This patch series is a preparatory patch for supporting different versions of XEA board HW (until problem with Linux kernel support for multiple revisions is resorted).
Moreover, limits for u-boot.sb and u-boot.img has been set to avoid binary sizes exceeding in the future. Changes in v2: Remove "inline" from get_som_rev() function definition Squash with 'config: xea: Enable late board initialization to set revision variable' Update commit message Squash with 'arm: xea: Print information about XEA's SoM HW revision' Lukasz Majewski (4): arm: spl: xea: Remove I2S pins configuration from early initialization arm: spl: Add definition for PHY reset GPIO for XEA HW rev. 2 arm: xea: Add support for reading SoM (CPU) board HW revision config: xea: Add limits for SPL and u-boot proper sizes board/liebherr/xea/spl_xea.c | 21 +++++++++------ board/liebherr/xea/xea.c | 49 ++++++++++++++++++++++++++++++++++ configs/imx28_xea_defconfig | 4 +++ configs/imx28_xea_sb_defconfig | 1 + 4 files changed, 67 insertions(+), 8 deletions(-) -- 2.39.2