Sync rk3399-pinephone-pro device tree from linux v6.8.
Add SPI flash related node and options to support booting from SPI flash.
Remove REGULATOR_PWM=y, board does not use pwm-regulator compatible.
Add SYS_NS16550_MEM32=y to use readl/writel for serial console.
Remove SPL_TINY_MEMSET=y to use full memset in SPL.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 12 ++
arch/arm/dts/rk3399-pinephone-pro.dts | 147 ++++++++++++++++++
configs/pinephone-pro-rk3399_defconfig | 8 +-
3 files changed, 163 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
index dcfcec4f3072..6a248691e29d 100644
--- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -13,3 +13,15 @@
&sdmmc {
max-frequency = <20000000>;
};
+
+&spi1 {
+ status = "okay";
+
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts
b/arch/arm/dts/rk3399-pinephone-pro.dts
index 04403a76238b..61f3fec5a8b1 100644
--- a/arch/arm/dts/rk3399-pinephone-pro.dts
+++ b/arch/arm/dts/rk3399-pinephone-pro.dts
@@ -10,6 +10,7 @@
*/
/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/linux-event-codes.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -29,6 +30,31 @@
stdout-path = "serial2:115200n8";
};
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1600000>;
+ poll-interval = <100>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <600000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 50000 0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -102,6 +128,37 @@
/* WL_REG_ON on module */
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+
+ /* MIPI DSI panel 1.8v supply */
+ vcc1v8_lcd: vcc1v8-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc1v8_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys>;
+ gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ };
+
+ /* MIPI DSI panel 2.8v supply */
+ vcc2v8_lcd: vcc2v8-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc2v8_lcd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&vcc3v3_sys>;
+ gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ };
+};
+
+&cpu_alert0 {
+ temperature = <65000>;
+};
+&cpu_alert1 {
+ temperature = <68000>;
};
&cpu_l0 {
@@ -132,6 +189,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
@@ -326,6 +388,25 @@
};
};
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ touchscreen@14 {
+ compatible = "goodix,gt1158";
+ reg = <0x14>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
+ irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+ AVDD28-supply = <&vcc3v0_touch>;
+ VDDIO-supply = <&vcc3v0_touch>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1440>;
+ };
+};
+
&cluster0_opp {
opp04 {
status = "disabled";
@@ -355,6 +436,39 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+ clock-master;
+
+ ports {
+ mipi_out: port@1 {
+ #address-cells = <0>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "hannstar,hsd060bhw4";
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vcc2v8_lcd>;
+ iovcc-supply = <&vcc1v8_lcd>;
+ pinctrl-names = "default";
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
&pmu_io_domains {
pmu1830-supply = <&vcc_1v8>;
status = "okay";
@@ -422,6 +536,15 @@
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
@@ -472,3 +595,27 @@
&uart2 {
status = "okay";
};
+
+&vopb {
+ status = "okay";
+ assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
+ <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+ assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+ assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
+ <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+ assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/configs/pinephone-pro-rk3399_defconfig
b/configs/pinephone-pro-rk3399_defconfig
index c36898364b5d..1bb7b35a255c 100644
--- a/configs/pinephone-pro-rk3399_defconfig
+++ b/configs/pinephone-pro-rk3399_defconfig
@@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_ENV_SIZE=0x8000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
@@ -33,7 +33,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
@@ -54,18 +53,20 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_BUS=1
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SILICONKAISER=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM_ROCKCHIP_LPDDR4=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_USB=y
@@ -85,5 +86,4 @@ CONFIG_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_DISPLAY_ROCKCHIP_EDP=y
-CONFIG_SPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y
--
2.43.2
