Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
When RK3399 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there can be a fallback
to read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card may fail:
U-Boot SPL 2024.04-rc4 (Mar 17 2024 - 22:54:45 +0000)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC1
Card did not respond to voltage select! : -110
mmc_init: -95, time 12
spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices (err=-6)
### ERROR ### Please RESET the board ###
Fix this by tagging related sdhci and sdmmc pinctrl nodes with bootph
props. Also sort and move common nodes shared by all boards to the SoC
u-boot.dtsi. Finally imply the SPL_DM_SEQ_ALIAS Kconfig option to enable
it on all RK3399 boards.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Review may be easier if we added all missing nodes in one commit, and
then another commit to move the common nodes into rk3399-u-boot.dtsi.
For Puma,
Reviewed-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
Thanks,
Quentin
