Hi Fabio > The mx6cuboxi_defconfig target supports several board > variants. All of these variants use the hummingboard devicetree in U-Boot. > > Currently, the devicetree model as well as the board variant name > are shown: > > ... > Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) > Board: MX6 Cubox-i > ... > > Printing the devicetree model that is used internally by U-Boot > may confuse users. > > Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the > board name is printed in board_late_init() instead. > > Signed-off-by: Fabio Estevam <feste...@gmail.com> > ---
U-Boot 2024.04-rc5-00003-g5565c24adb (Apr 01 2024 - 12:05:25 +0200) CPU: Freescale i.MX6Q rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 26C Reset cause: POR DRAM: 2 GiB Core: 84 devices, 19 uclasses, devicetree: fit WDT: Started watchdog@20bc000 with servicing every 1000ms (128s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Board: MX6 Cubox-i Net: eth0: ethernet@2188000 Tested-by: Christian Gmeiner <cgmei...@igalia.com> Thanks & Regards, Christian
