All errors are generated by ./tools/qconfig.py -b -j8 -i whatever.
Error look like this:
warning: SPL_CLK_CCF (defined at drivers/clk/Kconfig:59) has leading or
trailing whitespace in its prompt
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
drivers/clk/Kconfig | 10 +++++-----
drivers/ddr/imx/imx8ulp/Kconfig | 2 +-
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 017dd260a544..bda6873be331 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -57,27 +57,27 @@ config CLK_BOSTON
Enable this to support the clocks
config SPL_CLK_CCF
- bool "SPL Common Clock Framework [CCF] support "
+ bool "SPL Common Clock Framework [CCF] support"
depends on SPL
help
Enable this option if you want to (re-)use the Linux kernel's Common
Clock Framework [CCF] code in U-Boot's SPL.
config SPL_CLK_COMPOSITE_CCF
- bool "SPL Common Clock Framework [CCF] composite clk support "
+ bool "SPL Common Clock Framework [CCF] composite clk support"
depends on SPL_CLK_CCF
help
Enable this option if you want to (re-)use the Linux kernel's Common
Clock Framework [CCF] composite code in U-Boot's SPL.
config CLK_CCF
- bool "Common Clock Framework [CCF] support "
+ bool "Common Clock Framework [CCF] support"
help
Enable this option if you want to (re-)use the Linux kernel's Common
Clock Framework [CCF] code in U-Boot's clock driver.
config CLK_COMPOSITE_CCF
- bool "Common Clock Framework [CCF] composite clk support "
+ bool "Common Clock Framework [CCF] composite clk support"
depends on CLK_CCF
help
Enable this option if you want to (re-)use the Linux kernel's Common
@@ -164,7 +164,7 @@ config CLK_OCTEON
Enable this to support the clocks on Octeon MIPS platforms.
config SANDBOX_CLK_CCF
- bool "Sandbox Common Clock Framework [CCF] support "
+ bool "Sandbox Common Clock Framework [CCF] support"
depends on SANDBOX
select CLK_CCF
help
diff --git a/drivers/ddr/imx/imx8ulp/Kconfig b/drivers/ddr/imx/imx8ulp/Kconfig
index 5448c33838ce..005f581f4baa 100644
--- a/drivers/ddr/imx/imx8ulp/Kconfig
+++ b/drivers/ddr/imx/imx8ulp/Kconfig
@@ -5,7 +5,7 @@ config IMX8ULP_DRAM
bool "imx8m dram"
config IMX8ULP_DRAM_PHY_PLL_BYPASS
- bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK "
+ bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK"
depends on IMX8ULP_DRAM
config SAVED_DRAM_TIMING_BASE
--
2.44.0
