On 1/24/24 01:18, Heinrich Schuchardt wrote:
> U-Boot does not support building kernel modules.
>
> Fixes: 3c0dbed232bd ("mmc: arm_pl180_mmci: adapt driver to DM usage")
> Fixes: 36645f45a048 ("drivers: mmc: Add sdhci driver for Broadcom iProc
> platform")
> Fixes: dadd43c14368 ("mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver")
> Fixes: b312c590bcd8 ("mmc: Add MMC support for stm32h7 Socs")
> Fixes: d24b69395949 ("mmc: mtk-sd: add SD/MMC host controller driver for
> MT7623 SoC")
> Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com>
> Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
Applied to u-boot-mmc/master, Thanks! Sorry for late.
Best Regards,
Jaehoon Chung
> ---
> drivers/mmc/Kconfig | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index ffde442cb29..9ce331677b8 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -83,7 +83,7 @@ config ARM_PL180_MMCI
> This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
> Interface (PL180, PL181 and compatible) support.
> If you have an ARM(R) platform with a Multimedia Card slot,
> - say Y or M here.
> + say Y here.
>
> config MMC_QUIRKS
> bool "Enable quirks"
> @@ -592,7 +592,7 @@ config MMC_SDHCI_IPROC
> This selects the iProc SD/MMC controller.
>
> If you have a Broadcom IPROC platform with SD or MMC devices,
> - say Y or M here.
> + say Y here.
>
> If unsure, say N.
>
> @@ -603,7 +603,7 @@ config MMC_SDHCI_F_SDH30
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> Needed by some Fujitsu/Socionext SoC for MMC / SD / SDIO support.
> - If you have a controller with this interface, say Y or M here.
> + If you have a controller with this interface, say Y here.
> If unsure, say N.
>
> config MMC_SDHCI_KONA
> @@ -797,7 +797,7 @@ config STM32_SDMMC2
> help
> This selects support for the SD/MMC controller on STM32H7 SoCs.
> If you have a board based on such a SoC and with a SD/MMC slot,
> - say Y or M here.
> + say Y here.
>
> config FTSDC010
> bool "Ftsdc010 SD/MMC controller Support"
> @@ -817,7 +817,7 @@ config MMC_MTK
> depends on OF_CONTROL
> help
> This selects the MediaTek(R) Secure digital and Multimedia card
> Interface.
> - If you have a machine with a integrated SD/MMC card reader, say Y or
> M here.
> + If you have a machine with a integrated SD/MMC card reader, say Y
> here.
> This is needed if support for any SD/SDIO/MMC devices is required.
> If unsure, say N.
>
