The axp<xxx>.c drivers are only used for the SPL, for U-Boot proper we have a separate, DM compliant driver. Mask the build instructions with CONFIG_SPL_BUILD, to avoid them being build for U-Boot proper as well.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com> --- drivers/power/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 41ebb494fff..9d1f4c65262 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/ obj-y += pmic/ obj-y += regulator/ +ifdef CONFIG_SPL_BUILD obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP221_POWER) += axp221.o @@ -16,6 +17,7 @@ obj-$(CONFIG_AXP313_POWER) += axp313.o obj-$(CONFIG_AXP717_POWER) += axp717.o obj-$(CONFIG_AXP809_POWER) += axp809.o obj-$(CONFIG_AXP818_POWER) += axp818.o +endif obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_SY8106A_POWER) += sy8106a.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o -- 2.35.8
