Applied, thanks. (b4 didn't seem to detect this series properly, hence the manual mail).
On 12/04/2024 11:54, Sumit Garg wrote:
SE HMIBSC board is based on Qcom APQ8016 SoC. One of the major difference from db410c is serial port where HMIBSC board uses UART1 as the debug console with an RS232 port, patch #2 - #5 adds corresponding driver support. Patch #6 adds main HMIBSC board specific bits, features: - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) - 2GiB RAM - 64GiB eMMC, SD slot - WiFi and Bluetooth - 2x Host, 1x Device USB port - HDMI - Discrete TPM2 chip over SPI Features enabled in U-Boot: - RAUC updates (refer [2] for more details) - Environment protection - USB based ethernet adaptors Feedback is very much welcome. Changes in v4: - Rebased on top of qcom-main [4]. - Split out board DTS patch as #6. - Convert to text based environment as hmibsc.env. - MMC regression has been reported for qcom-main branch here [5]. - Collected further review tag. Changes in v3: - Rebased on top of qcom-next [1]. - Collected some review tags. - Incorporated misc. comments from Caleb and Stephen. - Split patch#4 as requested. - Linux HMIBSC board DTS has already been reviewed here [3], I have incorporated that for U-Boot too. Changes in v2: - Rebased on top on qcom-next [1]. - Added patch#1 as a fix for generic qcom board support. - Added patch#4 to enable driving GPIO pins based on pinctrl configuration. This replaces the custom GPIO configuration. - Added proper DTS file for HMIBSC board based on Linux DT pattern. - Merged board support patches into a single patch#5. [1] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-next?ref_type=heads [2] https://rauc.readthedocs.io/en/latest/ [3] https://lore.kernel.org/linux-kernel/20240403043416.3800259-4-sumit.g...@linaro.org/ [4] https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commits/qcom-main/?ref_type=heads [5] https://lore.kernel.org/all/cafa6wyo+3vroudfuvh390taviqx8pmqroqdtsn0yu6bd5yy...@mail.gmail.com/ Sumit Garg (7): qcom: Don't enable LINUX_KERNEL_IMAGE_HEADER by default apq8016: Add support for UART1 clocks and pinmux serial_msm: Enable RS232 flow control pinctrl: qcom: Add support for driving GPIO pins output pinctrl: qcom: apq8016: Add GPIO pinctrl function arm: dts: qcom: Add Schneider HMIBSC board dts board: add support for Schneider HMIBSC board arch/arm/Kconfig | 2 +- arch/arm/dts/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++++++ board/schneider/hmibsc/MAINTAINERS | 6 + board/schneider/hmibsc/hmibsc.env | 40 ++ configs/hmibsc_defconfig | 87 ++++ doc/board/index.rst | 1 + doc/board/schneider/hmibsc.rst | 45 ++ doc/board/schneider/index.rst | 9 + drivers/clk/qcom/clock-apq8016.c | 38 +- drivers/pinctrl/qcom/pinctrl-apq8016.c | 2 + drivers/pinctrl/qcom/pinctrl-qcom.c | 25 +- drivers/serial/serial_msm.c | 24 +- include/configs/hmibsc.h | 16 + 13 files changed, 760 insertions(+), 26 deletions(-) create mode 100644 arch/arm/dts/apq8016-schneider-hmibsc.dts create mode 100644 board/schneider/hmibsc/MAINTAINERS create mode 100644 board/schneider/hmibsc/hmibsc.env create mode 100644 configs/hmibsc_defconfig create mode 100644 doc/board/schneider/hmibsc.rst create mode 100644 doc/board/schneider/index.rst create mode 100644 include/configs/hmibsc.h
-- // Caleb (they/them)
