Hi Neha, On 16:09-20240508, Neha Malcom Francis wrote: > Hi Manorit, > > On 08/05/24 12:56, Manorit Chawdhry wrote: > > Update the file with the required nodes from J721s2 R5 file to start > > using k3-am68-sk-r5 file for AM68. > > > > Signed-off-by: Manorit Chawdhry <m-chawd...@ti.com> > > --- > > What's the motivation behind this patch vs. squashing it into patch 5/6? >
Could've squashed it ig, I think developed it in this order so this remained. Would squash it. Also realised that I should be putting that patch before the config split otherwise am68 boot would break again. Would take that up as well in v2. Thanks for the review! Regards, Manorit > > arch/arm/dts/k3-am68-sk-r5-base-board.dts | 5 ++++- > > 1 file changed, 4 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/dts/k3-am68-sk-r5-base-board.dts > > b/arch/arm/dts/k3-am68-sk-r5-base-board.dts > > index 695aadc287bd..038b08dc3e01 100644 > > --- a/arch/arm/dts/k3-am68-sk-r5-base-board.dts > > +++ b/arch/arm/dts/k3-am68-sk-r5-base-board.dts > > @@ -24,7 +24,8 @@ > > compatible = "ti,am654-rproc"; > > reg = <0x0 0x00a90000 0x0 0x10>; > > power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>, > > - <&k3_pds 202 TI_SCI_PD_EXCLUSIVE>; > > + <&k3_pds 202 TI_SCI_PD_EXCLUSIVE>, > > + <&k3_pds 4 TI_SCI_PD_EXCLUSIVE>; > > resets = <&k3_reset 202 0>; > > clocks = <&k3_clks 61 1>; > > assigned-clocks = <&k3_clks 61 1>, <&k3_clks 202 0>; > > @@ -54,10 +55,12 @@ > > &secure_proxy_mcu { > > bootph-pre-ram; > > + status = "okay"; > > }; > > &secure_proxy_sa3 { > > bootph-pre-ram; > > + status = "okay"; > > }; > > &cbass_mcu_wakeup { > > > > -- > Thanking You > Neha Malcom Francis