On 3/21/24 16:54, Michal Simek wrote:
From: Vishal Sagar <vishal.sa...@amd.com>

Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.

The patch was tested on kv260-revB/rev2 and also kr260-revB.

Signed-off-by: Vishal Sagar <vishal.sa...@amd.com>
Signed-off-by: Michal Simek <michal.si...@amd.com>
---

  arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 20 ++++++++++++++++++++
  arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 20 ++++++++++++++++++++
  2 files changed, 40 insertions(+)

diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso 
b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index 6c29f6574134..0a0cbd2b69ae 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -66,6 +66,18 @@
                #clock-cells = <0>;
                clock-frequency = <74250000>;
        };
+
+       dpcon {
+               compatible = "dp-connector";
+               label = "P11";
+               type = "full-size";
+
+               port {
+                       dpcon_in: endpoint {
+                               remote-endpoint = <&dpsub_dp_out>;
+                       };
+               };
+       };
  };
&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
@@ -130,6 +142,14 @@
        phy-names = "dp-phy0";
        phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
        assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+
+       ports {
+               port@5 {
+                       dpsub_dp_out: endpoint {
+                               remote-endpoint = <&dpcon_in>;
+                       };
+               };
+       };
  };
&zynqmp_dpdma {
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso 
b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index a4b4465d2038..a449c1161b1e 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -63,6 +63,18 @@
                #clock-cells = <0>;
                clock-frequency = <27000000>;
        };
+
+       dpcon {
+               compatible = "dp-connector";
+               label = "P11";
+               type = "full-size";
+
+               port {
+                       dpcon_in: endpoint {
+                               remote-endpoint = <&dpsub_dp_out>;
+                       };
+               };
+       };
  };
&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -97,6 +109,14 @@
        phy-names = "dp-phy0", "dp-phy1";
        phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
        assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+
+       ports {
+               port@5 {
+                       dpsub_dp_out: endpoint {
+                               remote-endpoint = <&dpcon_in>;
+                       };
+               };
+       };
  };
&zynqmp_dpdma {

Applied.
M

Reply via email to