On Thu, 28 Mar 2024 at 23:29, Caleb Connolly <caleb.conno...@linaro.org> wrote: > > Enable support for the DWC3 USB controller and required dependencies for > Qualcomm boards, specifically the DB845c: > * IOMMU / SMMU > * USB high-speed PHYs > * Mass storage and ACM gadgets > > Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org> > --- > configs/qcom_defconfig | 52 > ++++++++++++++++++++++++++++---------------------- > 1 file changed, 29 insertions(+), 23 deletions(-) >
Reviewed-by: Sumit Garg <sumit.g...@linaro.org> -Sumit > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index 8c4402e8f780..1abb57345ff1 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -17,10 +17,16 @@ CONFIG_LOG_MAX_LEVEL=9 > CONFIG_LOG_DEFAULT_LEVEL=4 > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_CMD_BOOTMENU=y > +CONFIG_CMD_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_BUS=2 > +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > +# CONFIG_CMD_BIND is not set > CONFIG_CMD_CLK=y > CONFIG_CMD_GPIO=y > +CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > CONFIG_CMD_UFS=y > CONFIG_CMD_USB=y > CONFIG_CMD_CAT=y > @@ -32,20 +38,39 @@ CONFIG_CLK=y > CONFIG_CLK_QCOM_QCS404=y > CONFIG_CLK_QCOM_SDM845=y > CONFIG_MSM_GPIO=y > CONFIG_QCOM_PMIC_GPIO=y > +CONFIG_DM_I2C=y > +CONFIG_SYS_I2C_QUP=y > +CONFIG_I2C_MUX=y > CONFIG_DM_KEYBOARD=y > CONFIG_BUTTON_KEYBOARD=y > +CONFIG_IOMMU=y > +CONFIG_QCOM_HYP_SMMU=y > +CONFIG_MISC=y > +CONFIG_NVMEM=y > +CONFIG_I2C_EEPROM=y > CONFIG_MMC_HS200_SUPPORT=y > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_ADMA=y > CONFIG_MMC_SDHCI_MSM=y > +CONFIG_PHY_MICREL=y > +CONFIG_PHY_MICREL_KSZ90X1=y > +CONFIG_DM_MDIO=y > +CONFIG_DM_ETH_PHY=y > +CONFIG_DWC_ETH_QOS=y > +CONFIG_DWC_ETH_QOS_QCOM=y > +CONFIG_RGMII=y > CONFIG_PHY=y > +CONFIG_PHY_QCOM_QUSB2=y > +CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y > CONFIG_PINCTRL=y > CONFIG_PINCTRL_QCOM_QCS404=y > CONFIG_PINCTRL_QCOM_SDM845=y > CONFIG_DM_PMIC=y > CONFIG_PMIC_QCOM=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > CONFIG_SCSI=y > CONFIG_MSM_SERIAL=y > CONFIG_MSM_GENI_SERIAL=y > CONFIG_SPMI_MSM=y > @@ -54,8 +79,12 @@ CONFIG_SYSINFO_SMBIOS=y > CONFIG_USB=y > CONFIG_USB_XHCI_HCD=y > CONFIG_USB_XHCI_DWC3=y > CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GENERIC=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_USB_FUNCTION_MASS_STORAGE=y > CONFIG_UFS=y > CONFIG_VIDEO=y > # CONFIG_VIDEO_FONT_8X16 is not set > CONFIG_VIDEO_FONT_16X32=y > @@ -64,27 +93,4 @@ CONFIG_NO_FB_CLEAR=y > CONFIG_VIDEO_SIMPLE=y > CONFIG_HEXDUMP=y > # CONFIG_GENERATE_SMBIOS_TABLE is not set > CONFIG_LMB_MAX_REGIONS=64 > -CONFIG_CMD_DHCP=y > -CONFIG_CMD_EEPROM=y > -CONFIG_CMD_I2C=y > -CONFIG_CMD_PING=y > -CONFIG_DM_ETH=y > -CONFIG_DM_ETH_PHY=y > -CONFIG_DM_MDIO=y > -CONFIG_DWC_ETH_QOS=y > -CONFIG_DWC_ETH_QOS_QCOM=y > -CONFIG_RGMII=y > -CONFIG_PHY_MICREL=y > -CONFIG_PHY_MICREL_KSZ90X1=y > -CONFIG_MISC=y > -CONFIG_NVMEM=y > -CONFIG_DM_I2C=y > -CONFIG_I2C_SUPPORT=y > -CONFIG_I2C_MUX=y > -CONFIG_I2C_EEPROM=y > -CONFIG_SYS_I2C=y > -CONFIG_SYS_I2C_QUP=y > -CONFIG_SYS_I2C_EEPROM_BUS=2 > -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > > -- > 2.44.0 >
