On 2024/4/22 14:28, Jonas Karlman wrote:
SPL_ROCKCHIP_BACK_TO_BROM should normally only be enabled when BROM should load U-Boot binary. SPL on Anbernic RGxx3 devices load TF-A and U-Boot proper from FIT images and does never jump back to BROM from SPL. Remove the superfluous Kconfig option from defconfig to align with other RK356x boards. This patch have no intended change in boot behavior. Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- v3: No change v2: No change --- configs/anbernic-rgxx3-rk3566_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig index c8c9238f96fc..24b050c59b53 100644 --- a/configs/anbernic-rgxx3-rk3566_defconfig +++ b/configs/anbernic-rgxx3-rk3566_defconfig @@ -6,9 +6,7 @@ CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=2 CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y -CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y CONFIG_DEBUG_UART_BASE=0xFE660000
