[PATCH v1 20/25] ARM: dts: stm32: Update red led node for stm32mp157c-ed1-u-boot

[Patrice Chotard]

As indicated in kernel led dt-bindings, label is a deprecated
property, so remove it and use led node's name instead for
u-boot,error-led property.
Rename red led node's name to led-red.
Remove status property which is useless.
Add compatible = "gpio-leds" which is not present in kernel DT.

Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com>
---

 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi 
b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index edcbfee0fc7..09cfe9bc246 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -15,7 +15,7 @@
 
        config {
                u-boot,boot-led = "heartbeat";
-               u-boot,error-led = "error";
+               u-boot,error-led = "led-red";
                u-boot,mmc-env-partition = "fip";
        };
 
@@ -59,10 +59,10 @@
        };
 
        led {
-               red {
-                       label = "error";
+               compatible = "gpio-leds";
+
+               led-red {
                        gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
-                       status = "okay";
                };
        };
 };
-- 
2.25.1