[PATCH 3/3] button: qcom-pmic: add support for pmk8350 button configs

[Neil Armstrong]

Finally add the entries for the qcom,pmk8350-pwrkey and qcom,pmk8350-resin
found on PMICs used with SM8350 and later SoCs.

Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
 drivers/button/button-qcom-pmic.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/button/button-qcom-pmic.c 
b/drivers/button/button-qcom-pmic.c
index f6da958097c..6153601017b 100644
--- a/drivers/button/button-qcom-pmic.c
+++ b/drivers/button/button-qcom-pmic.c
@@ -36,6 +36,8 @@ struct qcom_pmic_btn_priv {
 #define PON_INT_RT_STS                        0x10
 #define  PON_KPDPWR_N_SET              0
 #define  PON_RESIN_N_SET               1
+#define  PON_GEN3_RESIN_N_SET          6
+#define  PON_GEN3_KPDPWR_N_SET         7
 
 static enum button_state_t qcom_pwrkey_get_state(struct udevice *dev)
 {
@@ -69,6 +71,18 @@ static const struct qcom_pmic_btn_data 
qcom_pmic_btn_data_table[] = {
                .code = KEY_DOWN,
                .label = "vol_down",
        },
+       {
+               .compatible = "qcom,pmk8350-pwrkey",
+               .status_bit = PON_GEN3_KPDPWR_N_SET,
+               .code = KEY_ENTER,
+               .label = "pwrkey",
+       },
+       {
+               .compatible = "qcom,pmk8350-resin",
+               .status_bit = PON_GEN3_RESIN_N_SET,
+               .code = KEY_DOWN,
+               .label = "vol_down",
+       },
 };
 
 static const struct qcom_pmic_btn_data *button_qcom_pmic_match(ofnode node)

-- 
2.34.1