On 2024/4/25 18:46, Quentin Schulz wrote:
From: Quentin Schulz <quentin.sch...@theobroma-systems.com>

RK3588-based devices now support creating DRAM banks with proper holes
by reading the ATAGS from Rockchip TPL blob, so let's use that mechanism
instead.

Since ft_board_setup isn't defined anymore, there's no need for
selecting CONFIG_OF_BOARD_SETUP.

Similarly, because the quartzpro64-rk3588.c would be empty, it is simply
removed, with the (would-be-empty) Makefile as well.

The CONFIG_NR_DRAM_BANK now defaults to 10 which is a safe bet for
reading banks from ATAGS, so let's use the default value instead.

Co-developed-by: Chris Morgan <macromor...@hotmail.com>
Signed-off-by: Chris Morgan <macromor...@hotmail.com>
Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>

Thanks,
- Kever
---
  board/pine64/quartzpro64-rk3588/Makefile           |  3 --
  .../pine64/quartzpro64-rk3588/quartzpro64-rk3588.c | 39 ----------------------
  configs/quartzpro64-rk3588_defconfig               |  2 --
  3 files changed, 44 deletions(-)

diff --git a/board/pine64/quartzpro64-rk3588/Makefile 
b/board/pine64/quartzpro64-rk3588/Makefile
deleted file mode 100644
index 47819d9be93..00000000000
--- a/board/pine64/quartzpro64-rk3588/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier:     GPL-2.0+
-
-obj-y += quartzpro64-rk3588.o
diff --git a/board/pine64/quartzpro64-rk3588/quartzpro64-rk3588.c 
b/board/pine64/quartzpro64-rk3588/quartzpro64-rk3588.c
deleted file mode 100644
index bda804a89e2..00000000000
--- a/board/pine64/quartzpro64-rk3588/quartzpro64-rk3588.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2023 Google, Inc
- */
-
-#include <fdtdec.h>
-#include <fdt_support.h>
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int quartzpro64_add_reserved_memory_fdt_nodes(void *new_blob)
-{
-       struct fdt_memory gap1 = {
-               .start = 0x3fc000000,
-               .end = 0x3fc4fffff,
-       };
-       struct fdt_memory gap2 = {
-               .start = 0x3fff00000,
-               .end = 0x3ffffffff,
-       };
-       unsigned long flags = FDTDEC_RESERVED_MEMORY_NO_MAP;
-       unsigned int ret;
-
-       /*
-        * Inject the reserved-memory nodes into the DTS
-        */
-       ret = fdtdec_add_reserved_memory(new_blob, "gap1", &gap1,  NULL, 0,
-                                        NULL, flags);
-       if (ret)
-               return ret;
-
-       return fdtdec_add_reserved_memory(new_blob, "gap2", &gap2,  NULL, 0,
-                                         NULL, flags);
-}
-
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-       return quartzpro64_add_reserved_memory_fdt_nodes(blob);
-}
-#endif
diff --git a/configs/quartzpro64-rk3588_defconfig 
b/configs/quartzpro64-rk3588_defconfig
index b2a66d3f2db..e398c7c2c0e 100644
--- a/configs/quartzpro64-rk3588_defconfig
+++ b/configs/quartzpro64-rk3588_defconfig
@@ -3,7 +3,6 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
  CONFIG_SYS_HAS_NONCACHED_MEMORY=y
  CONFIG_COUNTER_FREQUENCY=24000000
  CONFIG_ARCH_ROCKCHIP=y
-CONFIG_NR_DRAM_BANKS=2
  CONFIG_DEFAULT_DEVICE_TREE="rk3588-quartzpro64"
  CONFIG_ROCKCHIP_RK3588=y
  CONFIG_SPL_SERIAL=y
@@ -19,7 +18,6 @@ CONFIG_FIT_VERBOSE=y
  CONFIG_SPL_FIT_SIGNATURE=y
  CONFIG_SPL_LOAD_FIT=y
  CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_OF_BOARD_SETUP=y
  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-quartzpro64.dtb"
  # CONFIG_DISPLAY_CPUINFO is not set
  CONFIG_DISPLAY_BOARDINFO_LATE=y

Reply via email to