COLLECT_ENTROPY = 0x28,
+
+ /* available if CRYPTO bit set in features */
+ CMD_CRYPTO_GET_PUBLIC_KEY = 0x29,
+ CMD_CRYPTO_SIGN_MESSAGE = 0x2A,
+ CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B,
+
+ /* available if BOARD_INFO it set in features */
+ CMD_BOARD_INFO_GET = 0x2C,
+ CMD_BOARD_INFO_BURN = 0x2D,
+
+ /* available only at address 0x2b (led-controller) */
+ /* available only if LED_GAMMA_CORRECTION bit set in features */
+ CMD_SET_GAMMA_CORRECTION = 0x30,
+ CMD_GET_GAMMA_CORRECTION = 0x31,
+
+ /* available only at address 0x2b (led-controller) */
+ /* available only if PER_LED_CORRECTION bit set in features */
+ /* available only if FROM_BIT_16_INVALID bit NOT set in features */
+ CMD_SET_LED_CORRECTIONS = 0x32,
+ CMD_GET_LED_CORRECTIONS = 0x33,
+};
+
+enum omnia_flashing_commands_e {
+ FLASH_CMD_UNLOCK = 0x01,
+ FLASH_CMD_SIZE_AND_CSUM = 0x02,
+ FLASH_CMD_PROGRAM = 0x03,
+ FLASH_CMD_RESET = 0x04,
+};
+
+enum omnia_sts_word_e {
+ STS_MCU_TYPE_MASK = GENMASK(1, 0),
+ STS_MCU_TYPE_STM32 = 0 << 0,
+ STS_MCU_TYPE_GD32 = 1 << 0,
+ STS_MCU_TYPE_MKL = 2 << 0,
+ STS_FEATURES_SUPPORTED = BIT(2),
+ STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3),
+ STS_CARD_DET = BIT(4),
+ STS_MSATA_IND = BIT(5),
+ STS_USB30_OVC = BIT(6),
+ STS_USB31_OVC = BIT(7),
+ STS_USB30_PWRON = BIT(8),
+ STS_USB31_PWRON = BIT(9),
+ STS_ENABLE_4V5 = BIT(10),
+ STS_BUTTON_MODE = BIT(11),
+ STS_BUTTON_PRESSED = BIT(12),
+ STS_BUTTON_COUNTER_MASK = GENMASK(15, 13)
+};
+
+enum omnia_ctl_byte_e {
+ CTL_LIGHT_RST = BIT(0),
+ CTL_HARD_RST = BIT(1),
+ /* BIT(2) is currently reserved */
+ CTL_USB30_PWRON = BIT(3),
+ CTL_USB31_PWRON = BIT(4),
+ CTL_ENABLE_4V5 = BIT(5),
+ CTL_BUTTON_MODE = BIT(6),
+ CTL_BOOTLOADER = BIT(7)
+};
+
+enum omnia_features_e {
+ FEAT_PERIPH_MCU = BIT(0),
+ FEAT_EXT_CMDS = BIT(1),
+ FEAT_WDT_PING = BIT(2),
+ FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3),
+ FEAT_LED_STATE_EXT = 1 << 3,
+ FEAT_LED_STATE_EXT_V32 = 2 << 3,
+ FEAT_LED_GAMMA_CORRECTION = BIT(5),
+ FEAT_NEW_INT_API = BIT(6),
+ FEAT_BOOTLOADER = BIT(7),
+ FEAT_FLASHING = BIT(8),
+ FEAT_NEW_MESSAGE_API = BIT(9),
+ FEAT_BRIGHTNESS_INT = BIT(10),
+ FEAT_POWEROFF_WAKEUP = BIT(11),
+ FEAT_CAN_OLD_MESSAGE_API = BIT(12),
+ FEAT_TRNG = BIT(13),
+ FEAT_CRYPTO = BIT(14),
+ FEAT_BOARD_INFO = BIT(15),
+
+ /*
+ * Orginally the features command replied only 16 bits. If more were
+ * read, either the I2C transaction failed or 0xff bytes were sent.
+ * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved
+ * to be zero.
