Hi,
On 4/9/24 17:02, Patrice Chotard wrote:
As indicated in kernel led dt-bindings, label is a deprecated
property, so remove it and use red led node's name instead
for u-boot,error-led property.
Rename "red" led node's name to "led-red".
Remove status property which is useless.
Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com>
---
arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
index 8760d6c7d93..e61814fd66e 100644
--- a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
@@ -14,7 +14,7 @@
config {
u-boot,boot-led = "heartbeat";
- u-boot,error-led = "error";
+ u-boot,error-led = "led-red";
u-boot,mmc-env-partition = "u-boot-env";
st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
};
@@ -36,10 +36,8 @@
};
led {
- red {
- label = "error";
+ led-red {
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
- status = "okay";
};
};
};
Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com>
Thanks
Patrick
