Update defconfig for rk3308-rock-pi-s with new defaults.
Add OF_LIBFDT_OVERLAY=y to support device tree overlays.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to
allow use of U-Boot cmdline.
Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY.
Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to
allow full use of USB 2.0 host and otg ports.
Enable EFI_LOADER to allow EFI boot.
Also fix use of USB 2.0 otg port by removing improper use of phy-supply
and regulator-always-on props.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
v2: Keep DEBUG_UART_BOARD_INIT disabled
---
arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 8 ++++++
configs/rock-pi-s-rk3308_defconfig | 32 +++++++++--------------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
index 8d34ed1b3a36..a6fb8b12da38 100644
--- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
@@ -15,6 +15,10 @@
bootph-some-ram;
};
+&u2phy_otg {
+ /delete-property/ phy-supply;
+};
+
&uart0 {
bootph-all;
clock-frequency = <24000000>;
@@ -32,6 +36,10 @@
bootph-all;
};
+&vcc5v0_otg {
+ /delete-property/ regulator-always-on;
+};
+
&vdd_core {
regulator-init-microvolt = <1015000>;
};
diff --git a/configs/rock-pi-s-rk3308_defconfig
b/configs/rock-pi-s-rk3308_defconfig
index 27ee24a62290..37a124eae181 100644
--- a/configs/rock-pi-s-rk3308_defconfig
+++ b/configs/rock-pi-s-rk3308_defconfig
@@ -6,7 +6,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3308-rock-pi-s"
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_RK3308=y
-CONFIG_SPL_DRIVERS_MISC=y
CONFIG_TARGET_EVB_RK3308=y
CONFIG_DEBUG_UART_BASE=0xFF0A0000
CONFIG_DEBUG_UART_CLOCK=24000000
@@ -17,28 +16,19 @@ CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-rock-pi-s.dtb"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_SLEEP is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_CMD_RNG=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_REGULATOR=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
@@ -52,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PHY=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PINCTRL=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
@@ -63,15 +55,15 @@ CONFIG_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSINFO=y
CONFIG_SYSRESET=y
CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_SPL_TINY_MEMSET=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_LZO=y
CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
--
2.43.2