+ */
+
+ /* Bits 16 - 19 correspond to bits 0 - 3 of status word */
+ FEAT_MCU_TYPE_MASK = GENMASK(17, 16),
+ FEAT_MCU_TYPE_STM32 = 0 << 16,
+ FEAT_MCU_TYPE_GD32 = 1 << 16,
+ FEAT_MCU_TYPE_MKL = 2 << 16,
+ FEAT_FEATURES_SUPPORTED = BIT(18),
+ FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19),
+
+ /* must not be set */
+ FEAT_FROM_BIT_16_INVALID = BIT(20),
+
+ FEAT_PER_LED_CORRECTION = BIT(21),
+ FEAT_USB_OVC_PROT_SETTING = BIT(22),
+};
+
+enum omnia_ext_sts_dword_e {
+ EXT_STS_SFP_nDET = BIT(0),
+ EXT_STS_LED_STATES_MASK = GENMASK(31, 12),
+ EXT_STS_WLAN0_MSATA_LED = BIT(12),
+ EXT_STS_WLAN1_LED = BIT(13),
+ EXT_STS_WLAN2_LED = BIT(14),
+ EXT_STS_WPAN0_LED = BIT(15),
+ EXT_STS_WPAN1_LED = BIT(16),
+ EXT_STS_WPAN2_LED = BIT(17),
+ EXT_STS_WAN_LED0 = BIT(18),
+ EXT_STS_WAN_LED1 = BIT(19),
+ EXT_STS_LAN0_LED0 = BIT(20),
+ EXT_STS_LAN0_LED1 = BIT(21),
+ EXT_STS_LAN1_LED0 = BIT(22),
+ EXT_STS_LAN1_LED1 = BIT(23),
+ EXT_STS_LAN2_LED0 = BIT(24),
+ EXT_STS_LAN2_LED1 = BIT(25),
+ EXT_STS_LAN3_LED0 = BIT(26),
+ EXT_STS_LAN3_LED1 = BIT(27),
+ EXT_STS_LAN4_LED0 = BIT(28),
+ EXT_STS_LAN4_LED1 = BIT(29),
+ EXT_STS_LAN5_LED0 = BIT(30),
+ EXT_STS_LAN5_LED1 = BIT(31),
+};
+
+enum omnia_ext_ctl_e {
+ EXT_CTL_nRES_MMC = BIT(0),
+ EXT_CTL_nRES_LAN = BIT(1),
+ EXT_CTL_nRES_PHY = BIT(2),
+ EXT_CTL_nPERST0 = BIT(3),
+ EXT_CTL_nPERST1 = BIT(4),
+ EXT_CTL_nPERST2 = BIT(5),
+ EXT_CTL_PHY_SFP = BIT(6),
+ EXT_CTL_PHY_SFP_AUTO = BIT(7),
+ EXT_CTL_nVHV_CTRL = BIT(8),
+};
+
+enum omnia_int_e {
+ INT_CARD_DET = BIT(0),
+ INT_MSATA_IND = BIT(1),
+ INT_USB30_OVC = BIT(2),
+ INT_USB31_OVC = BIT(3),
+ INT_BUTTON_PRESSED = BIT(4),
+ INT_SFP_nDET = BIT(5),
+ INT_BRIGHTNESS_CHANGED = BIT(6),
+ INT_TRNG = BIT(7),
+ INT_MESSAGE_SIGNED = BIT(8),
+
+ INT_LED_STATES_MASK = GENMASK(31, 12),
+ INT_WLAN0_MSATA_LED = BIT(12),
+ INT_WLAN1_LED = BIT(13),
+ INT_WLAN2_LED = BIT(14),
+ INT_WPAN0_LED = BIT(15),
+ INT_WPAN1_LED = BIT(16),
+ INT_WPAN2_LED = BIT(17),
+ INT_WAN_LED0 = BIT(18),
+ INT_WAN_LED1 = BIT(19),
+ INT_LAN0_LED0 = BIT(20),
+ INT_LAN0_LED1 = BIT(21),
+ INT_LAN1_LED0 = BIT(22),
+ INT_LAN1_LED1 = BIT(23),
+ INT_LAN2_LED0 = BIT(24),
+ INT_LAN2_LED1 = BIT(25),
+ INT_LAN3_LED0 = BIT(26),
+ INT_LAN3_LED1 = BIT(27),
+ INT_LAN4_LED0 = BIT(28),
+ INT_LAN4_LED1 = BIT(29),
+ INT_LAN5_LED0 = BIT(30),
+ INT_LAN5_LED1 = BIT(31),
+};
+
+enum omnia_cmd_poweroff_e {
+ CMD_POWER_OFF_POWERON_BUTTON = BIT(0),
+ CMD_POWER_OFF_MAGIC = 0xdead,
+};
+
+enum cmd_usb_ovc_prot_e {
+ CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0),
+ CMD_xET_USB_OVC_PROT_ENABLE = BIT(4),
+};
+
+#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */
--
2.43.2
