[PATCH 1/3] clk/qcom: apq8016: return valid rate when setting UART clock

[Caleb Connolly]

The clk_init_uart() helper always returns 0, but we're meant to return a
real clock rate. Given that we hardcode 115200 baud, just return the
clock rate that we set.

Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
 drivers/clk/qcom/clock-apq8016.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 5a5868169c89..6210fba87984 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -99,10 +99,10 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong 
rate)
        case GCC_SDCC2_APPS_CLK: /* SDC2 */
                return clk_init_sdc(priv, 1, rate);
                break;
        case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */
-               return apq8016_clk_init_uart(priv->base);
-               break;
+               apq8016_clk_init_uart(priv->base);
+               return 7372800;
        default:
                return 0;
        }
 }

-- 
2.44.0