Hi, On Fri, 12 Apr 2024 22:26:00 +0200, A. Sverdlin wrote: > From: Alexander Sverdlin <alexander.sverd...@siemens.com> > > While there are happy users who successfully have been using DFU on TI > AM62x [1][2], there are also others who were not so lucky up to now [3]. > > I felt into latter category and was wondering why I observe this: > > [...]
Thanks, Applied to https://source.denx.de/u-boot/custodians/u-boot-dfu (u-boot-dfu) [1/6] usb: dwc3: gadget: combine return points into a single one https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/13395507ca1f48de25e70f4d27f709b1a4fa0a82 [2/6] usb: dwc3: gadget: clear SUSPHY bit before ep cmds https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/967b31c3ccdc09284a4447ebc4577bb7ef06d500 [3/6] usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/d107a5319e20d5e5be3bd8fa298aeca9ef4990a0 [4/6] usb: dwc3: gadget: Check ENBLSLPM before sending ep command https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/db11351a887e20ff86e3a4c1f466d3d8dd42754a [5/6] usb: dwc3: gadget: properly check ep cmd https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/95b4d655a44626f888bf823a0561a175d456d33a [6/6] usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer https://source.denx.de/u-boot/custodians/u-boot-dfu/-/commit/30f39de786ff3a87006461903e41a48c811ee764 -- Mattijs