On 2/20/24 17:38, Marek Vasut wrote: > In case a CRC error occurs during DMA transfer, the transfer completion > flag is not set in TMIO_SD_DMA_INFO1 and the transfer would eventually > time out. The timeout could be very long in case the transfer consists > of a large amount of blocks, the base timeout is 10 seconds and every > block adds 100 us more. > > In case a CRC error does occur, a completion flag is set in a different > register, TMIO_SD_INFO1. Use this other completion flag to detect DMA > transfer ended and stop waiting for TMIO_SD_DMA_INFO1 completion flag. > This reduces the lengthy timeout in case of an error. The unconditional > check of TMIO_SD_DMA_INFO2 register for DMA related errors must not be > skipped in any case to actually recognize the DMA error and report it. > > Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org> > Reviewed-by: Paul Barker <paul.barker...@bp.renesas.com> > Tested-by: Paul Barker <paul.barker...@bp.renesas.com>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com> Sorry for late. Will apply to u-boot-mmc/master, Thanks! Best Regards, Jaehoon Chung > --- > Cc: Hai Pham <hai.pham...@renesas.com> > Cc: Jaehoon Chung <jh80.ch...@samsung.com> > Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org> > Cc: Paul Barker <paul.barker...@bp.renesas.com> > Cc: Peng Fan <peng....@nxp.com> > Cc: Sean Anderson <sean...@gmail.com> > Cc: Tom Rini <tr...@konsulko.com> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> > --- > drivers/mmc/tmio-common.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c > index 890c496b535..719c4830bc3 100644 > --- a/drivers/mmc/tmio-common.c > +++ b/drivers/mmc/tmio-common.c > @@ -299,7 +299,13 @@ static int tmio_sd_dma_wait_for_irq(struct udevice *dev, > u32 flag, > struct tmio_sd_priv *priv = dev_get_priv(dev); > long wait = 1000000 + 10 * blocks; > > - while (!(tmio_sd_readl(priv, TMIO_SD_DMA_INFO1) & flag)) { > + for (;;) { > + if (tmio_sd_readl(priv, TMIO_SD_DMA_INFO1) & flag) > + break; > + > + if (tmio_sd_readl(priv, TMIO_SD_INFO1) & TMIO_SD_INFO1_CMP) > + break; > + > if (wait-- < 0) { > dev_err(dev, "timeout during DMA\n"); > return -ETIMEDOUT;