With this series the Milk-V Mars CM board can be booted.
NVMe, SD-card, Ethernet, UART are working but not USB.
The first series Milk-V Mars CM Lite board (the version without eMMC)
uses incorrect series numbers indicating eMMC presence. For these
CONFIG_STARFIVE_NO_EMMC=y must be set to indicate that eMMC is not
present.
Thanks to E. Shattow for all the helpful discussions.
He figured out what needed to be patched in the device-tree.
v4:
Documentation fixes
v3:
Add mac vendor sub-command
Documentation fixes
v2:
fix typos in get_mmc_size_from_eeprom() description
rename spl_fdt_fixup_marc() to spl_fdt_fixup_mars_cm()
rename device-trees for Mars CM and Mars CM Lite
change model and compatible properties
refer to tio as tool for booting via UART
describe how to update serial number
Heinrich Schuchardt (5):
board: starfive: function to read eMMC size
board: add support for Milk-V Mars CM
doc: Milk-V Mars CM and Milk-V Mars CM Lite
configs: visionfive2: enable SPL_YMODEM_SUPPORT
starfive: add mac vendor sub-command
arch/riscv/include/asm/arch-jh7110/eeprom.h | 7 +
board/starfive/visionfive2/Kconfig | 9 +
board/starfive/visionfive2/spl.c | 28 ++-
.../visionfive2/starfive_visionfive2.c | 11 +-
.../visionfive2/visionfive2-i2c-eeprom.c | 43 +++-
configs/starfive_visionfive2_defconfig | 1 +
doc/board/starfive/index.rst | 1 +
doc/board/starfive/milk-v_mars_cm.rst | 193 ++++++++++++++++++
8 files changed, 290 insertions(+), 3 deletions(-)
create mode 100644 doc/board/starfive/milk-v_mars_cm.rst
--
2.43.0
